Databank - User contributions [en]

Costuming:Imperialbuckle

2013-03-04T14:47:55Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:Buckle_cb.png|CostumeBase / CostumeBay Buckle|
The Costumebase buckle is not acceptable for two main reasons:
*The corners are too round
*The size is inaccurate.

The cost of a CB belt & buckle is comparable to the cost of purchasing the parts and building your own more accurate belt, and because of that comparative cost, the CB buckle has been disqualified for 501st membership.|| }}

{{CRLtemplate-nolevels|File:Duty belt trident.jpg|Fan Made Imperial Belt Buckle|
The imperial buckle should be shaped as shown in this sample image. | | }}

Costuming:TK hwt

2012-12-21T21:08:26Z

Stormtrooperguy:

{{CRLheader|Stormtrooper, Heavy Weapons Trooper|File:TK_hwt_full.jpeg|TK-2918|Dan Brown}}



{{CRLdetinfo| 1116 |Stormtrooper, Heavy Weapons Trooper (HWT)|TK|Star Wars Battlefront|
Heavy Weapons Troopers ( A.K.A. Shock Troopers) are an elite unit of the Imperial Stormtrooper Corps, specializing in the use of various non-standard weapons and equipment. Their armor is extra heavy plated compared to the standard Stormtrooper armor. Some, equipped with rocket launchers, act as anti-vehicle units on the battlefield. They are trained to hit hard targets and to guard strategic locations. The Heavy Weapons Troopers operate as splinter units, backing up standard garrisons and fulfilling unique roles on the battlefield.

Rebellion slang terms and nicknames for Stormtroopers:

* Whitehats
* Plastic Soldiers
* Boys in White
* Plastic Boys
* Stormies
}}

{{CRLfisdlevels}}

{{CRLgmlapproval}}



{{CRLrequirements}}

{{CRLtemplate|File:TK_anh_stunt_helmet.jpeg|Helmet|
*Traps (trapezoids on dome of helmet) and tears (area beneath the corners of eye lenses) are gray.
*Rear traps and tears have vertical black lines.
*Lenses are flat material, green in color, sufficiently dark enough to obscure the costumer's eyes.
*The "ear" bars have three or four bumps and should be gray or painted gray, with a black outline. Painting the bumps with rank stripes (highlighted) in black is optional.
*Frown is painted gray and does not leave the teeth area. Eight total teeth on the frown are cut out.
*Tube stripes are medium blue, numbering between 9 and 16 per side with the curve bends extending backwards.
*Vocoder (vertically ribbed chin detail) is painted black.
*Aerators/Hovi mix tips (cylinders on either side of the vocoder) are black or painted black.
*Tears, traps, and tube stripes may be hand painted, decals, or decals that replicate hand painted.
*Mesh may be used behind the frown to obscure the face of the wearer.
*Note: The FX helmet is considered deprecated (to be avoided), though is acceptable for Legion requirements.
*Note: A stock (out of the box) MRCE and/or EFX PCR helmet does not meet the basic 501st requirements without the major modification that are necessary. Please visit FISD/whitearmor.net for more info on these modifications. |
*Ears should have three screws used per side, one above and below the ear bar and one at the base of the helmet.
*Ear bars should have four bumps only, not three.
*Traps/tears and tube stripes shall have the correct ANH TK details.
*Correct 'Hovi mic' aerator tips.
*FX helmets are not allowed.
*Helmet and details/paint should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).|
*MRCE and/or EFX PCR helmets are not allowed.
*ANHv2 helmets are not allowed.
*Ear bars shall have only one or two bumps painted in black (rank stripes).
*Neck trim shall be of an s-type profile rather than a u-type profile.
*Tears/traps shall be hand painted or use decals that emulate hand painted (with correct ANH TK details). }}

{{CRLtemplate|File:TK_anh_stunt_neckseal.jpeg|Neck Seal|
*Black with horizontal ribs, fitted to the wearer, and extending from the base of the neck to the top of the Adam's apple.| | }}

{{CRLtemplate|File:TK_hwt_pauldron.jpeg|Pauldron|
*A black, orange, or white neck ornament made of leather or a leather-like material, worn over the right shoulder.| |
*Pauldron shall be of the puffy variety. Older style flat and off color pauldrons are not allowed.
*Only orange shoulder pauldrons are acceptable for Centurion.
}}

{{CRLtemplate|File:TK_hwt_pouches.jpeg|Ammo Pouches|
*Black in color, made of canvas, leather or leather-like German MP-40 style ammo pouches. There shall be two minimum : one pouch on the left shoulder and one on the right hip. A third worn on the opposite hip is allowed.| |
*The shoulder pouch is mandatory.
}}

{{CRLtemplate|File:TK_anh_stunt_shoulders.jpeg|Shoulder Straps|
*These shall be securely mounted in front and may free float in back. They may be affixed with rivets, Velcro, or adhesive. |
*No visible rivets are allowed.
*Shoulder straps should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*These shall be glued in front.
}}

{{CRLtemplate|File:TK_anh_stunt_shoulder.jpeg|Shoulder Bells|
*One on each shoulder. The shoulder bells are considered effectively symmetrical; they may worn interchangeably on the left and right shoulders and should have a black elastic strap that wraps around the inside of the bicep. |
*Shoulder bells should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).| }}

{{CRLtemplate|File:TK_anh_stunt_biceps.jpeg|Biceps|
*Biceps are fully closed. |
*Biceps should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).| }}



{{CRLtemplate|File:TK_anh_stunt_forearms.jpeg|Forearms|
*Forearms are fully closed |
*Forearms should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*No return edge on the inside of the front of the forearm is allowed.
}}

{{CRLtemplate|File:TK_anh_stunt_handplates.jpeg|Hand Plates|
*Roughly pentagonal in shape, the hand plates are mounted securely over the back of the glove. As an alternative to plastic, these may be made out of latex or latex-like material. |
*Hand plates should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Hand guards shall be latex or latex-like, painted white, affixed to rubber gloves in lieu of plastic hand guards.
}}

{{CRLtemplate|File:TK_anh_stunt_gloves.jpeg|Gloves|
*Black in color, made of either rubber, nomex, leather, or leather-like material, with no visible straps or logos/designs. The fingers are enclosed, non-textured.| |
*Gloves shall be rubber or rubber-like chemical gloves, in black.}}

{{CRLtemplate|File:TK_anh_stunt_chest.jpeg|Chest|
*Chest plate overlaps the abdominal plate. |
*Chest plate should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Chest and back shall be connected with a white fabric or preferably elastic strap at the shoulders.
*Ideally the AM/FX style chest plate should be replaced with a more screen accurate type. If using an AM/FX style chest plate, the bottom and sides shall be trimmed and a new return edge shall be added at the bottom to eliminate the over elongated appearance and to give a more accurate look. See the tutorial: http://www.whitearmor.net/fisd/Tutorial-chestback
}}


{{CRLtemplate|File:TK_anh_stunt_back.jpeg|Back|
*Back plate contains a "O II" design.|
*The Back plate should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Back plate shall have no, or minimal overlap of the kidney plate.
*Ideally the AM/FX style back plate should be replaced with a more screen accurate type. If using an AM/FX style back plate it shall have no, or minimal overlap of the kidney plate. and shall be reshaped to emulate a screen used back plate by properly trimming and re-shaping (stretching) the left and right edges of the armor to contour to your body. Note: There is currently no tutorial available for this, but you can see an example of this Mod and visual comparison at whitearmor.net }}

{{CRLtemplate|File:TK_anh_stunt_undersuit.jpeg|Under Suit|
*Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos/designs.| | }}

{{CRLtemplate|File:TK_anh_stunt_ab.jpeg|Abdomen Plate|
*The Ab plate has a button area that matches the color pattern shown (3 blue + 6 gray); buttons are approximately 7/16" (11mm) in diameter. |
*Any gap between the ab and kidney plate shall be no more than 1/2" (12.5mm) wide. Any shims used to achieve this effect should be of a similar material and color as the ab and kidney plate. Shims shall fit flush and seams are allowed.
*Ab plate and details/paint should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Ideally there should be no gap between the ab and kidney plates, just a single visible seam line.
*Rivets on the left side of the ab plate: a total of three rivets, the heads should be approximately 5/16"(8mm) diameter and equally spaced out along the depth of the armor and about 10mm from the edge. They may be painted white, or not. Note:For the original used TK armor, this type of rivets where, bifurcated rivets or split rivet.
*A single male snap on the top right corner of the ab plate shall be present.
*A single split rivet or brad shall be present on the crotch tab of the ab plate. It does not need to be functional.
}}

{{CRLtemplate|File:TK_anh_stunt_kidney.jpeg|Kidney Plate|
*It is allowable to have a single kidney/butt plate for 501st requirements. If a separate kidney plate is used, it should line up with the ab plate, with the top of the kidney plate being flush to or under the back plate.|
*A separate kidney plate shall be present, split from the butt plate.
*Kidney plate should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Three rivets shall be present on the left side of the kidney plate, the heads should be approximately 5/16"(8mm) diameter and equally spaced out along the depth of the armor and about 10mm from the edge. They may be painted white, or not. Note: For the original used TK armor, this type of rivets where, bifurcated rivets or split rivet.
}}

{{CRLtemplate|File:TK_anh_stunt_butt.jpeg|Butt Plate|
*It is allowable to have a single butt/kidney plate for 501st requirements. If a separate butt plate is used, it should be below the bottom of the belt and line up with the kidney plate, with a minimal gap between it and the kidney plate.|
*A separate butt plate is required, split from the kidney plate.
*Butt plate should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).|
*Two male snaps shall be present on the crotch tab of the butt plate. They do not need to be functional.
}}

{{CRLtemplate|File:Shock trooper.jpg|Belt|
*Belt face is made of plastic (TK ammo belt).
*Belt proper is made of canvas, canvas covered material, leather, or vinyl, 3” (75mm) to 3.5” (90mm) wide. The color is be white to off-white.
*It is allowable to have drop boxes for the 501st requirements. If the drop boxes are used, they should dangle from the sides of the front plastic belt (ammo belt) via white straps and are aligned under the plastic tabs of the ammo belt.|
*Drop boxes are not allowed.
*Belt shall be canvas or canvas covered, and should be lightly aged,(battle worn), but not weathered like a Sandtrooper (TD). Leather and vinyl are not acceptable.
*There shall be three square buttons, one centered in the middle and one on each end of the plastic ammo belt.
*Belt face(TK ammo belt)should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*The corners of the plastic ammo belt shall be trimmed at a 45 degree angle.
}}


{{CRLtemplate|File:TK_anh_stunt_detonator.jpeg|Thermal Detonator|
*(a.k.a. O2 canister) attaches to the back of the belt. This is a gray cylinder between 2”(50mm) and 2.5" (64mm) in diameter with white end caps on each end, and a white control panel pad, with controls closest to the right end cap.

*Note: The Thermal Detonator should be omitted from this costume when a pack is worn.| | }}

{{CRLtemplate|File:TK_anh_stunt_thighs.jpeg|Thighs|
*Thigh armor shall be closed in the back.
*The small ammo belt is installed on the bottom of the right thigh.|
*The thigh should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*The thigh ammo belt shall be connected by brads/split rivets only – but not by standard rivets.
*The bottom corners of the thigh ammo belt shall be rounded off.
}}

{{CRLtemplate|File:TK_anh_stunt_shins.jpeg|Lower Legs|
*Greaves close in the back. The trapezoid knee plate (sniper knee plate) is affixed to the left greave and may have two visible brads or rivets securing it to the greave.
*The AM greaves (shins) shall be on the proper legs, with a new cover strip. The cover strip edge shall be facing the inside of the leg. Note: There is a manufacturer defect with the AM greaves (shins) that may cause you to wear the them improperly. Please see the Tutorial titled :"AM armor shins: the proper way to assemble and wear", on the whitearmor.net |
*The greaves should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Ideally there should be no visible rivets or brads used to secure the sniper plate to the left greave.}}

{{CRLtemplate|File:TK_anh_stunt_boots.jpeg|Boots|
*White leather or leather-like, above ankle height, with a flat sole with a short heel, and small U-shaped elastic sections on both sides of the ankle with no buckles or laces. Jodhpur/Chelsea-type boots or an equivalent style is acceptable. Elvis or Mariachi boots are not allowed.| |
*There shall be no seam on the front of the boot (e.g. CABoots are not allowed).
*Boots shall be lightly scuffed.}}

{{CRLtemplate|File:TK_anh_stunt_holster.jpeg|Holster|
*It is allowable to have a holster for the 501st requirements. If a holster is worn, it will be made of black leather or leather-like material, and worn on the left hip side of belt in lieu of the third ammo pouch. |
*Holster is not allowed.| }}

