(Difference between revisions)
Line 6: Line 6:
{{CRLrequirements}}
{{CRLrequirements}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_helmet.jpeg|Helmet|
 
-
* Lenses must be sufficiently dark enough to obscure the costumer's eyes. They may be flat or bubble.
 
-
* The black "ear" bars have three of four bumps
 
-
* Frown must have either 6 or 8 teeth cut out and any coloring must not leave indented area.
 
-
* Tube stripes may number between 9 and 15 per side with the curve bends extending backwards. There does not need to be the same number per side.
 
-
* Aerators (cylinders on either side of the vocoder) are black, and screening maybe silver or black.
 
-
* Tears, traps, and tube stripes may be: hand painted, decals, or decals that replicate hand painting, they may also be untouched and left as unmodified shiny black helmet material.
 
-
 
-
* Accepted helmet color combinations are as follows:
 
-
** Smoke/black lenses, black frown (gloss), black chin / vocoder (matte or gloss), black tube stripes, tears and temples (matte or gloss).
 
-
** Smoke/black lenses, black frown (gloss), black chin / vocoder (matte or gloss), navy blue tube stripes, tears and temples (matte or gloss). This variation is acceptable only when paired with a navy blue undersuit.
 
-
** Silver lenses, black frown, black chin, black tube stripes, tears and temples (matte or gloss).
 
-
** Silver lenses, silver frown, black or silver/grey chin, black tube stripes, tears and temples (matte or gloss).||}}
 
{{CRL_tx_stormtrooper_helmet}}
{{CRL_tx_stormtrooper_helmet}}
-
 
{{CRL_generic_tk_neckseal}}
{{CRL_generic_tk_neckseal}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_shoulderstraps.jpeg|Shoulder Straps|
 
-
* These must be securely mounted in front and may free float in back.||}}
 
{{CRL_tx_stormtrooper_shoulderstraps}}
{{CRL_tx_stormtrooper_shoulderstraps}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_shoulderbells.jpeg|Shoulder Bells|
 
-
*One on each shoulder. The shoulder bells are considered effectively symmetrical; they may worn interchangeably on the left and right shoulders.||}}
 
{{CRL_tx_stormtrooper_shoulderbells}}
{{CRL_tx_stormtrooper_shoulderbells}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_biceps.jpeg|Biceps|
 
-
* Biceps are fully closed.||}}
 
{{CRL_tx_stormtrooper_biceps}}
{{CRL_tx_stormtrooper_biceps}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_forearms.jpeg|Forearms|
 
-
* Forearms must be either permanently sealed on both seams or able to open and firmly close provided one seam is permanently closed.||}}
 
{{CRL_tx_stormtrooper_forearms}}
{{CRL_tx_stormtrooper_forearms}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_handplates.jpeg|Handplates|
 
-
* Roughly pentagonal in shape, the hand plates are mounted securely over the back of the glove. As an alternative to plastic, these may be made out of latex or latex-like material but must remain shiny.||}}
 
{{CRL_tx_stormtrooper_handplates}}
{{CRL_tx_stormtrooper_handplates}}
Line 64: Line 34:
{{CRL_tx_stormtrooper_butt}}
{{CRL_tx_stormtrooper_butt}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_belt.jpeg|Belt|
 
-
* Belt face is made of plastic (ammo belt). It is comprised of 6 rectangular boxes, with three square buttons, one centered in the middle and one on each end.
 
-
* Belt proper is made Shiny Black ABS or similar shiny material and must be 3 to 3.5" wide. Black canvas or similar heavy material is also acceptable
 
-
* The drop boxes dangle from the sides of the plastic belt face via black straps and are aligned under the plastic tabs of the ammo belt.||}}
 
{{CRL_tx_stormtrooper_belt}}
{{CRL_tx_stormtrooper_belt}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_detonator.jpeg|Thermal Detonator|
 
-
* (a.k.a. O2 canister) attaches to the back of the belt. This is an all black cylinder 2 to 2.5" in diameter with black end caps and a black control panel pad, with controls closest to the right end cap.||}}
 
{{CRL_tx_stormtrooper_detonator}}
{{CRL_tx_stormtrooper_detonator}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_thighs.jpeg|Thigh Armor|
 
-
* The thigh armor may be able to open and firmly close in the back, but must be permanently sealed in the front. The ammo belt is installed on the bottom of the right thigh.||}}
 
{{CRL_tx_stormtrooper_thighs}}
{{CRL_tx_stormtrooper_thighs}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_shins.jpeg|Shin Armor|
 
-
* The shin armor is able to open and firmly close in the back, but must be permanently sealed in the front. The trapezoid knee plate is affixed to the top of the left shin.||}}
 
{{CRL_tx_stormtrooper_shins}}
{{CRL_tx_stormtrooper_shins}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_boots.jpeg|Boots|
 
-
* Black leather or leather-like, above ankle height, with a flat sole, and small U-shaped elastic sections on both sides of the ankle with no buckles or laces. Jodphur-type boots or an equivalent style.
 
