(Difference between revisions)
 
(2 intermediate revisions not shown)
Line 1: Line 1:
{{CRLtemplate|File:ID_red_tunic.jpg|Tunic, Red|
{{CRLtemplate|File:ID_red_tunic.jpg|Tunic, Red|
-
*Fabric should be a medium weight suiting material exactly matching the pants and hat. Gabardine style weave is most accurate.  
+
*Fabric is a medium weight suiting material exactly matching the pants.
 +
**Gabardine style weave is most accurate.
*Tunic is double-breasted with a left over right closure on the tapered yoke.
*Tunic is double-breasted with a left over right closure on the tapered yoke.
*Yoke comes up across the shoulder to the top shoulder seam.
*Yoke comes up across the shoulder to the top shoulder seam.
-
*The standing collar has square corners and is about 1.25" (31.8 mm) tall and closes snugly and includes a modesty panel behind closure. Collar edges are closed with two eye hooks.  
+
*The standing collar has square corners and is about 1.25" (31.8 mm) tall.
 +
**Collar closes snugly and includes a modesty panel behind closure.
 +
**Collar edges are closed with two eye hooks.
*There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
*There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
-
*Sleeves are long, and without decoration, cuffs or buttons, containing 2 seams, one along the bottom and one along the back.
+
*Sleeves are long, and without decoration, cuffs or buttons.
-
*Tunic should be constructed with no top-stitching (stitches visible on the exterior surface of fabric)|
+
*Sleeves contain 2 seams.
 +
**One along the bottom and one along the back.
 +
*Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric)|
*There is a dart of about 2" (50.8 mm) in the top center of the yoke.
*There is a dart of about 2" (50.8 mm) in the top center of the yoke.
-
*Additionally there is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
+
*There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
*The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center.|
*The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center.|
-
* Tunic must be secured on the right side by snaps or buttons, not Velcro. There is no topstitching visible anywhere and it must have a lining sewn in. }}
+
*Tunic is secured on the right side by snaps or buttons.
 +
**Not hook and loop fastener (Velcro).
 +
*There is no top-stitching visible anywhere.
 +
*A lining is sewn in.}}

Latest revision as of 22:10, 13 July 2014

ID red tunic.jpg Tunic, Red
For 501st approval:
  • Fabric is a medium weight suiting material exactly matching the pants.
    • Gabardine style weave is most accurate.
  • Tunic is double-breasted with a left over right closure on the tapered yoke.
  • Yoke comes up across the shoulder to the top shoulder seam.
  • The standing collar has square corners and is about 1.25" (31.8 mm) tall.
    • Collar closes snugly and includes a modesty panel behind closure.
    • Collar edges are closed with two eye hooks.
  • There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
  • Sleeves are long, and without decoration, cuffs or buttons.
  • Sleeves contain 2 seams.
    • One along the bottom and one along the back.
  • Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric)
For level two certification (if applicable):
  • There is a dart of about 2" (50.8 mm) in the top center of the yoke.
  • There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
  • The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center.
For level three certification (if applicable):
  • Tunic is secured on the right side by snaps or buttons.
    • Not hook and loop fastener (Velcro).
  • There is no top-stitching visible anywhere.
  • A lining is sewn in.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.