{{CRLtemplate|File:TK_hwt_backpack.jpeg|Backpack|
*Styled after the ANH Sandtrooper packs or a simplified pack as seen in the video game (Battlefront series).|
*Backpack should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).|
*If an ANH style Sandtrooper pack is used, it shall have the appropriate details for a specific ANH Sandtrooper, which is being referenced, but shall not be weathered like the ANH Sandtrooper, but lightly scuffed,(battle worn).
*If a game style pack is used, it shall closely match the simplified pack as seen in the video game (Battlefront series), but shall not be weathered like the ANH Sandtrooper, but lightly scuffed,(battle worn).
}}



{{CRLaccessories}}

{{CRLtemplate|File:TK_hwt_minimag.jpeg|Minimag PTL Missle Launcher|
*Based on the missle launcher as seen in the Star Wars Battlefront video game series.| |
*The Minimag PLT missile launcher is required for Centurion Status.
*Missle launcher shall closely match the video game reference (Battlefront series), including scope on the left side, stock, and pistol grip.}}

{{CRL-dlt19}}

{{CRL-rt97}}

{{CRL-t21}}



{{CRLtemplate|File:TK_anh_stunt_e11.jpeg|BlasTech E-11|
*Based on a real or replica Sterling sub-machine gun, scratch-built, or a modified commercial toy Stormtrooper blaster.|
*Folding stock (does not need to function).
*A real or replica ammo counter - based off of a Hengstler counter - shall be present.
*D-ring mounted on the rear.
*Correct style scope.
*Two power cylinders on the magazine housing.
*Scratch-built, resin cast, Hyperfirm rubber cast blasters shall have a total of 6 T-tracks on blaster (leaving the lowest row on the magazine housing side uncovered).
*If using the Hasbro E11 toy blaster and you cover all the rows of holes, the blaster will have 7 T-tracks total. But, if you want to have the correct number of T-tracks (6 total) with the lower row of open vent holes on the magazine housing side, then you shall cover the pre-existing rows of holes with T-tracks, and grind off the lower integrated T-track on the magazine housing side and drill a new row of holes in its place.
*No ESB/ROTJ greeblies are allowed on the blaster.|
*Hasbro blasters are not allowed, even conversions.}}

{{CRLtemplate|File:Tk_anh_hero_se14r.jpg|BlasTech SE-14R|
*The SE-14R blaster as seen the video game. It should have a correct scope if carried in lieu of the E-11.| |}}

{{CRLtemplate|File:TD binocs.jpg|Macrobinoculars|
*Styled after the ones used by the Sandtrooper in the Special Edition scenes of ANH..| | }}

{{CRLfooter|FISD_CRL|T}}

Costuming:TD hwt

2012-12-21T21:07:15Z

Stormtrooperguy: moved Costuming:TD hwt to Costuming:TK hwt over redirect: Changed category from TD to TK

#REDIRECT [[Costuming:TK hwt]]

Costuming:TK hwt

2012-12-21T21:07:15Z

Stormtrooperguy: moved Costuming:TD hwt to Costuming:TK hwt over redirect: Changed category from TD to TK

{{CRLheader|Stormtrooper, Heavy Weapons Trooper|File:TK_hwt_full.jpeg|TK-2918|Dan Brown}}



{{CRLdetinfo| 1116 |Stormtrooper, Heavy Weapons Trooper (HWT)|TD|Star Wars Battlefront|
Heavy Weapons Troopers ( A.K.A. Shock Troopers) are an elite unit of the Imperial Stormtrooper Corps, specializing in the use of various non-standard weapons and equipment. Their armor is extra heavy plated compared to the standard Stormtrooper armor. Some, equipped with rocket launchers, act as anti-vehicle units on the battlefield. They are trained to hit hard targets and to guard strategic locations. The Heavy Weapons Troopers operate as splinter units, backing up standard garrisons and fulfilling unique roles on the battlefield.

Rebellion slang terms and nicknames for Stormtroopers:

* Whitehats
* Plastic Soldiers
* Boys in White
* Plastic Boys
* Stormies
}}

{{CRLfisdlevels}}

{{CRLgmlapproval}}



{{CRLrequirements}}

{{CRLtemplate|File:TK_anh_stunt_helmet.jpeg|Helmet|
*Traps (trapezoids on dome of helmet) and tears (area beneath the corners of eye lenses) are gray.
*Rear traps and tears have vertical black lines.
*Lenses are flat material, green in color, sufficiently dark enough to obscure the costumer's eyes.
*The "ear" bars have three or four bumps and should be gray or painted gray, with a black outline. Painting the bumps with rank stripes (highlighted) in black is optional.
*Frown is painted gray and does not leave the teeth area. Eight total teeth on the frown are cut out.
*Tube stripes are medium blue, numbering between 9 and 16 per side with the curve bends extending backwards.
*Vocoder (vertically ribbed chin detail) is painted black.
*Aerators/Hovi mix tips (cylinders on either side of the vocoder) are black or painted black.
*Tears, traps, and tube stripes may be hand painted, decals, or decals that replicate hand painted.
*Mesh may be used behind the frown to obscure the face of the wearer.
*Note: The FX helmet is considered deprecated (to be avoided), though is acceptable for Legion requirements.
*Note: A stock (out of the box) MRCE and/or EFX PCR helmet does not meet the basic 501st requirements without the major modification that are necessary. Please visit FISD/whitearmor.net for more info on these modifications. |
*Ears should have three screws used per side, one above and below the ear bar and one at the base of the helmet.
*Ear bars should have four bumps only, not three.
*Traps/tears and tube stripes shall have the correct ANH TK details.
*Correct 'Hovi mic' aerator tips.
*FX helmets are not allowed.
*Helmet and details/paint should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).|
*MRCE and/or EFX PCR helmets are not allowed.
*ANHv2 helmets are not allowed.
*Ear bars shall have only one or two bumps painted in black (rank stripes).
*Neck trim shall be of an s-type profile rather than a u-type profile.
*Tears/traps shall be hand painted or use decals that emulate hand painted (with correct ANH TK details). }}

{{CRLtemplate|File:TK_anh_stunt_neckseal.jpeg|Neck Seal|
*Black with horizontal ribs, fitted to the wearer, and extending from the base of the neck to the top of the Adam's apple.| | }}

{{CRLtemplate|File:TK_hwt_pauldron.jpeg|Pauldron|
*A black, orange, or white neck ornament made of leather or a leather-like material, worn over the right shoulder.| |
*Pauldron shall be of the puffy variety. Older style flat and off color pauldrons are not allowed.
*Only orange shoulder pauldrons are acceptable for Centurion.
}}

{{CRLtemplate|File:TK_hwt_pouches.jpeg|Ammo Pouches|
*Black in color, made of canvas, leather or leather-like German MP-40 style ammo pouches. There shall be two minimum : one pouch on the left shoulder and one on the right hip. A third worn on the opposite hip is allowed.| |
*The shoulder pouch is mandatory.
}}

{{CRLtemplate|File:TK_anh_stunt_shoulders.jpeg|Shoulder Straps|
*These shall be securely mounted in front and may free float in back. They may be affixed with rivets, Velcro, or adhesive. |
*No visible rivets are allowed.
*Shoulder straps should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*These shall be glued in front.
}}

{{CRLtemplate|File:TK_anh_stunt_shoulder.jpeg|Shoulder Bells|
*One on each shoulder. The shoulder bells are considered effectively symmetrical; they may worn interchangeably on the left and right shoulders and should have a black elastic strap that wraps around the inside of the bicep. |
*Shoulder bells should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).| }}

{{CRLtemplate|File:TK_anh_stunt_biceps.jpeg|Biceps|
*Biceps are fully closed. |
*Biceps should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).| }}



{{CRLtemplate|File:TK_anh_stunt_forearms.jpeg|Forearms|
*Forearms are fully closed |
*Forearms should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*No return edge on the inside of the front of the forearm is allowed.
}}

{{CRLtemplate|File:TK_anh_stunt_handplates.jpeg|Hand Plates|
*Roughly pentagonal in shape, the hand plates are mounted securely over the back of the glove. As an alternative to plastic, these may be made out of latex or latex-like material. |
*Hand plates should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Hand guards shall be latex or latex-like, painted white, affixed to rubber gloves in lieu of plastic hand guards.
}}

{{CRLtemplate|File:TK_anh_stunt_gloves.jpeg|Gloves|
*Black in color, made of either rubber, nomex, leather, or leather-like material, with no visible straps or logos/designs. The fingers are enclosed, non-textured.| |
*Gloves shall be rubber or rubber-like chemical gloves, in black.}}

{{CRLtemplate|File:TK_anh_stunt_chest.jpeg|Chest|
*Chest plate overlaps the abdominal plate. |
*Chest plate should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Chest and back shall be connected with a white fabric or preferably elastic strap at the shoulders.
*Ideally the AM/FX style chest plate should be replaced with a more screen accurate type. If using an AM/FX style chest plate, the bottom and sides shall be trimmed and a new return edge shall be added at the bottom to eliminate the over elongated appearance and to give a more accurate look. See the tutorial: http://www.whitearmor.net/fisd/Tutorial-chestback
}}


{{CRLtemplate|File:TK_anh_stunt_back.jpeg|Back|
*Back plate contains a "O II" design.|
*The Back plate should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Back plate shall have no, or minimal overlap of the kidney plate.
*Ideally the AM/FX style back plate should be replaced with a more screen accurate type. If using an AM/FX style back plate it shall have no, or minimal overlap of the kidney plate. and shall be reshaped to emulate a screen used back plate by properly trimming and re-shaping (stretching) the left and right edges of the armor to contour to your body. Note: There is currently no tutorial available for this, but you can see an example of this Mod and visual comparison at whitearmor.net }}

{{CRLtemplate|File:TK_anh_stunt_undersuit.jpeg|Under Suit|
*Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos/designs.| | }}

{{CRLtemplate|File:TK_anh_stunt_ab.jpeg|Abdomen Plate|
*The Ab plate has a button area that matches the color pattern shown (3 blue + 6 gray); buttons are approximately 7/16" (11mm) in diameter. |
*Any gap between the ab and kidney plate shall be no more than 1/2" (12.5mm) wide. Any shims used to achieve this effect should be of a similar material and color as the ab and kidney plate. Shims shall fit flush and seams are allowed.
*Ab plate and details/paint should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Ideally there should be no gap between the ab and kidney plates, just a single visible seam line.
*Rivets on the left side of the ab plate: a total of three rivets, the heads should be approximately 5/16"(8mm) diameter and equally spaced out along the depth of the armor and about 10mm from the edge. They may be painted white, or not. Note:For the original used TK armor, this type of rivets where, bifurcated rivets or split rivet.
*A single male snap on the top right corner of the ab plate shall be present.
*A single split rivet or brad shall be present on the crotch tab of the ab plate. It does not need to be functional.
}}

{{CRLtemplate|File:TK_anh_stunt_kidney.jpeg|Kidney Plate|
*It is allowable to have a single kidney/butt plate for 501st requirements. If a separate kidney plate is used, it should line up with the ab plate, with the top of the kidney plate being flush to or under the back plate.|
*A separate kidney plate shall be present, split from the butt plate.
*Kidney plate should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Three rivets shall be present on the left side of the kidney plate, the heads should be approximately 5/16"(8mm) diameter and equally spaced out along the depth of the armor and about 10mm from the edge. They may be painted white, or not. Note: For the original used TK armor, this type of rivets where, bifurcated rivets or split rivet.
}}

{{CRLtemplate|File:TK_anh_stunt_butt.jpeg|Butt Plate|
*It is allowable to have a single butt/kidney plate for 501st requirements. If a separate butt plate is used, it should be below the bottom of the belt and line up with the kidney plate, with a minimal gap between it and the kidney plate.|
*A separate butt plate is required, split from the kidney plate.
*Butt plate should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).|
*Two male snaps shall be present on the crotch tab of the butt plate. They do not need to be functional.
}}

{{CRLtemplate|File:Shock trooper.jpg|Belt|
*Belt face is made of plastic (TK ammo belt).
*Belt proper is made of canvas, canvas covered material, leather, or vinyl, 3” (75mm) to 3.5” (90mm) wide. The color is be white to off-white.
*It is allowable to have drop boxes for the 501st requirements. If the drop boxes are used, they should dangle from the sides of the front plastic belt (ammo belt) via white straps and are aligned under the plastic tabs of the ammo belt.|
*Drop boxes are not allowed.
*Belt shall be canvas or canvas covered, and should be lightly aged,(battle worn), but not weathered like a Sandtrooper (TD). Leather and vinyl are not acceptable.
*There shall be three square buttons, one centered in the middle and one on each end of the plastic ammo belt.
*Belt face(TK ammo belt)should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*The corners of the plastic ammo belt shall be trimmed at a 45 degree angle.
}}


{{CRLtemplate|File:TK_anh_stunt_detonator.jpeg|Thermal Detonator|
*(a.k.a. O2 canister) attaches to the back of the belt. This is a gray cylinder between 2”(50mm) and 2.5" (64mm) in diameter with white end caps on each end, and a white control panel pad, with controls closest to the right end cap.