-
* Elvis / Mariachi boots are not acceptable.
 
-
* All stitching must be black, and unnecessary or decorative stitching must not be present.
 
-
* White, or other color boots painted black are allowed so long as the boots are seen and maintained as black when finished.||}}
 
{{CRL_tx_stormtrooper_boots}}
{{CRL_tx_stormtrooper_boots}}
-
 
-
{{CRLtemplate|File:TX_shadowstorm_holster.jpeg|Holster|
 
-
Made of black leather or leather-like material.
 
-
Holster must be worn on the left and be may be attached to the belt from behind or with loops covering the outside of the belt.||}}
 
{{CRL_tx_stormtrooper_holster}}
{{CRL_tx_stormtrooper_holster}}

Revision as of 20:22, 9 November 2011

crlblackhd.gif
Shadow Stormtrooper
Missingprofile.jpg
Model , Photo by


Special-Ops-Detachment.png

Description: Shadow Stormtrooper
Prefix: TX
Detachment: Spec Ops Detachment
Context:


  • This CRL is a work in progress. This costume may be approved by GMLs, but additional research should be done until the CRL is complete.
  • If you have this costume and would like to assist with this CRL, please contact your detachment leader!
  • Please note that the use of the word "should" below does not indicate that a requirement is optional. All instances of should will be replaced with must as this guide is completed.
Required Costume Components

The following costume components must be present and appear as described below for approval .


TX shadowstorm helmet.jpeg Helmet
For 501st approval:
  • Lenses must be sufficiently dark enough to obscure the costumer's eyes. They may be flat or bubbled. Acceptable colors are: black, smoke, dark green, or silver.
  • The body of the "ears" may be black or gray. The bars have three or four bumps and may be left the same color as the body or painted black.
  • The frown must have either 6 or 8 teeth cut out and any coloring must not leave the indented area. Acceptable colors are: black, gray or silver. If there are spaces between the teeth the wearer's face must not be seen
  • The tube stripes are black in color and may number between 9 and 15 per side with the curve bends extending backwards. These may be hand painted or decals. There does not need to be the same number per side.
  • Vocoder (vertically ribbed chin detail) may be black or silver.
  • The aerators (cylinders on either side of the vocoder) are black, and screening maybe silver or black.
  • Traps (trapezoids on dome of helmet) and tears (area beneath the corners of eye lenses) may be: hand painted, decals. Acceptable colors are: black or gray. Rear traps and tears may have vertical black lines.



TK anh stunt neckseal.jpeg Neck Seal
For 501st approval:
  • Black with horizontal ribs, fitted to the wearer, and extending from the base of the neck to the top of the Adam's apple.
For level two certification (if applicable):
For level three certification (if applicable):


TX shadowstorm shoulderstraps.jpeg Shoulder Straps
For 501st approval:
  • These must be securely mounted in front and may free float in back.



TX shadowstorm shoulderbells.jpeg Shoulder Bells
For 501st approval:
  • One on each shoulder. The shoulder bells are considered effectively symmetrical; they may worn interchangeably on the left and right shoulders.



TX shadowstorm biceps.jpeg Biceps
For 501st approval:
  • Biceps are fully closed.



TX shadowstorm forearms.jpeg Forearms
For 501st approval:
  • Forearms must appear to be fully sealed and enclosed.



TX shadowstorm handplates.jpeg Handplates
For 501st approval:
  • Roughly pentagonal in shape, the hand plates are mounted securely over the back of the glove. As an alternative to plastic, these may be made out of latex or latex-like material but must remain glossy.



TK anh stunt gloves.jpeg Gloves
For 501st approval:
  • Black in color, made of either rubber, nomex, leather, or leather-like material, with no visible straps or logos/designs. The fingers are enclosed, non-textured.
For level two certification (if applicable):
For level three certification (if applicable):


TX shadowstorm chest.jpeg Chest Plate
For 501st approval:
  • Chest plate overlaps the abdominal plate.



