(Difference between revisions)
 
(20 intermediate revisions not shown)
Line 1: Line 1:
{{CRLheader|Snow Scout|File:Missingprofile.jpg|None|None|}}
{{CRLheader|Snow Scout|File:Missingprofile.jpg|None|None|}}
-
{{CRLdetinfo|1107|Snow Scout|TS|Star Wars. These troopers wear special cold weather gear for hostile climates|}}
+
{{CRLdetinfo|1107|Snow Scout|TS|Star Wars.
-
{{CRLwiplmoapproval}}
+
When deployed to frozen, hostile environments, Scouts are equipped with a hybrid of cold weather armor. This armor combines the survival gear of the Snowtrooper with the needed equipment to carry out the scouting mission.|}}
-
 
+
-
{{CRLrequirements}}
+
{{CRLbflevels}}
{{CRLbflevels}}
-
{{CRLtemplate|File:TB_scout_helmet.jpeg|Helmet|
+
{{CRLwipgmlapproval}}
-
*Gloss white, semi-gloss, or lightly weathered.
+
 
-
*Dark green or black lenses.
+
{{CRLrequirements}}
-
*Licensed helmets are acceptable with modifications:
+
 
-
**Remove the manufacturer logo.
+
{{CRLtemplate-nolevels|File:TB_scout_helmet.jpeg|Helmet|
 +
*Scout Style helmet
 +
*Helmet is gloss or semi-gloss white.
 +
*Licensed helmets are acceptable with modifications-
 +
**Remove manufacturer logos
**Replace stock lens.
**Replace stock lens.
-
**Replace inaccurate "fish-hook" logo
+
**Replace inaccurate fish hook symbol with correct square shaped symbol.
-
**Replace stock visor bolts with flat-disc "elevator" bolts.
+
**Replace stock bolts and with correct flat bolt head, or real 3M bolt, painted either grey or white.
-
**Visor Bolts painted white.
+
-
**Replace inaccurate aerator.  
+
*Fan-made helmets are acceptable as long as they remain true to shape of original screen accurate helmet.
*Fan-made helmets are acceptable as long as they remain true to shape of original screen accurate helmet.
-
**If needed, modify to correct shape of screen accurate helmet||}}
+
*Helmet may be lightly weathered.||}}
-
{{CRLtemplate|File:Blankwhite.gif|Neck Seal|
+
{{CRLtemplate-nolevels|File:Generic_Balaclava_White.jpg|Balaclava|
-
*Made from tan or off white cotton fabric matching color of vest.
+
*White balaclava worn under the helmet.
-
*Velcro enclosure, vertically down center of back.
+
**The balaclava is a White head sock/hood that is worn under the helmet and is used primarily to hide any view of the wearer's skin and/or facial hair.|}}
-
*Horizontal rows, evenly spaced.
+
-
**Any excess material on bottom is tucked into the flight suit.||}}
+
-
{{CRLtemplate|File:Blankwhite.gif|Flight Suit|
+
{{CRLtemplate-nolevels|File:Blankwhite.gif|Flight Suit|
-
* See the [[Costuming:TB_scout_trooper-suitdetail|Scout Trooper Flight Suit]] page for detailed images of the patches described below.
+
*The under-suit is a one or two-piece white textile suit, such as military flight-suits, motorcycle racing suits, industrial work clothing (Dickies), or similar suit modified appropriately.
 +
*Suit includes a off-white (oatmeal) suede or faux suede rear flap.
 +
**Flap is rectangle in shape
 +
**Attachment point is above the waist and hidden by the cummerbund.
 +
**The flap is slightly narrower than the width of the trooper and stops slightly higher than the bottom of the troopers behind.
 +
*Off-white (oatmeal) suede or faux suede thigh patches are present.
 +
**Patches extend over the crotch of the flight suit and down the front, finishing above the knee armor.
 +
**The thigh patches are secured by 50mm (2") white elastic, sewn in under the front and back of the thigh patch.
 +
*Flight suit does not have any visible labels, logos or zippers (including built in flight suit pockets).||}}
-
* The undersuit is a one or two-piece white textile suit, such as military flightsuits, motorcycle racing suits, industrial work clothing (coverall), or similar suit modified appropriately.
+
{{CRLtemplate-nolevels|File:Blankwhite.gif|Vest|
-
*Tan suede or faux suede thigh patches must be present, extending over the flight suit crotch and down the front finishing above the knee armor.
+
*Vest is constructed from matte white, heavy weight cotton fabric.