*Note: The Thermal Detonator should be omitted from this costume when a pack is worn.| | }}

{{CRLtemplate|File:TK_anh_stunt_thighs.jpeg|Thighs|
*Thigh armor shall be closed in the back.
*The small ammo belt is installed on the bottom of the right thigh.|
*The thigh should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*The thigh ammo belt shall be connected by brads/split rivets only – but not by standard rivets.
*The bottom corners of the thigh ammo belt shall be rounded off.
}}

{{CRLtemplate|File:TK_anh_stunt_shins.jpeg|Lower Legs|
*Greaves close in the back. The trapezoid knee plate (sniper knee plate) is affixed to the left greave and may have two visible brads or rivets securing it to the greave.
*The AM greaves (shins) shall be on the proper legs, with a new cover strip. The cover strip edge shall be facing the inside of the leg. Note: There is a manufacturer defect with the AM greaves (shins) that may cause you to wear the them improperly. Please see the Tutorial titled :"AM armor shins: the proper way to assemble and wear", on the whitearmor.net |
*The greaves should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
*Ideally there should be no visible rivets or brads used to secure the sniper plate to the left greave.}}

{{CRLtemplate|File:TK_anh_stunt_boots.jpeg|Boots|
*White leather or leather-like, above ankle height, with a flat sole with a short heel, and small U-shaped elastic sections on both sides of the ankle with no buckles or laces. Jodhpur/Chelsea-type boots or an equivalent style is acceptable. Elvis or Mariachi boots are not allowed.| |
*There shall be no seam on the front of the boot (e.g. CABoots are not allowed).
*Boots shall be lightly scuffed.}}

{{CRLtemplate|File:TK_anh_stunt_holster.jpeg|Holster|
*It is allowable to have a holster for the 501st requirements. If a holster is worn, it will be made of black leather or leather-like material, and worn on the left hip side of belt in lieu of the third ammo pouch. |
*Holster is not allowed.| }}

{{CRLtemplate|File:TK_hwt_backpack.jpeg|Backpack|
*Styled after the ANH Sandtrooper packs or a simplified pack as seen in the video game (Battlefront series).|
*Backpack should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).|
*If an ANH style Sandtrooper pack is used, it shall have the appropriate details for a specific ANH Sandtrooper, which is being referenced, but shall not be weathered like the ANH Sandtrooper, but lightly scuffed,(battle worn).
*If a game style pack is used, it shall closely match the simplified pack as seen in the video game (Battlefront series), but shall not be weathered like the ANH Sandtrooper, but lightly scuffed,(battle worn).
}}



{{CRLaccessories}}

{{CRLtemplate|File:TK_hwt_minimag.jpeg|Minimag PTL Missle Launcher|
*Based on the missle launcher as seen in the Star Wars Battlefront video game series.| |
*The Minimag PLT missile launcher is required for Centurion Status.
*Missle launcher shall closely match the video game reference (Battlefront series), including scope on the left side, stock, and pistol grip.}}

{{CRL-dlt19}}

{{CRL-rt97}}

{{CRL-t21}}



{{CRLtemplate|File:TK_anh_stunt_e11.jpeg|BlasTech E-11|
*Based on a real or replica Sterling sub-machine gun, scratch-built, or a modified commercial toy Stormtrooper blaster.|
*Folding stock (does not need to function).
*A real or replica ammo counter - based off of a Hengstler counter - shall be present.
*D-ring mounted on the rear.
*Correct style scope.
*Two power cylinders on the magazine housing.
*Scratch-built, resin cast, Hyperfirm rubber cast blasters shall have a total of 6 T-tracks on blaster (leaving the lowest row on the magazine housing side uncovered).
*If using the Hasbro E11 toy blaster and you cover all the rows of holes, the blaster will have 7 T-tracks total. But, if you want to have the correct number of T-tracks (6 total) with the lower row of open vent holes on the magazine housing side, then you shall cover the pre-existing rows of holes with T-tracks, and grind off the lower integrated T-track on the magazine housing side and drill a new row of holes in its place.
*No ESB/ROTJ greeblies are allowed on the blaster.|
*Hasbro blasters are not allowed, even conversions.}}

{{CRLtemplate|File:Tk_anh_hero_se14r.jpg|BlasTech SE-14R|
*The SE-14R blaster as seen the video game. It should have a correct scope if carried in lieu of the E-11.| |}}

{{CRLtemplate|File:TD binocs.jpg|Macrobinoculars|
*Styled after the ones used by the Sandtrooper in the Special Edition scenes of ANH..| | }}

{{CRLfooter|FISD_CRL|T}}

Costuming:FISD CRL

2012-12-21T21:06:53Z

Stormtrooperguy: /* First Imperial Stormtrooper Detachment */

= First Imperial Stormtrooper Detachment =

For more information on any of these costumes, visit {{#deturl:1116}}

{{#crllist:1|1116}}

== Versions française ==

S'il vous plaît voir les liens ci-dessous pour le français des versions traduites.

*[[Costuming:TD_hwt_fr|TD - Stormtrooper: Heavy Weapons Trooper]]
*[[Costuming:TK_commander_fr|TK - Stormtrooper: Stormtrooper Commander]]
*[[Costuming:TK_anh_hero_fr|TK - Stormtrooper: ANH Hero]]
*[[Costuming:TK_anh_stunt_fr|TK - Stormtrooper: ANH Stunt]]
*[[Costuming:TK_esb_fr|TK - Stormtrooper: Empire Strikes Back]]
*[[Costuming:TK_incinerator_fr|TK - Stormtrooper: Incinerator Trooper]]
*[[Costuming:TK_rotj_fr|TK - Stormtrooper: Return of the Jedi]]

Template:CRLtemplate-onelevel

2012-06-12T14:47:34Z

Stormtrooperguy: Created page with "{|style="background-color:#ffffff; text-align:left" width="100%" cellspacing="10" |- |style="text-align:left;" valign="top" width=170 rowspan="3"|150px |style="text-a..."

{|style="background-color:#ffffff; text-align:left" width="100%" cellspacing="10"
|-
|style="text-align:left;" valign="top" width=170 rowspan="3"|[[{{{1}}}|150px]]
|style="text-align:left;" valign="top"|{{{2}}} For 501st approval: {{{3}}} 
|-
|For level two certification (if applicable): {{{4}}}
|-
|align="center" colspan="2"|

|}

Costuming:TI TIE Pilot ANH

2012-06-08T19:05:16Z

Stormtrooperguy:

{{CRLheader|TIE Pilot, A New Hope|File:TI_pilot_anh.jpg|TI 6854|Ed Eliason}}



{{CRLdetinfo| 1102 |TIE Pilot, ANH|TI|Star Wars Episode 4|
TIE pilots served in the Imperial Navy by piloting the various TIE series starfighters.}}

{{CRLjrslevels}}

{{CRLgmlapproval}}



{{CRLrequirements}}

{{CRLtemplate-nolevels|File:TI_rotj_helmet.jpg|Helmet|
*See the [[Costuming:TI_TIE_Pilot_Helmet-detail|TIE Helmet Detail page]] for more views and information about canon paint schemes.
*Helmet may have flat or bubbled lenses in Dark Gray or Dark Green.
*The helmet must also have imperial disks (greeblies) on the ear wells.
*Two 2.75" diameter Imperial Emblems in either white or silver should be on the crest of the helmet as seen in the diagrams below.
*The frown between the teeth may optionally be drilled out. If the teeth are cut out, the openings must be backed by material so that the face is not seen.
*Colours of markings may range from chrome to silver, brushed aluminum to light gray to dark gray (gun metal), but must be consistent - pick a colour and stick with it| }}

{{CRLtemplate-nolevels|File:Blankwhite.gif|Hoses|
*Black Ribbed Hoses with a 1.25" diameter and 18" to 21" in length from the helmet hose port to connect to the chestbox upper hose ports.||}}

{{CRLgeneric-balaclava}}



{{CRLblackflightsuit}}

{{CRLcommpad}}

{{CRLtemplate-nolevels|File:TI_armor.jpg|Armour|
*Should consist of the front and back armor as shown, with two shoulder straps anchored by an octagon of plastic on each end. Black Nylon webbing or elastic should also be allowed to aid in the snug fit of the armor. The shoulder straps should not be load bearing. Being plastic they can crack.||}}

{{CRLtemplate-nolevels|File:TI_ANH_chest_box.jpg|Chestbox|
*The chestbox is required to have the same configurations as seen in these photos.
*The box has 4 1" square x 1/8th" thick detail pieces. There are several canon configurations that are acceptable:
**2 white, 2 blue
**1 Red, 1 White, 2 Blue
** 1 Gray, 1 White, 2 Blue.
* The rockers are always 2 Gray with dots or lamps in their bottom (LEDs or Lights are optional but should be approved.)||}}

{{CRLofficerbelt}}

{{CRLblack-gauntlet-gloves}}

{{CRLgeneric-black-boots}}

{{CRLfooter|JRS_CRL|T}}

Costuming:TI TIE Pilot ANH

2012-06-08T19:04:47Z

Stormtrooperguy:

{{CRLheader|TIE Pilot, A New Hope|File:TI_pilot_anh.jpg|TI 6854|Ed Eliason}}



{{CRLdetinfo| 1102 |TIE Pilot, ANH|TI|Star Wars Episode 4|
TIE pilots served in the Imperial Navy by piloting the various TIE series starfighters.}}

{{CRLjrslevels}}

{{CRLgmlapproval}}



{{CRLrequirements}}

{{CRLtemplate-nolevels|File:TI_rotj_helmet.jpg|Helmet|
*See the [[Costuming:TI_TIE_Pilot_Helmet-detail|TIE Helmet Detail page]] for more views and information about canon paint schemes.
*Helmet may have flat or bubbled lenses in Dark Gray or Dark Green.
*The helmet must also have imperial disks (greeblies) on the ear wells.
*Two 2.75" diameter Imperial Emblems in either white or silver should be on the crest of the helmet as seen in the diagrams below.
*The frown between the teeth may optionally be drilled out. If the teeth are cut out, the openings must be backed by material so that the face is not seen.
*Colours of markings may range from chrome to silver, brushed aluminum to light gray to dark gray (gun metal), but must be consistent - pick a colour and stick with it| }}

{{CRLtemplate-nolevels|File:Blankwhite.gif|Hoses|
*Black Ribbed Hoses with a 1.25" diameter and 18" to 21" in length from the helmet hose port to connect to the chestbox upper hose ports.||}}

{{CRLgeneric-balaclava}}

{{CRLblackflightsuit}}

{{CRLcommpad}}

{{CRLtemplate-nolevels|File:TI_armor.jpg|Armour|
*Should consist of the front and back armor as shown, with two shoulder straps anchored by an octagon of plastic on each end. Black Nylon webbing or elastic should also be allowed to aid in the snug fit of the armor. The shoulder straps should not be load bearing. Being plastic they can crack.||}}

{{CRLtemplate-nolevels|File:TI_ANH_chest_box.jpg|Chestbox|
*The chestbox is required to have the same configurations as seen in these photos.
*The box has 4 1" square x 1/8th" thick detail pieces. There are several canon configurations that are acceptable:
**2 white, 2 blue
**1 Red, 1 White, 2 Blue
** 1 Gray, 1 White, 2 Blue.
* The rockers are always 2 Gray with dots or lamps in their bottom (LEDs or Lights are optional but should be approved.)||}}

{{CRLofficerbelt}}

{{CRLblack-gauntlet-gloves}}

{{CRLgeneric-black-boots}}

{{CRLfooter|JRS_CRL|T}}

Costuming:TuskenRaiderMaleAttackoftheClones

2012-06-03T02:34:49Z

Stormtrooperguy:

{{CRLheader|Male Tusken Raider|File:Missingprofile.jpg|MODEL NAME|PHOTOGRAPHER NAME}}

{{CRLdetinfo| 1109 |Male Tusken Raider|DZ|Episode II: Attack of the Clones|
Fearsome desert savages inhabiting the rocky Jundland Wastes, Tusken Raiders are the foremost reason Tatooine colonists do not wander far from their isolated communities. Extremely territorial and xenophobic, Tusken Raiders will attack with very little provocation. They show no allegiance to even their native world-mates, as these nomads have attacked Jawa scouting parties on occasion. Covered from head-to-foot in tattered rags and robes, Tusken Raiders -- or Sand People as they are also known -- brandish a deadly bladed club known as a gaderffii. They also carry projectile rifles with which to shoot at passing vehicles. The male of the species tend to be the aggressors..