TX shadowstorm back.jpeg Back Plate
For 501st approval:
  • Back plate contains a "O II" design with little or no overlap of the kidney plate.



TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.



TX shadowstorm ab.jpeg Abdominal Plate
For 501st approval:
  • The ab plate has a button area that has 9 gloss black buttons of approximately 7/16" in diameter.



TX shadowstorm kidney.jpeg Kidney Plate
For 501st approval:
  • It is allowable to have a single kidney/butt plate for 501st requirements. If a separate kidney plate is used, it should line up with the ab plate, with the top of the kidney plate being flush to or under the back plate.



TX shadowstorm butt.jpeg Butt Plate
For 501st approval:
  • It is allowable to have a single kidney/butt plate for 501st requirements. If a separate butt plate is used, it should line up below the bottom of the belt with with the ab plate, with minimal gap between it and the kidney plate.



TX shadowstorm belt.jpeg Belt
For 501st approval:
  • Belt face is made of plastic (ammo belt). It is comprised of 6 rectangular boxes, with three square buttons, one centered in the middle and one on each end.
  • Belt proper may be made from glossy black ABS or a similar shiny material and must be 3 to 3.5" wide. Black canvas or similar heavy material may also be used.
  • The drop boxes dangle from the sides of the plastic belt face via black straps and are aligned under the plastic tabs of the ammo belt.



TX shadowstorm detonator.jpeg Thermal Detonator
For 501st approval:
  • (a.k.a. O2 canister) attaches to the back of the belt. This is an all black cylinder 2 to 2.5" in diameter with black end caps and a black control panel pad, with controls closest to the right end cap.



TX shadowstorm thighs.jpeg Thigh Armor
For 501st approval:
  • The thigh armor may open and firmly close in the back allowing the two halves to appear sealed when viewed by spectators. The ammo belt is installed on the bottom of the right thigh.



TX shadowstorm shins.jpeg Shin Armor
For 501st approval:
  • The shin armor is able to open and firmly close in the back allowing the two halves to appear sealed when viewed by spectators. The trapezoid knee plate is affixed to the top of the left shin.



TX shadowstorm boots.jpeg Boots
For 501st approval:
  • Black leather or leather-like, above ankle height, with a flat sole, and small U-shaped elastic sections on both sides of the ankle with no buckles or laces. Jodphur-type boots or an equivalent style. All stitching must be black, and unnecessary or decorative stitching must not be present. Elvis / Mariachi boots are not acceptable.
  • White, or other color boots may be painted black so long as the boots are maintained to remain the proper color.



TX shadowstorm holster.jpeg Holster
For 501st approval:
  • Made of black leather or leather-like material.
  • Holster must be worn on the left and be may be attached to the belt from behind with rivets or with loops covering the outside of the belt.


Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present must meet the guidelines below.


Generic black pauldron.jpeg Black Pauldron
For 501st approval:
  • Must be black in color and made from vinyl or leather. Must be worn over the right shoulder.
For level two certification (if applicable):
For level three certification (if applicable):


TK anh stunt e11.jpeg BlasTech E-11
For 501st approval:
  • Based on a real or replica Sterling sub-machine gun, scratch-built, or a modified commercial toy Stormtrooper blaster.
For level two certification (if applicable):
  • Folding stock (does not need to function).
  • A real or replica ammo counter - based off of a Hengstler counter - should be present.
  • D-ring mounted on the rear.
  • Correct style scope.
  • Two power cylinders on the magazine.
  • Scratch-built, resin cast, Hyperfirm rubber cast blasters should have a total of 6 t-racks on blaster (leaving the lowest row on the Hengstler side un-covered).
  • Popular commercially available toy Stormtrooper blasters have a total of 7 T-racks (if you cover all the rows of holes) or 6 T-racks (if you cover the "open row" of holes on the Hengstler side.
  • Below this, you must grind off the lower T-rack and drill a new row of holes).
For level three certification (if applicable):


Generic-dlt19.jpeg BlasTech DLT-19 Heavy Blaster Rifle
For 501st approval:
  • Based on a real or replica MG-34 machine gun.
For level two certification (if applicable):
  • A DLT-19 is an MG-34 with T-tracks on the barrel, ejection port cover added, and a small disk on left side.
For level three certification (if applicable):
Retrieved from "http://www.501st.com/databank/Costuming:TX_shadow_stormtrooper"
NAVIGATION
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm LLC, it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2013 Lucasfilm LLC & ™ All rights reserved. Used under authorization.