{{RL_approved}}}}

{{CRLwipgmlapproval}}

{{CRLrequirements}}

{{CRLtemplate-nolevels|File:DZ_tusken_male_aotc_head.jpg| Helmet / Mask|
*A fully wrapped head of similar design matching Episode 2.  
*Cloth wrapping must be used for the main part of the head. The wrapping is tighter and smoother than the ANH version.
*Leather or simulated leather must be used for the face wrapping. No latex masks will be accepted.  
*Must have nine (9) metal or simulated metal detail pieces.  
**2 eye stalks – tapered toward the front with 2 slots cut into the underside of each piece
**4 head spikes - must have slight taper  
**2 Blood spitters (cheek tusks)  
**1 nose piece - must have at least 2 vertical slots  
*Screening or tinted lenses must be used so eyes and mouth are not visible from the outside of mask. | |  }}

{{CRLtemplate-nolevels|File:DZ_tusken_male_aotc_scarf.jpg|Neck Wrapping|
*Sand-colored fabric of similar design matching prequel era movie costume.
*Must hide any skin visible between mask and robe.
*Fabric should show signs of wear and be weathered. | |}}

{{CRLtemplate-nolevels|File:DZ_tusken_male_aotc_robe.jpg|Robe|
* Made of a textured, sand-colored fabric reaching within 2-3 inches of the floor.
* Robe is open in the front, overlapping and secured by the sash/waist bandoliers.
* The robe is worn underneath the bandolier(s).
* Fabric should show signs of wear and be weathered. | |}}

{{CRLtemplate-nolevels|File:DZ_tusken_raider_waist_sash.jpg|Waist Sash|
*6-7” “girth belt” that ties in the back made of similar fabric to the robes.
* Color must be in the sand to brown range.
*No excess should hang from the knotting or attachment.
*Worn under any waist bandolier.
*Fabric should show signs of wear and be weathered. ||}}

{{CRLtemplate-nolevels|File:DZ_tusken_male_aotc_bandolier.jpg|Bandoleers|
* At least one (1) must be worn across the chest or around the  waist.
* Many of the AotC tuskens wore custom leather bandoliers not based on past military equipment.
** May also be Swedish, British 1903 pattern, or cloth of WW2  era design, or similar recreations matching the style in the movie.
* Maximum of three – 2 crossing the chest in an “X” formation with a third over your waist.||}}

{{CRLtemplate-nolevels|File:DZ_tusken_gloves.jpg| Hands and Arms|
*Sand-colored cloth or leather gloves with Cloth wrappings start at the palm and continue up the arm until concealed within robes.
*Wraps must conceal all skin on the arms.
*Fabric should show signs of wear and be weathered. | |}}

{{CRLtemplate-nolevels|File:DZ_tusken_boots.jpg|Boots|
*Boots or shoes, covered with cloth wrappings.
*Wrappings must continue up the leg until concealed within the robes.
*Wraps must conceal all skin on the legs.
*Fabric should show signs of wear and be weathered. | | }}

{{CRLaccessories}}

{{CRLtemplate-nolevels|File:DZ_tusken_rader_gaffi.jpg|Gaderffii (gaffi stick)| | | }}

{{CRLtemplate-nolevels|File:Blankwhite.gif|Rifle| | | }}

{{CRLtemplate-nolevels|File:DZ-tusken_undershirt.jpg|Undershirt|
* Sand colored turtleneck helps ensure that no skin shows, and gives the wearer something to pin arm wraps to.|| }}

{{CRLtemplate-nolevels|File:DZ_tusken_pants.jpg|Trousers|
* Sand colored trousers help ensure that no leg shows.|| }}

{{CRLfooter|Krayt_Clan_CRL|D}}

Template:CRL tx stormtrooper thighs

2012-06-01T01:16:52Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_thighs.jpeg|Thigh Armor|
* The thigh armor may open and firmly close in the back allowing the two halves to appear sealed when viewed by spectators. The ammo belt is installed on the bottom of the right thigh.||}}

Template:CRL tx stormtrooper shoulderstraps

2012-06-01T01:16:46Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_shoulderstraps.jpeg|Shoulder Straps|
* These must be securely mounted in front and may free float in back.||}}

Template:CRL tx stormtrooper shoulderbells

2012-06-01T01:16:42Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_shoulderbells.jpeg|Shoulder Bells|
*One on each shoulder. The shoulder bells are considered effectively symmetrical; they may worn interchangeably on the left and right shoulders.||}}

Template:CRL tx stormtrooper shins

2012-06-01T01:16:37Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_shins.jpeg|Shin Armor|
* The shin armor is able to open and firmly close in the back allowing the two halves to appear sealed when viewed by spectators. The trapezoid knee plate is affixed to the top of the left shin.||}}

Template:CRL tx stormtrooper kidney

2012-06-01T01:16:32Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_kidney.jpeg|Kidney Plate|
*It is allowable to have a single kidney/butt plate for 501st requirements. If a separate kidney plate is used, it should line up with the ab plate, with the top of the kidney plate being flush to or under the back plate.||}}

Template:CRL tx stormtrooper holster

2012-06-01T01:16:28Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_holster.jpeg|Holster|
*Made of black leather or leather-like material.
*Holster must be worn on the left and be may be attached to the belt from behind with rivets or with loops covering the outside of the belt.||}}

Template:CRL tx stormtrooper helmet

2012-06-01T01:16:23Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_helmet.jpeg|Helmet|
* Lenses must be sufficiently dark enough to obscure the costumer's eyes. They may be flat or bubbled. Acceptable colors are: black, smoke, dark green, or silver.
* The body of the "ears" may be black or gray. The bars have three or four bumps and may be left the same color as the body or painted black.
* The frown must have either 6 or 8 teeth cut out and any coloring must not leave the indented area. Acceptable colors are: black, gray or silver. If there are spaces between the teeth the wearer's face must not be seen
* The tube stripes are black in color and may number between 9 and 15 per side with the curve bends extending backwards. These may be hand painted or decals. There does not need to be the same number per side.
* Vocoder (vertically ribbed chin detail) may be black or silver.
* The aerators (cylinders on either side of the vocoder) are black, and screening maybe silver or black.
* Traps (trapezoids on dome of helmet) and tears (area beneath the corners of eye lenses) may be: hand painted, decals. Acceptable colors are: black or gray. Rear traps and tears may have vertical black lines. ||}}

Template:CRL tx stormtrooper handplates

2012-06-01T01:16:17Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_handplates.jpeg|Handplates|
* Roughly pentagonal in shape, the hand plates are mounted securely over the back of the glove. As an alternative to plastic, these may be made out of latex or latex-like material but must remain glossy.||}}

Template:CRL tx stormtrooper forearms

2012-06-01T01:16:12Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_forearms.jpeg|Forearms|
* Forearms must appear to be fully sealed and enclosed.||}}

Template:CRL tx stormtrooper detonator

2012-06-01T01:16:07Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_detonator.jpeg|Thermal Detonator|
* (a.k.a. O2 canister) attaches to the back of the belt. This is an all black cylinder 2 to 2.5" in diameter with black end caps and a black control panel pad, with controls closest to the right end cap.||}}

Template:CRL tx stormtrooper chest

2012-06-01T01:16:02Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_chest.jpeg|Chest Plate|
*Chest plate overlaps the abdominal plate.||}}

Template:CRL tx stormtrooper butt

2012-06-01T01:15:57Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_butt.jpeg|Butt Plate|
* It is allowable to have a single kidney/butt plate for 501st requirements. If a separate butt plate is used, it should line up below the bottom of the belt with with the ab plate, with minimal gap between it and the kidney plate.||}}

Template:CRL tx stormtrooper boots

2012-06-01T01:15:52Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_boots.jpeg|Boots|
* Black leather or leather-like, above ankle height, with a flat sole, and small U-shaped elastic sections on both sides of the ankle with no buckles or laces. Jodphur-type boots or an equivalent style. All stitching must be black, and unnecessary or decorative stitching must not be present. Elvis / Mariachi boots are not acceptable.
* White, or other color boots may be painted black so long as the boots are maintained to remain the proper color.||}}

Template:CRL tx stormtrooper biceps

2012-06-01T01:15:46Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_biceps.jpeg|Biceps|
* Biceps are fully closed.||}}

Template:CRL tx stormtrooper belt

2012-06-01T01:15:41Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_belt.jpeg|Belt|
* Belt face is made of plastic (ammo belt). It is comprised of 6 rectangular boxes, with three square buttons, one centered in the middle and one on each end.
* Belt proper may be made from glossy black ABS or a similar shiny material and must be 3 to 3.5" wide. Black canvas or similar heavy material may also be used.
* The drop boxes dangle from the sides of the plastic belt face via black straps and are aligned under the plastic tabs of the ammo belt.||}}

Template:CRL tx stormtrooper back

2012-06-01T01:15:36Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_back.jpeg|Back Plate|
* Back plate contains a "O II" design with little or no overlap of the kidney plate.||}}

Template:CRL tx stormtrooper ab

2012-06-01T01:15:29Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TX_shadowstorm_ab.jpeg|Abdominal Plate|
*The ab plate has a button area that has 9 gloss black buttons of approximately 7/16" in diameter.||}}

Costuming:TX shadow stormtrooper

2012-06-01T01:14:12Z

Stormtrooperguy:

{{CRLheader|Shadow Stormtrooper|File:TX_shadowstorm_full.jpeg |TX-5575 |Lisa Basham }}

{{CRLdetinfo| 1113 |Shadow Stormtrooper|TX|Gambler's World; Crimson Empire; Luke Skywalker and the Shadows of Mindor| }}

{{CRLspecopslevels}}

{{CRLgmlapproval}}

{{CRLrequirements}}

{{CRL_tx_stormtrooper_helmet}}

{{CRL_generic_tk_neckseal}}

{{CRL_tx_stormtrooper_shoulderstraps}}

{{CRL_tx_stormtrooper_shoulderbells}}

{{CRL_tx_stormtrooper_biceps}}

{{CRL_tx_stormtrooper_forearms}}

{{CRL_tx_stormtrooper_handplates}}

{{CRL_generic_tk_gloves}}

{{CRL_tx_stormtrooper_chest}}

{{CRL_tx_stormtrooper_back}}

{{CRLtemplate-nolevels|File:TK_anh_stunt_undersuit.jpeg|Under Suit|
* Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos. | | }}

{{CRL_tx_stormtrooper_ab}}

{{CRL_tx_stormtrooper_kidney}}

{{CRL_tx_stormtrooper_butt}}

{{CRL_tx_stormtrooper_belt}}

{{CRL_tx_stormtrooper_detonator}}

{{CRL_tx_stormtrooper_thighs}}

{{CRL_tx_stormtrooper_shins}}

{{CRL_tx_stormtrooper_boots}}

{{CRL_tx_stormtrooper_holster}}

{{CRLaccessories}}

{{CRLblackpauldron}}

{{CRLgeneric-e11}}

{{CRL-dlt19}}

{{CRLfooter|Specops_CRL|T}}

Costuming:Jawa

2012-05-29T17:10:37Z

Stormtrooperguy:

{{CRLheader|Jawa|File:Missingprofile.jpg|None|None|}}

{{CRLdetinfo| 1109 |Jawa|DZ|Star Wars Films and EU|
Jawas were passionate scavengers, seeking out technology for sale or trade in the deep deserts in their huge sandcrawler transports. They had a reputation for swindling, as they had a penchant for selling old equipment such as outdated faulty droids to moisture farmers. However, they were extremely passive beings, and hardly put up any resistance to colonists of their planet unlike the other natives the Sand people, instead seeing foreigners as an excellent business opportunity.

{{RL_approved}}}}

{{CRLwipgmlapproval}}

{{CRLrequirements}}

{{CRLtemplate-nolevels|File:Blankwhite.gif| Helmet / Mask|
*Mask: The mask is basically a base upon which to mount two glowing eyes. Only the illuminated eyes should be visible, making it ideal to wear the mask under the shroud. The glowing eyes should glow, not project, so do not use mini-flashlights or other reflector beams that shoot light out. A simple incandescent lamp or non-directional LED is ideal. The diameter of the light should not exceed 3/4” (5cm).
*Face Shroud: The face shroud should be a breathable, black covering that hides the head of the costumer, but allows for necessary vision and air circulation (such as a tight mesh).
*The hood should be made of material that matches the robes, preferably the appropriate herringbone Ralph Lauren blanket, Monk’s cloth, or similar textured material, and should be a rusty brown color. The hood should have a wire reinforcement sewn into the face opening to keep the hood open for visibility and look. A solid core, coated wire of 12 or 14 gauge metal is recommended. The flaps at the bottom of the face opening should overlap as seen in the films. | |  }}

{{CRLtemplate|File:Blankwhite.gif|Robe(s)|
*The robe should be of the appropriate herringbone Ralph Lauren blanket, Monk’s cloth, or similar textured material, and should be a rusty brown color. The openings of the sleeves and robe bottom should be flared, unhemmed and frayed. Cottons are recommended for cost, look, feel, breath-ability, and ease of care. | |  }}

{{CRLfooter|Krayt_Clan_CRL|D}}

Costuming:CT - Shock Trooper

2012-05-22T17:00:27Z

Stormtrooperguy:

{{CRLheader|Clone Shock Trooper|File:Missingprofile.jpg|MODEL NAME|PHOTOGRAPHER NAME}}

{{CRLdetinfo| 1111 |Clone Shock Trooper|CT|Episode III: Revenge of the Sith|
Clone shock troopers were specialist clone troopers introduced during Clone Wars to increase security and order on Coruscant in the form of the Coruscant Guard. Though a military force, they served mostly in a police capacity or as body guards for diplomats and other dignitaries including the Supreme Chancellor. Throughout the Clone Wars, they were distinguished by red markings all over their helmet and body armor. This was carried into the Imperial era where Coruscant Guard became well known by its all crimson body armor.}}

{{CRLctnlevels}}

{{CRLwipgmlapproval}}

{{CRLrequirements}}

{{CRLtemplate|File:Blankwhite.gif| Helmet|
*Episode 3 style Clone Helmet - Fanmade bucket. Some "name brand" helmets may be unacceptable.
*Visor - Black Visor.
*Helmet mohawk on dome is painted red.
*inside cheeks and rear head indents are painted red.
*The nose from tube to tube under the frown is painted red.
*There are 12 vertical "Kill" stripes over the brow trim that that painted red and evenly spaced.
*The airrator tubes on the fave have 8 horizontal red stripes evenly spaced.
*Vertical kill stripes on each side of helmet cheeks that are dark blue in color.
*Helmet frown is charcoal gray in color. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
*Primer gray stripe around back of dome.
*Ear caps are painted a dark gray.|
*Helmet has the appearance of a neck ring. |
*Helmet has an enclosed complete neck ring that seals the helmet to the neck. }}

{{CRLtemplate|File:Blankwhite.gif|Neck Seal|
*Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.| |}}

{{CRLtemplate|File:TK_anh_stunt_undersuit.jpeg|Under Suit|
* Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.| | }}

{{CRLtemplate|File:Blankwhite.gif|Shoulder Bells|
*Armor should be painted red.
*Shoulders should be tear drop in shape with all rounded edges. | |
*Shoulder bells should not be symmetrical. The Shoulder bells should slightly curve back at the bottom of the shoulder. }}

{{CRLtemplate|File:Blankwhite.gif|Upper Arm Armor|
*Armor should be painted matte or satin white.
**Two 3/4 inch red stripes spaced approximately half an inch apart must encircle the lower part of the upper arm.
*Should have a dimple on the lower area of the back of the arm. The outside of the bicep should have a hard line edge at the front that turns in. The inside of the upper arm should be rounded.
*Armor should be seamless. No visible traces of how the armor was assembled should be shown.| | }}

{{CRLtemplate|File:Blankwhite.gif|Elbow Armor|
*Armor should be painted matte or satin white
*There are two elbows. On each elbow on the outside of the body near the connection point of the elbow strap there should be detail slots that look like an equal symbol on both elbow pieces.
* Both elbows have strapping. The straps should have a raised detail line at the top and bottom of the strap.| |
*Elbows should be mirror images of each other with a notched area on the outside of the elbow above the detail marks.}}

{{CRLtemplate|File:Blankwhite.gif|Forearm Armor|
*Armor should be painted matte or satin white.
*Both left and right forearms should be mirror images of each other.
*Right forearm should have a compad that has 8 small buttons,1 Large main button, and 1 slightly smaller rectanular button.
*Forearm tops should have a flattened triangular area that have a ridge that comes to a point at the top of the forearm.
*Armor should be seamless. No visible traces of how the armor was assembled should be shown. |
*Compad has detail antenna on its left. |
*Instead of a hard edge the top of the forearm has a bone ridge.}}

{{CRLtemplate|File:Blankwhite.gif|Hand Plates|
*Armor should be painted matte or satin white
*Hand plates are mirror images of each other.
*Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand. | | }}

{{CRLtemplate|File:Blankwhite.gif|Gloves|
*Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. | | }}

{{CRLtemplate|File:Blankwhite.gif|Chest Armor|
*Armor should be painted matte or satin white.
**Top of the chest must be painted red. The red stops at all the return edges.
*Two detail slots on right breast.
*Chest and back plate should match together at the sides with no gap, just a seam line.
*Shoulder straps should be placed underneath the chest to connect to the back. |
|
* Shoulder straps should be slotted into the chest into the detail ridges of the top connection points. }}

{{CRLtemplate|File:Blankwhite.gif|Back Armor|
*Armor should be painted matte or satin white.
*Rear tank has detailed area that contains 4 circles. Under the circles at the left side of the back there should be two parallel lines and the the right of the back there should a be a squared detail.
*Chest and back plate should match together at the sides with no gap, just a seam line.
*Shoulder straps should be placed underneath the chest to connect to the back. |
|
*Shoulder straps should be slotted into the Back into the detail ridges of the top connection points.
*Highly detailed resin insert should replace softer details. }}

{{CRLtemplate|File:Blankwhite.gif|Ab Armor|
*Armor should be painted matte or satin white.
*Four 1/4" diameter holes per side on indents of ab plate, eight holes total.
*Ab section should wrap around the wearers body and be sealed at the sides or at the back.
*Ab section should be completely contained under the chest and back armor. |
|
* Ab section should be seamless at the sides and close in the back. A detail plate should cover the seam line and hide all work.}}

{{CRLtemplate|File:Blankwhite.gif|Cod and Posterior Armor|
*Armor should be painted matte or satin white.
*Cod and Posterior armor should connect at the hips. |
*Hips should be connected together via a snap or screw. |
*Hips should be connected via a snap with the correct detailed shape of the armor at the connection point. }}

{{CRLtemplate|File:Blankwhite.gif|Belt|
*Armor should be painted red.
*Ammo Belt with boxes and detonator.
*Detonator is centered on the back of belt.
*8 boxes total, 4 on each side of abdomen and attached to the belt. |
|
*Belt Boxes should be notched and fitted flush with the details of the belt.
*Left Rear belt box should have two square buttons in the top left corner and and equal symbol detail at the bottom right.
*Right Rear belt box should have a bar with two small cylinders centered with and equal symbol detail on the bottom left.
*From the rear two belt boxes the belt should have a ribbed detailed appearance.}}

{{CRLtemplate|File:Blankwhite.gif|Thigh Armor|
*Armor should be painted matte or satin white.
**A 1 inch wide red stripe should run the length of the outside thigh just forward of center. From that vertical line two 2 inch red strips spaced on inch apart should end at the front thigh ridge.
* Front of thigh armor should have a flat triangular area near the knee. From the top of the triangle a ridge line should go up the front of the thigh to the top.
*Rear of the thigh should have an indention.
*Armor should be seamless. No visible traces of how the armor was assembled should be shown. |
|
* Outside of lower portion of the thighs should come to a point and inner lower end should be rounded. }}

{{CRLtemplate|File:Blankwhite.gif|Knee Armor|
*Armor should be painted matte or satin white.
*Knees should wrap around the front of the leg. From top center a raised detail line should be present.
*Knees should be strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.|
|
*Center strap should be primer gray.
*Connection between the knee and the strapping should have a detail clip.}}

{{CRLtemplate|File:Blankwhite.gif|Lower Leg Armor|
*Armor should be painted red.
*Lower Legs are mirror images of each other. The front of the armor should have a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
*Back of the lower legs should have an indentation just under the calf the follow down to the ankle.
*Calf can have an access area on the inside of the leg. The outside of the calf should be closed. |
|
*Calves should be seamless and have a trap door access through the indent in the rear of the lower leg.}}

{{CRLtemplate|File:Blankwhite.gif|Boots|
*Red, ankle high or tall enough to cover the ankle and eliminate any black under suit visible at the ankle area in armor. Boots must be lace-less and have flat soles. The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap. There should be no markings or labels from the shoe makers. Boot soles should be primer gray. | | }}

{{CRLaccessories}}

{{CRLdc15s-realistic}}

{{CRLdc15a-realistic}}

{{CRLfooter|CTN_CRL|C}}

Costuming:CC - CW-Wolffe - Season 4

2012-05-14T17:12:00Z

Stormtrooperguy:

{{CRLheader|Clone Commander Wolffe (Season 4)|File:S4_wolffe_main.jpg|CC0812|Kevin Weir}}

{{CRLdetinfo| 1111 |Clone Commander Wolffe (Season 4)|CC|The Clone Wars|Commander Wolffe appears in multiple episodes, and has the most frequently changing armor of any of the clones. This CRL refers to his Season 4 Armor.
}}

{{CRLctnlevels}}

{{CRLwiplmoapproval}}

{{CRLfooter|CTN_CRL|C}}

{{CRLtemplate|File:S4_wolffe_helmet.jpg|Helmet|
*Wolffe specific Clone Wars style helmet ( modified movie Neyo not acceptable).
*Helmet painted matte blue-gray with white wolf motif on each side.
*Weathering should be shades of grey.
*Red triangle above the brow with 3 yellow 'kill' stripes on either side.
*RF stalk mounted on the outside of the ear, with a gray RF topper|| }}

{{CRL-TC_animated_neckseal}}

{{CRL-generic-undersuit}}

{{CRLtemplate|File:S4_wolffe_bells.jpg|Shoulder Bells|
* Left shoulder bell painted matte blue-gray with white motif ( as shown in picture ) and antenna array.
* Right shoulder bell painted matte blue-gray with wolfs head motif as shown.|
* Shoulder bells must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_biceps.jpg|Upper Arm Armor|
*Armor must be painted matte or satin white. Weathering should be shades of grey.
*Blue-gray markings should be painted as shown.
*Biceps should be seamless.|
*Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_forearms.jpg|Forearm Armor|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Blue-gray markings must be painted as shown.
*Right forearm must have a compad that has 6 raised buttons, with a larger rectangle above them. A smaller raised section is closest to the elbow.
*Armor must be seamless on the outside edge. Due to the shape of the armor, a butted seam is acceptable on the inside if required.
*Elbow plate is integrated into the forearm.|
* Armor must be seamless. No visible traces of how the armor was assembled should be shown.
* Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_hands.jpg|Hand Plates|
* Armor must be matte or satin blue-gray. If weathered, the weathering should be white, rubbed through the gray or applied topically. |
* Hand plates must be weathered. | }}

{{CRL-generic_black_gloves}}

{{CRLtemplate|File:S4_wolffe_chest.jpg|Chest Armor|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Top part of the chest has a curved blue-gray section as shown.
*Lower portion of the chest has a squared notch for the abdomen armor to fit into.
*Chest and back plate must match together at the sides and shoulders with no gap. Butted seam lines are permitted if required.
*Shoulder straps fit into the tops of the chest and back |
*Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_back.jpg|Back Armor|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Top section of the backplate has blue-gray section extending down to the detail plate - as shown.
*Backplate has a detail plate, similar to movie clonetroopers, as shown.
*Chest and back plate must match together at the sides and shoulders with no gap. Butted seam lines are permitted if required.
*Shoulder straps fit into the tops of the chest and back. |
*Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_abs.jpg|Ab Armor|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Top edge of the armour is squared off to match the chest armor.
*The ab armour protrudes out in the middle to batter match the chest.
*The ab armour joins at the rear and the join is covered by a plate.
. |
*Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_cod.jpg|Codpiece and belt front|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Belt is approx 3" tall and divided into segments. The front segments have a key/slot detail.
*Belt boxes are mounted forwards, leaving 2 segments clear at the front.
*Cod and Posterior armor should connect at the hips. |
*Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_but.jpg|Posterior Armor, belt rear and detonator|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Belt is approx 3" tall and divided into segments.
*Cod and Posterior armor should connect at the hips. Butted seams are permitted at this connection if required.
*Detonator is centered on the back of belt with no control buttons. The detonator has 2 lines set in approx 1/2" - 5/8" from the edges. Lines may be recessed or painted on. |
*Armor must be weathered. || }}

{{CRLtemplate|File:S4_wolffe_thighs.jpg|Thigh Armor|
* Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Front of thigh armor should have a flat triangular area near the knee with a notch cut out for the knee armor. From the top of the triangle a ridge line should go up the front of the thigh to the top.
*The upper outer edge should have an angled section.
*The rear of the thigh should have an indentation.
* Armor must be seamless. No visible traces of how the armor was assembled should be shown. |
* Armor must be weathered.||}}

{{CRLtemplate|File:S4_wolffe_kama.jpg|Kama|
* The kama must be made of black suede-ette material, or heavy canvas.
*The kama should be 2 seperate sections with rounded corners.
*The edge of the kama should be trimmed in gray. ||}}

{{CRLtemplate|File:S4_wolffe_holsters.jpg|Holsters|
* Holsters should be painted matte or satin white. If weathered the weathering should eb shades of gray.
*Holsters may connect to the belt via straps or directly to the kama with no visible attachment. ||}}

{{CRLtemplate|File:S4_wolffe_shins.jpg|Shin Armor|
* Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Lower shins have blue-gray jagged paint scheme as shown.
*Knee armor is integrated with the lower leg.
*The rear of the shin should have an indentation.
* Outer seam of the shin must be seamless. A clamshell opening on the inner seam is acceptable. |
* Armor must be weathered.|}}

{{CRLtemplate|File:S4_wolffe_shoes.jpg|Boots|
* The shoes should be blue-gray in colour.
*The edge of the sole should be flat and have notches cut into it.
*A detail strap should be placed over the top of each boot. ||}}

{{CRLdc17pistol-animated}}

Costuming:CC - CW-Wolffe - Season 4

2012-05-14T17:10:46Z

Stormtrooperguy:

{{CRLheader|Clone Commander Wolffe (Season 4)|File:S4_wolffe_main.jpg|CC0812|Kevin Weir}}

{{CRLdetinfo| 1111 |Clone Commander Wolffe (Season 4)|CC|The Clone Wars|Commander Wolffe appears in multiple episodes, and has the most frequently changing armor of any of the clones. This CRL refers to his Season 4 Armor.
}}

{{CRLctnlevels}}

{{CRLwiplmoapproval}}

{{CRLfooter|CTN_CRL|C}}

{{CRLtemplate|File:S4_wolffe_helmet.jpg|Helmet|
*Wolffe specific Clone Wars style helmet ( modified movie Neyo not acceptable).
*Helmet painted matte blue-gray with white wolf motif on each side.
*Weathering should be shades of grey.
*Red triangle above the brow with 3 yellow 'kill' stripes on either side.
*RF stalk mounted on the outside of the ear, with a gray RF topper|| }}

{{CRL-TC_animated_neckseal}}

{{CRL-generic-undersuit}}

{{CRLtemplate|File:S4_wolffe_bells.jpg|Shoulder Bells|
* Left shoulder bell painted matte blue-gray with white motif ( as shown in picture ) and antenna array.
* Right shoulder bell painted matte blue-gray with wolfs head motif as shown.|
* Shoulder bells must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_biceps.jpg|Upper Arm Armor|
*Armor must be painted matte or satin white. Weathering should be shades of grey.
*Blue-gray markings should be painted as shown.
*Biceps should be seamless.|
*Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_forearms.jpg|Forearm Armor|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Blue-gray markings must be painted as shown.
*Right forearm must have a compad that has 6 raised buttons, with a larger rectangle above them. A smaller raised section is closest to the elbow.
*Armor must be seamless on the outside edge. Due to the shape of the armor, a butted seam is acceptable on the inside if required.
*Elbow plate is integrated into the forearm.|
* Armor must be seamless. No visible traces of how the armor was assembled should be shown.
* Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_hands.jpg|Hand Plates|
* Armor must be matte or satin blue-gray. If weathered, the weathering should be white, rubbed through the gray or applied topically. |
* Hand plates must be weathered. | }}

{{CRL-generic_black_gloves}}

{{CRLtemplate|File:S4_wolffe_chest.jpg|Chest Armor|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Top part of the chest has a curved blue-gray section as shown.
*Lower portion of the chest has a squared notch for the abdomen armor to fit into.
*Chest and back plate must match together at the sides and shoulders with no gap. Butted seam lines are permitted if required.
*Shoulder straps fit into the tops of the chest and back |
*Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_back.jpg|Back Armor|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Top section of the backplate has blue-gray section extending down to the detail plate - as shown.
*Backplate has a detail plate, similar to movie clonetroopers, as shown.
*Chest and back plate must match together at the sides and shoulders with no gap. Butted seam lines are permitted if required.
*Shoulder straps fit into the tops of the chest and back. |
*Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_abs.jpg|Ab Armor|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Top edge of the armour is squared off to match the chest armor.
*The ab armour protrudes out in the middle to batter match the chest.
*The ab armour joins at the rear and the join is covered by a plate.
. |
*Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_cod.jpg|Codpiece and belt front|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Belt is approx 3" tall and divided into segments. The front segments have a key/slot detail.
*Belt boxes are mounted forwards, leaving 2 segments clear at the front.
*Cod and Posterior armor should connect at the hips. |
*Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_but.jpg|Posterior Armor, belt rear and detonator
|
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Belt is approx 3" tall and divided into segments.
*Cod and Posterior armor should connect at the hips. Butted seams are permitted at this connection if required.
*Detonator is centered on the back of belt with no control buttons. The detonator has 2 lines set in approx 1/2" - 5/8" from the edges. Lines may be recessed or painted on. |
*Armor must be weathered. | }}

{{CRLtemplate|File:S4_wolffe_thighs.jpg|Thigh Armor|
* Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Front of thigh armor should have a flat triangular area near the knee with a notch cut out for the knee armor. From the top of the triangle a ridge line should go up the front of the thigh to the top.
*The upper outer edge should have an angled section.
*The rear of the thigh should have an indentation.
* Armor must be seamless. No visible traces of how the armor was assembled should be shown. |
* Armor must be weathered.|}}

{{CRLtemplate|File:S4_wolffe_kama.jpg|Kama|
* The kama must be made of black suede-ette material, or heavy canvas.
*The kama should be 2 seperate sections with rounded corners.
*The edge of the kama should be trimmed in gray. |}}

{{CRLtemplate|File:S4_wolffe_holsters.jpg|Holsters|
* Holsters should be painted matte or satin white. If weathered the weathering should eb shades of gray.
*Holsters may connect to the belt via straps or directly to the kama with no visible attachment. |}}

{{CRLtemplate|File:S4_wolffe_shins.jpg|Shin Armor|
* Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
* Lower shins have blue-gray jagged paint scheme as shown.
*Knee armor is integrated with the lower leg.
*The rear of the shin should have an indentation.
* Outer seam of the shin must be seamless. A clamshell opening on the inner seam is acceptable. |
* Armor must be weathered.|}}

{{CRLtemplate|File:S4_wolffe_shoes.jpg|Boots|
* The shoes should be blue-gray in colour.
*The edge of the sole should be flat and have notches cut into it.
*A detail strap should be placed over the top of each boot. |}}

{{CRLdc17pistol-animated}}

Template:CRL-generic-undersuit

2012-05-14T14:34:09Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:TK_anh_stunt_undersuit.jpeg|Under Suit|
* Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.| | }}

Template:CRLdc15a-animated

2012-05-14T14:33:44Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:Blankwhite.gif|DC-15A Blaster Rifle (animated style)| | | }}

Template:CRLdc15s-animated

2012-05-14T14:33:37Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:CRLdc15s-animated.jpg|DC-15S Blaster Carbine (animated style)| | | }}

Template:CRLdc17pistol-animated

2012-05-14T14:33:28Z

Stormtrooperguy:

{{CRLtemplate-nolevels|File:CW_animated_dc17_pistol.jpg|DC-17 Hand Blaster (animated style)| | | }}

Costuming:CC CommanderDeviss

2012-05-11T16:01:43Z

Stormtrooperguy: Protected "Costuming:CC CommanderDeviss" ([edit=sysop] (indefinite) [move=sysop] (indefinite))

{{CRLheader|Clone Commander Deviss|File:Deviss.jpg|Philip Bareither CC 8367|Brooke Barnes}}

{{CRLdetinfo| 1111 |Clone Commander Deviss|CC|Episode III: Revenge of the Sith|
CT- 6210, also known as Deviss, was a clone trooper captain who led K Company, a unit within Clone Commander Bly's 327th Star Corps. Deviss served in the first battle of the Clone Wars on the Outer Rim planet Geonosis. During the battle, Deviss risked his life to protect two injured soldiers from Confederate spider droids and received a medal after being rescued from behind enemy lines by Republic troops. He went on to fight in the Battle of Altyr V, after which he was promoted to commander for his actions. Deviss was dispatched to support Jedi General Nem Bees on Orto. During a battle on the planet, the Commander received Order 66 and personally shot down Bees on the front lines.
{{RL_approved}}}}

{{CRLctnlevels}}

{{CRLgmlapproval}}

{{CRLrequirements}}

{{CRLtemplate|File:Deviss Helmet.jpg | Helmet|
*Episode 3 style Clone Helmet - Fanmade bucket. Some "name brand" helmets may be unacceptable.
*Visor - Black Visor.
*Helmet mohawk on dome.
*Vertical kill stripes on each side of helmet cheeks that are dark blue in color.
*Helmet frown is charcoal grey in color. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
*Primer grey stripe around back of dome.
*Ear caps are painted a dark grey.
**There is a red stripe down the center of the helmet that ends at the nose of the helmet and squares off at the rear of the helmet.
*Binoc set mounted to the helmet.|
*Helmet has the appearance of a neck ring. |
*Helmet has an enclosed complete neck ring that seals the helmet to the neck.
*Binoc set mounted to the helmet and the binocs can move up and down. }}

{{CRL-realistic-clone-neckseal}}

{{CRL-generic-undersuit}}

{{CRLtemplate|File:Deviss Shoulders.jpg|Shoulder Bells|
*Armor should be painted matte or satin white.
**Red command stripe. Front part of the stripe is painted like any other command stripe. The rear part of the stripe should be placed in the center of the bell. This is a forward facing stripe.
*Shoulders should be tear drop in shape with all rounded edges. | |
*Shoulder bells should not be symmetrical. The Shoulder bells should slightly curve back at the bottom of the shoulder. }}

{{CRLtemplate|File:Deviss Bicep.jpg|Upper Arm Armor|
*Armor should be painted matte or satin white.
**Red stripe starts on the hard outside edge of the bicep and goes to the middle of the outside bicep. It is not the same as the EII command stripes.
*3 smaller white ammo boxes are attached to the right bicep on a brown strap.
*Should have a dimple on the lower area of the back of the arm. The outside of the bicep should have a hard line edge at the front that turns in. The inside of the upper arm should be rounded. | |
*Armor should be seamless. No visible traces of how the armor was assembled should be shown.}}

{{CRLtemplate|File:327th elbow armor.jpg |Elbow Armor|
*Armor should be painted matte or satin white.
*There are two elbows. On each elbow on the outside of the body near the connection point of the elbow strap there should be detail slots that look like an equal symbol on both elbow pieces.
* Both elbows have strapping. The straps should have a raised detail line at the top and bottom of the strap.| |
*Elbows should be mirror images of each other with a notched area on the outside of the elbow above the detail marks.}}

{{CRLtemplate|File:Deviss fore arms.jpg |Forearm Armor|
*Armor should be painted matte or satin white.
**Two inch Red stripe on the top part of the forearm. On the right arm it would cover over the compad. The com pad should be left white. This design should be matched on the left forearm. Acceptable options for the left arm would be to either add a second compad, in paint, leave an outline of a compad, or leave just the stripe.
*Both left and right forearms should be mirror images of each other.
*Right forearm should have a compad that has 8 small buttons,1 Large main button, and 1 slightly smaller rectangular button.
*Forearm tops should have a flattened triangular area that have a ridge that comes to a point at the top of the forearm. | |
*Compad has detail antenna on its left.
*A second compad on the left forearm or a painted outline of a compad on the left forearm is acceptable
*Instead of a hard edge the top of the forearm has a bone ridge.
*Armor should be seamless. No visible traces of how the armor was assembled should be shown.}}

{{CRLtemplate|File:Deviss Hand Plates.jpg|Hand Plates|
*Armor should be painted matte or satin white.
**2 inch red stripe running center of the hand plate.
*Hand plates are mirror images of each other.
*Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand. | | }}

{{CRL-generic_black_gloves}}

{{CRLtemplate|File:Deviss Pauldron.jpg|Command Pauldron|
*Pauldron should be Episode III style. The mantle over the left shoulder should be colored in the command red. Right shoulder mantle should be all black. As well, the paneling on the remainder of the pauldron should be black too. On the right side of the Pauldron, a ammo belt is strung down to the belt. | | }}

{{CRLtemplate|File:327th chest ammo belt.jpg|Chest Ammo Belt|
*3 white, brown and black detailed ammo boxes attached to a Grey strap on right side of chest. | | }}

{{CRLtemplate|File:Deviss Chest Plate.jpg|Chest Armor|
*Armor should be painted matte or satin white.
**Red command stripe approximately 2 inches wide marked center vertical from neck to upper return curve.
*Two detail slots on right breast.
*Chest and back plate should match together at the sides with no gap, just a seam line.
*Shoulder straps should be placed underneath the chest to connect to the back. | |
* Shoulder straps should be slotted into the chest into the detail ridges of the top connection points. }}

{{CRLtemplate|File:327th back armor.jpg|Back Armor|
*Armor should be painted matte or satin white.
*Rear tank has detailed area that contains 4 circles. Under the circles at the left side of the back there should be two parallel lines and the the right of the back there should a be a squared detail.
*Chest and back plate should match together at the sides with no gap, just a seam line.
*Shoulder straps should be placed underneath the chest to connect to the back. | |
*Shoulder straps should be slotted into the Back into the detail ridges of the top connection points.
*Highly detailed resin insert should replace softer details. }}

{{CRLtemplate|File:327th ab armor.jpg|Ab Armor|
*Armor should be painted matte or satin white.
*Four 1/4" diameter holes per side on indents of ab plate, eight holes total.
*Ab section should wrap around the wearers body and be sealed at the sides or at the back.
*Ab section should be completely contained under the chest and back armor. ||
* Ab section should be seamless at the sides and close in the back. A detail plate should cover the seam line and hide all work.}}

{{CRLtemplate|File:327th cod and posterior armor.jpg|Cod and Posterior Armor|
*Armor should be painted matte or satin white.
*Cod and Posterior armor should connect at the hips. | |
*Hips should be connected via a snap with the correct detailed shape of the armor at the connection point. }}

{{CRLtemplate|File:Deviss Belt.jpg |Belt|
*Armor should be painted matte or satin white.
*Ammo Belt with boxes and detonator.
*Detonator is centered on the back of belt.
*8 boxes total, 4 on each side of abdomen and attached to the belt. ||
*Belt Boxes should be notched and fitted flush with the details of the belt.
*Left Rear belt box should have two square buttons in the top left corner and and equal symbol detail at the bottom right.
*Right Rear belt box should have a bar with two small cylinders centered with and equal symbol detail on the bottom left.
*From the rear two belt boxes the belt should have a ribbed detailed appearance.}}

{{CRLtemplate|File:327th kama.jpg|Kama|
*Kama should be kakki or tea brown color. The Kama should not be lined with matching color fabric The rear of the Kama has a split that denotes it as a two piece . Kama should start at the front belt boxes. Kama should be from a heavy material like canvas or a tight weave burlap. Kama should flow to the bottom of your knee armor. There are two straps from the kama that connect to a command buckle centered to the front of the belt. | |}}

{{CRLtemplate|File:327th thigh armor.jpg|Thigh Armor|
*Armor should be painted matte or satin white.
* Front of thigh armor should have a flat triangular area near the knee. From the top of the triangle a ridge line should go up the front of the thigh to the top.
*Rear of the thigh should have an indention. | |
* Outside of lower portion of the thighs should come to a point and inner lower end should be rounded.
*Armor should be seamless. No visible traces of how the armor was assembled should be shown. }}

{{CRLtemplate|File:Deviss Knees.jpg|Knee Armor|
*Armor should be painted matte or satin white.
*Knees should have a red stripe that starts at the top and runs vertically down to the bottom of the knee.
*Knees should wrap around the front of the leg. From top center a raised detail line should be present.
*Knees should be strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.| |
*Center strap should be primer gray.
*Connection between the knee and the strapping should have a detail clip.}}

{{CRLtemplate|File:327th lower leg armor.jpg|Lower Leg Armor|
*Armor should be painted matte or satin white.
*Lower Legs are mirror images of each other. The front of the armor should have a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
*Back of the lower legs should have an indentation just under the calf the follow down to the ankle.
*Calf can have an access area on the inside of the leg. The outside of the calf should be closed. ||
*Calves should be seamless and have a trap door access through the indent in the rear of the lower leg.}}

{{CRLtemplate|File:Deviss Boot.jpg|Boots|
* White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor.
* Boots must be lace-less and have flat soles.
* Boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap. This strap should be painted .
* Across the shoe just infront of detail strap another thin stripe painted red should also be placed on the boot.
* There should be no markings or labels from the shoe makers.
* The shoe soles should be gray. | | }}

{{CRLsubheading|Hip Mounted Accessories:}}

{{CRLtemplate|File:CRL side arms.jpg|Commander Pistols|
*Holster and pistol set. These are hung from the belt and hang at the hip on each side. | | }}

{{CRLaccessories}}

{{CRLdc15s-realistic}}

{{CRLdc15a-realistic}}

{{CRLfooter|CTN_CRL|C}}

Costuming:CC - Commander Fox Phase 2

2012-05-11T16:01:03Z

Stormtrooperguy: Created page with "{{CRLheader|Clone Commander Fox, Phase 2|File:Missingprofile.jpg|MODEL NAME|PHOTOGRAPHER NAME}} {{CRLdetinfo| 1111 |Clone Commander Fox, Phase 2|CC|The Clone Wars Season 4|Comma..."

{{CRLheader|Clone Commander Fox, Phase 2|File:Missingprofile.jpg|MODEL NAME|PHOTOGRAPHER NAME}}

{{CRLdetinfo| 1111 |Clone Commander Fox, Phase 2|CC|The Clone Wars Season 4|Commander Fox appears in the "Deception" episode of Season 4. He is the commander that accepts Hardeen into custody. While never named in the episode, it has been confirmed that it is Fox.
}}

{{CRLctnlevels}}

{{CRLwiplmoapproval}}

{{CRLfooter|CTN_CRL|C}}

Costuming:CC CommanderDeviss

2012-05-11T15:55:40Z

Stormtrooperguy:

Costuming:CC CommanderDeviss

2012-05-11T15:54:14Z

Stormtrooperguy:

{{CRLheader|Clone Commander Deviss|File:Deviss.jpg|Philip Bareither CC 8367|Brooke Barnes}}

{{CRLdetinfo| 1111 |Clone Commander Deviss|CC|Episode III: Revenge of the Sith|
CT- 6210, also known as Deviss, was a clone trooper captain who led K Company, a unit within Clone Commander Bly's 327th Star Corps. Deviss served in the first battle of the Clone Wars on the Outer Rim planet Geonosis. During the battle, Deviss risked his life to protect two injured soldiers from Confederate spider droids and received a medal after being rescued from behind enemy lines by Republic troops. He went on to fight in the Battle of Altyr V, after which he was promoted to commander for his actions. Deviss was dispatched to support Jedi General Nem Bees on Orto. During a battle on the planet, the Commander received Order 66 and personally shot down Bees on the front lines.
}}

{{CRLctnlevels}}

{{CRLgmlapproval}}

{{CRLrequirements}}

{{CRLtemplate|File:Deviss Helmet.jpg | Helmet|
*Episode 3 style Clone Helmet - Fanmade bucket. Some "name brand" helmets may be unacceptable.
*Visor - Black Visor.
*Helmet mohawk on dome.
*Vertical kill stripes on each side of helmet cheeks that are dark blue in color.
*Helmet frown is charcoal grey in color. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
*Primer grey stripe around back of dome.
*Ear caps are painted a dark grey.
**There is a red stripe down the center of the helmet that ends at the nose of the helmet and squares off at the rear of the helmet.
*Binoc set mounted to the helmet.|
*Helmet has the appearance of a neck ring. |
*Helmet has an enclosed complete neck ring that seals the helmet to the neck.
*Binoc set mounted to the helmet and the binocs can move up and down. }}

{{CRL-realistic-clone-neckseal}}

{{CRL-generic-undersuit}}

{{CRLtemplate|File:Deviss Shoulders.jpg|Shoulder Bells|
*Armor should be painted matte or satin white.
**Red command stripe. Front part of the stripe is painted like any other command stripe. The rear part of the stripe should be placed in the center of the bell. This is a forward facing stripe.
*Shoulders should be tear drop in shape with all rounded edges. | |
*Shoulder bells should not be symmetrical. The Shoulder bells should slightly curve back at the bottom of the shoulder. }}

{{CRLtemplate|File:Deviss Bicep.jpg|Upper Arm Armor|
*Armor should be painted matte or satin white.
**Red stripe starts on the hard outside edge of the bicep and goes to the middle of the outside bicep. It is not the same as the EII command stripes.
*3 smaller white ammo boxes are attached to the right bicep on a brown strap.
*Should have a dimple on the lower area of the back of the arm. The outside of the bicep should have a hard line edge at the front that turns in. The inside of the upper arm should be rounded. | |
*Armor should be seamless. No visible traces of how the armor was assembled should be shown.}}

{{CRLtemplate|File:327th elbow armor.jpg |Elbow Armor|
*Armor should be painted matte or satin white.
*There are two elbows. On each elbow on the outside of the body near the connection point of the elbow strap there should be detail slots that look like an equal symbol on both elbow pieces.
* Both elbows have strapping. The straps should have a raised detail line at the top and bottom of the strap.| |
*Elbows should be mirror images of each other with a notched area on the outside of the elbow above the detail marks.}}

{{CRLtemplate|File:Deviss fore arms.jpg |Forearm Armor|
*Armor should be painted matte or satin white.
**Two inch Red stripe on the top part of the forearm. On the right arm it would cover over the compad. The com pad should be left white. This design should be matched on the left forearm. Acceptable options for the left arm would be to either add a second compad, in paint, leave an outline of a compad, or leave just the stripe.
*Both left and right forearms should be mirror images of each other.
*Right forearm should have a compad that has 8 small buttons,1 Large main button, and 1 slightly smaller rectangular button.
*Forearm tops should have a flattened triangular area that have a ridge that comes to a point at the top of the forearm. | |
*Compad has detail antenna on its left.
*A second compad on the left forearm or a painted outline of a compad on the left forearm is acceptable
*Instead of a hard edge the top of the forearm has a bone ridge.
*Armor should be seamless. No visible traces of how the armor was assembled should be shown.}}

{{CRLtemplate|File:Deviss Hand Plates.jpg|Hand Plates|
*Armor should be painted matte or satin white.
**2 inch red stripe running center of the hand plate.
*Hand plates are mirror images of each other.
*Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand. | | }}

{{CRL-generic_black_gloves}}

{{CRLtemplate|File:Deviss Pauldron.jpg|Command Pauldron|
*Pauldron should be Episode III style. The mantle over the left shoulder should be colored in the command red. Right shoulder mantle should be all black. As well, the paneling on the remainder of the pauldron should be black too. On the right side of the Pauldron, a ammo belt is strung down to the belt. | | }}

{{CRLtemplate|File:327th chest ammo belt.jpg|Chest Ammo Belt|
*3 white, brown and black detailed ammo boxes attached to a Grey strap on right side of chest. | | }}

{{CRLtemplate|File:Deviss Chest Plate.jpg|Chest Armor|
*Armor should be painted matte or satin white.
**Red command stripe approximately 2 inches wide marked center vertical from neck to upper return curve.
*Two detail slots on right breast.
*Chest and back plate should match together at the sides with no gap, just a seam line.
*Shoulder straps should be placed underneath the chest to connect to the back. | |
* Shoulder straps should be slotted into the chest into the detail ridges of the top connection points. }}

{{CRLtemplate|File:327th back armor.jpg|Back Armor|
*Armor should be painted matte or satin white.
*Rear tank has detailed area that contains 4 circles. Under the circles at the left side of the back there should be two parallel lines and the the right of the back there should a be a squared detail.
*Chest and back plate should match together at the sides with no gap, just a seam line.
*Shoulder straps should be placed underneath the chest to connect to the back. | |
*Shoulder straps should be slotted into the Back into the detail ridges of the top connection points.
*Highly detailed resin insert should replace softer details. }}

{{CRLtemplate|File:327th ab armor.jpg|Ab Armor|
*Armor should be painted matte or satin white.
*Four 1/4" diameter holes per side on indents of ab plate, eight holes total.
*Ab section should wrap around the wearers body and be sealed at the sides or at the back.
*Ab section should be completely contained under the chest and back armor. ||
* Ab section should be seamless at the sides and close in the back. A detail plate should cover the seam line and hide all work.}}

{{CRLtemplate|File:327th cod and posterior armor.jpg|Cod and Posterior Armor|
*Armor should be painted matte or satin white.
*Cod and Posterior armor should connect at the hips. | |
*Hips should be connected via a snap with the correct detailed shape of the armor at the connection point. }}

{{CRLtemplate|File:Deviss Belt.jpg |Belt|
*Armor should be painted matte or satin white.
*Ammo Belt with boxes and detonator.
*Detonator is centered on the back of belt.
*8 boxes total, 4 on each side of abdomen and attached to the belt. ||
*Belt Boxes should be notched and fitted flush with the details of the belt.
*Left Rear belt box should have two square buttons in the top left corner and and equal symbol detail at the bottom right.
*Right Rear belt box should have a bar with two small cylinders centered with and equal symbol detail on the bottom left.
*From the rear two belt boxes the belt should have a ribbed detailed appearance.}}

{{CRLtemplate|File:327th kama.jpg|Kama|
*Kama should be kakki or tea brown color. The Kama should not be lined with matching color fabric The rear of the Kama has a split that denotes it as a two piece . Kama should start at the front belt boxes. Kama should be from a heavy material like canvas or a tight weave burlap. Kama should flow to the bottom of your knee armor. There are two straps from the kama that connect to a command buckle centered to the front of the belt. | |}}

{{CRLtemplate|File:327th thigh armor.jpg|Thigh Armor|
*Armor should be painted matte or satin white.
* Front of thigh armor should have a flat triangular area near the knee. From the top of the triangle a ridge line should go up the front of the thigh to the top.
*Rear of the thigh should have an indention. | |
* Outside of lower portion of the thighs should come to a point and inner lower end should be rounded.
*Armor should be seamless. No visible traces of how the armor was assembled should be shown. }}

{{CRLtemplate|File:Deviss Knees.jpg|Knee Armor|
*Armor should be painted matte or satin white.
*Knees should have a red stripe that starts at the top and runs vertically down to the bottom of the knee.
*Knees should wrap around the front of the leg. From top center a raised detail line should be present.
*Knees should be strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.| |
*Center strap should be primer gray.
*Connection between the knee and the strapping should have a detail clip.}}

{{CRLtemplate|File:327th lower leg armor.jpg|Lower Leg Armor|
*Armor should be painted matte or satin white.
*Lower Legs are mirror images of each other. The front of the armor should have a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
*Back of the lower legs should have an indentation just under the calf the follow down to the ankle.
*Calf can have an access area on the inside of the leg. The outside of the calf should be closed. ||
*Calves should be seamless and have a trap door access through the indent in the rear of the lower leg.}}

{{CRLtemplate|File:Deviss Boot.jpg|Boots|
* White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor.
* Boots must be lace-less and have flat soles.
* Boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap. This strap should be painted .
* Across the shoe just infront of detail strap another thin stripe painted red should also be placed on the boot.
* There should be no markings or labels from the shoe makers.
* The shoe soles should be gray. | | }}

{{CRLsubheading|Hip Mounted Accessories:}}

{{CRLtemplate|File:CRL side arms.jpg|Commander Pistols|
*Holster and pistol set. These are hung from the belt and hang at the hip on each side. | | }}

{{CRLaccessories}}

{{CRLdc15s-realistic}}

{{CRLdc15a-realistic}}

{{CRLfooter|CTN_CRL|C}}

Template:CRLblackflightsuit

2012-05-09T02:11:27Z

Stormtrooperguy:

{{CRLtemplate|File:Generic-black-coverall.jpg|Black Imperial Flight Suit|
* One piece black coverall/jumpsuit/flight suit with a front invisible zipper.
* Approximately 1.5" (38.1mm) tall mandarin collar with a chevron shaped, left-over-right velcro closure.
* A silver or white "imperial cog" emblem on a black background must be present on both shoulders. The cog should be 3" or 3.5" in diameter, and 1" from the shoulder seam.
* On the left forearm there is a com-pad pocket approximately 5" (127mm) wide by 5.75" (146.05mm) tall with no flap and a 2.25" (57.15mm) window in it. (Size might vary to match your com-pad)
* On the left bicep, about 2"(50.8mm) below the cog emblem, there is a code cylinder pocket with no flap, and vertical stitching dividing it into pen sleeves.
* The bottom front corner of the pocket is cut off at a bevel on the side pointing in view direction with the broader upside forming the border of the pen sleeves.
* The right sleeve has a cargo pocket about 6" (152mm) wide and 5.75" (146mm) on the bicep approximately 2"(50.8mm) below the cog emblem. The pocket has a 2"(50.8mm) flap.
* 2 large chest pockets and 2 large front pockets below the belt without any zipper or flaps
* 2 leg pockets with flaps similar in proportion as the one on the right arm sleeve. Size may differ. (Usually the width of the front pockets equals the width of the leg pockets)
* Rank bars of any kind are not permitted.| |
* In the films, the Imperial patches on the shoulders were printed vinyl rather than embroidered.
* The suit should have a pointed collar in the back. }}

Costuming:TI TIE Pilot ANH

2012-05-09T02:10:41Z

Stormtrooperguy:

{{CRLheader|TIE Pilot, A New Hope|File:TI_pilot_anh.jpg|TI 6854|Ed Eliason}}

{{CRLdetinfo| 1102 |TIE Pilot, ANH|TI|Star Wars Episode 4|
TIE pilots served in the Imperial Navy by piloting the various TIE series starfighters.}}

{{CRLjrslevels}}

{{CRLgmlapproval}}

{{CRLrequirements}}

{{CRLtemplate-nolevels|File:TI_rotj_helmet.jpg|Helmet|
*See the [[Costuming:TI_TIE_Pilot_Helmet-detail|TIE Helmet Detail page]] for more views and information about canon paint schemes.
*Helmet may have flat or bubbled lenses in Dark Gray or Dark Green.
*The helmet must also have imperial disks (greeblies) on the ear wells.
*Two 2.75" diameter Imperial Emblems in either white or silver should be on the crest of the helmet as seen in the diagrams below.
*The frown between the teeth may optionally be drilled out. If the teeth are cut out, the openings must be backed by material so that the face is not seen.
*Colours of markings may range from chrome to silver, brushed aluminum to light gray to dark gray (gun metal), but must be consistent - pick a colour and stick with it| }}

{{CRLtemplate-nolevels|File:Blankwhite.gif|Hoses|
*Black Ribbed Hoses with a 1.25" diameter and 18" to 21" in length from the helmet hose port to connect to the chestbox upper hose ports.||}}

{{CRLgeneric-balaclava}}

{{CRLblackflightsuit}}

{{CRLcommpad}}

{{CRLtemplate-nolevels|File:TI_armor.jpg|Armour|
*Should consist of the front and back armor as shown, with two shoulder straps anchored by an octagon of plastic on each end. Black Nylon webbing or elastic should also be allowed to aid in the snug fit of the armor. The shoulder straps should not be load bearing. Being plastic they can crack.||}}

{{CRLtemplate-nolevels|File:TI_ANH_chest_box.jpg|Chestbox|
*The chestbox is required to have the same configurations as seen in these photos.
*The box has 4 1" square x 1/8th" thick detail pieces. There are several canon configurations that are acceptable:
**2 white, 2 blue
**1 Red, 1 White, 2 Blue
** 1 Gray, 1 White, 2 Blue.
* The rockers are always 2 Gray with dots or lamps in their bottom (LEDs or Lights are optional but should be approved.)||}}

{{CRLofficerbelt}}

{{CRLblack-gauntlet-gloves}}

{{CRLgeneric-black-boots}}

{{CRLfooter|JRS_CRL|T}}

Template:CRLfooter

2012-05-09T02:08:48Z

Stormtrooperguy: Protected "Template:CRLfooter" ([edit=sysop] (indefinite) [move=sysop] (indefinite))

[[Category:{{{1}}}|{{{2}}}]]
<includeonly>[[Category:CRL|{{{2}}}]]</includeonly>

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

[{{fullurl:{{FULLPAGENAMEE}}|action=pdfbook&format=single}} This CRL is available as a PDF] at www.501st.com/databank/Costuming:{{PAGENAMEE}}

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

<center>Visit www.501st.com to learn more.</center>

Template:CRLjrslevels

2012-05-09T02:08:30Z

Stormtrooperguy: Protected "Template:CRLjrslevels" ([edit=sysop] (indefinite) [move=sysop] (indefinite))

{|style="background-color:#ffffff; text-align:left" width="100%" cellspacing="10"
|-
|
The 501st approval requirements are listed in black. For Legion approval, only these requirements must be met.

While the Jolly Roger Squadron does not have any detachment specific costume certification programs, some parts of the costume below may be shared with other detachments that do. Features listed in blue or red are not required for 501st approval, but are noted here for those interested in these additional details.

|-
|align="center" colspan=2|<hr width="90%">
|}

Template:CRLjrslevels

2012-05-09T02:07:34Z

Stormtrooperguy:

Template:CRLgeneric-black-boots

2012-05-08T21:44:55Z

Stormtrooperguy:

{{CRLtemplate|File:Generic-black-boots.jpeg|Black Boots|
*Calf high black leather or leather like material.
*Free of laces, decorative stitching, buckles on the instep or any other embellishments. Adjustment straps on top of bootleg are acceptable.
*Zippers on the inside of the boot are acceptable, so long as they are concealed. If the zipper is not covered by vinyl/leather, it should be painted black.
* German "jack boot" style boots are most canon.|
* Boots shall be made of leather.|
* Boots shall be German jack boots or an authentic replication thereof. }}

Template:CRLtemplate-nolevels

2012-05-03T18:08:18Z

Stormtrooperguy:

{|style="background-color:#ffffff; text-align:left" width="100%" cellspacing="10"
|-
|style="text-align:left;" valign="top" width=170 rowspan="3"|[[{{{1}}}|150px]]
|style="text-align:left;" valign="top"|{{{2}}} For 501st approval: {{{3}}} 
|-

|align="center" colspan="2"|

|}

Template:CRLtemplate-nolevels

2012-05-03T18:07:34Z

Stormtrooperguy:

{|style="background-color:#ffffff; text-align:left" width="100%" cellspacing="10"
|-
|style="text-align:left;" valign="top" width=170 rowspan="3"|[[{{{1}}}|150px]]
|style="text-align:left;" valign="top"|{{{2}}} For 501st approval: {{{3}}} 
|-

|align="center" colspan="2"|

|}

Template:CRLtemplate-nolevels

2012-05-03T18:06:40Z

Stormtrooperguy:

{|style="background-color:#ffffff; text-align:left" width="100%" cellspacing="10"
|-
|style="text-align:left;" valign="top" width=170 rowspan="3"|[[{{{1}}}|150px]]
|style="text-align:left;" valign="top"|{{{2}}} For 501st approval: {{{3}}} 
|-
|align="center" colspan="2"|  

|}

Template:CRLtemplate-nolevels

2012-05-03T18:06:07Z

Stormtrooperguy:

{|style="background-color:#ffffff; text-align:left" width="100%" cellspacing="10"
|-
|style="text-align:left;" valign="top" width=170 rowspan="3"|[[{{{1}}}|150px]]
|style="text-align:left;" valign="top"|{{{2}}} For 501st approval: {{{3}}} 

|-
|align="center" colspan="2"|

|}

Template:CRLtemplate-nolevels

2012-05-03T18:05:44Z

Stormtrooperguy:

{|style="background-color:#ffffff; text-align:left" width="100%" cellspacing="10"
|-
|style="text-align:left;" valign="top" width=170 rowspan="3"|[[{{{1}}}|150px]]
|style="text-align:left;" valign="top"|{{{2}}} For 501st approval: {{{3}}} 

|-
|align="center" colspan="2"|

|}

Costuming:TI TIE Pilot RotJ

2012-05-03T18:04:30Z

Stormtrooperguy:

{{CRLheader|TIE Pilot|File:TI_rotj_full.jpg|Greg "FryGuy" French|TI-4734}}

{{CRLdetinfo| 1102 |TIE Pilot|TI|Star Wars 6|
TIE pilots served in the Imperial Navy by piloting the various TIE series starfighters.The Return of the Jedi TIE pilots feature a third, grey hose going from the chest box to either the back armor or belt of the pilot.}}

{{CRLjrslevels}}

{{CRLgmlapproval}}

{{CRLrequirements}}

{{CRLtemplate|File:TI_rotj_helmet.jpg|Helmet|
*See the [[Costuming:TI_TIE_Pilot_Helmet-detail|TIE Helmet Detail page]] for more views and information about canon paint schemes.
*Helmet may have flat or bubbled lenses in Dark Gray or Dark Green.
*The helmet must also have imperial disks (greeblies) on the ear wells.
*Two 2.75" diameter Imperial Emblems in either white or silver should be on the crest of the helmet as seen in the diagrams below.|
*The frown between the teeth may be drilled out but if so, then it must be backed by material so that the face is not seen.
*Colours of markings may range from chrome to silver, brushed aluminum to light gray to dark gray (gun metal), but must be consistent - pick a colour and stick with it| }}

{{CRLtemplate-nolevels|File:Blankwhite.gif|Hoses|
*2 black ribbed hoses with a 1.25" diameter and 18" to 21" in length from the helmet hose port to connect to the chestbox upper hose ports.
*1 grey ribbed hose with a 1" diameter connecting from the lower left of the chest box to the belt under the left arm.|}}

{{CRLgeneric-balaclava}}

{{CRLblackflightsuit}}

{{CRLcommpad}}

{{CRLtemplate-nolevels|File:TI_armor.jpg|Armour|
*Should consist of the front and back armor as shown, with two shoulder straps anchored by an octagon of plastic on each end. Black Nylon webbing or elastic should also be allowed to aid in the snug fit of the armor. The shoulder straps should not be load bearing. Being plastic they can crack.||}}

{{CRLtemplate-nolevels|File:TI_RotJ_chest_box.jpg|Chestbox|
*The chestbox is required to have the same configurations as seen in these photos.
*The box has 4 1" square x 1/8th" thick detail pieces. There are several canon configurations that are acceptable:
**2 white, 2 blue
**1 Red, 1 White, 2 Blue
** 1 Gray, 1 White, 2 Blue.
* The rockers are always 2 Gray with dots or lamps in their bottom (LEDs or Lights are optional but should be approved.)
* RotJ rockers are wedge shaped.
* A third, grey hose comes out of the lower left, connecting to the back armor under the left arm.||}}

{{CRLofficerbelt}}

{{CRLblack-gauntlet-gloves}}

{{CRLgeneric-black-boots}}

{{CRLaccessories}}

{{CRLfooter|JRS_CRL|T}}