-
**The thigh patches must be secured by 2” white elastic, sewn in under the front and back of the thigh patch.
+
*Sleeves are padded and contain ribbing similar to the front of the cummerbund. The sleeves extend farther than the bottom edge of the shoulder armor, but end above the elbow.
-
*Must have a suede or faux suede, rectangle shaped, rear flap.
+
*Vest has a much wider neck opening than the flight suit.
-
**The flap is attached above the waist with the attachment point hidden by the cummerbund.
+
- Secured at the back using white, 50mm (2") hook and loop fastener.||}}
-
**The flap should be slightly narrower than the width of the trooper and stop slightly higher than the bottom of the troopers rear.
+
-
**The flap is tan in color, matching the riding patch.
+
-
*Suit must not have any visible labels, logos or zippers (including built in flight suit pockets).||}}
+
-
{{CRLtemplate|File:Blankwhite.gif|Vest|
+
{{CRLtemplate-nolevels|File:Blankwhite.gif|Cummerbund|
-
*Made out of tan or off white matte finish heavy weight cotton fabric.
+
*Cummerbund is constructed from matte white, heavy weight cotton or nylon fabric.
-
*Sleeves should be padded and contain ribbing similar to the front of the cummerbund. The sleeves should end just slightly longer then the bottom edge of the shoulder armor.
+
*Closes in back using white, 50mm (2")  hook and loop fastener.
-
*Must have a much wider neck opening then the flight suit.
+
*Cummerbund starts just under the chest armor and extends down to the waist.
-
*Secured at the back using 2” white Velcro.||}}
+
*There is no gap between the belt and cummerbund.
 +
*Cummerbund has a tapered crotch area with inverted curve stitched detail.
 +
**This section is made from the same heavy weight cotton or nylon material.  **Sits between the legs and connects to the back of the cummerbund by a 50mm (2") white elastic strap.
 +
*Cummerbund has 6 or 7 vertical stitch lines producing 5 or 6 raised ribs of equal width.
 +
**Ribs are stitched into the front, between the two fabric pouches.
 +
*Cummerbund may be lightly weathered.||}}
-
{{CRLtemplate|File:Blankwhite.gif|Cummerbund|
+
{{CRLtemplate-nolevels|File:TS_shoulderbell.JPG|Shoulder Armor|
-
* Made out of tan or off white matte finish heavy weight cotton fabric, same as the vest.
+
*Snow Trooper style shoulder armor.
-
*Cummerbund closes in the back with 2 inch Velcro.
+
*Gloss or semi-gloss white.
-
*Should sit from just under the chest armor down to the waist.
+
*Shoulders do not have any adornment.
-
*Has a tapered crotch, made from the same material and includes a stitched inverted curve detail. It sits between the legs and connects to the back of the cummerbund with a 2 inch, white elastic strap.
+
**Optional:  Shoulders may  have the three 'double hole' stitching points as per the screen used Snow Trooper shoulder bells. Pieces are either to be sewn to the suit OR have the appearance of being sewn on.
-
*The vest Has 6 or 7 (trooper’s choice) vertical stitch lines producing 5 or 6 raised ribs of equal width, stitched into the front and centered.
+
*Shoulders may be lightly weathered.||}}
-
*There are NO front pouches on the cummerbund.||}}
+
-
{{CRLtemplate|File:TS_chest.jpg|Chest Armor|
+
{{CRLtemplate-nolevels|File:TS_gaunts.JPG|Forearm Armor|
-
* Must have painted details including several squares in the recessed area, red and gray accents on the wearers right side, and a gray square on the left side.  
+
*Snow Trooper Forearm style armor.
-
* An inveted T shaped [[Glossary#Greeblie|greeblie]] is required in the recessed area.
+
**No two forearm pieces have identical details, but can be worn on either arm.
-
* Box section must have a three button "rank bar" mounted on top, with a silver backing and two slotted screws holding it in place.  
+
*Forearm piece has complete plastic cuff.
-
* 2 shoulder straps connected to the top of the chestplate.
+
*Armor piece may be lightly weathered.||}}
-
*One white elastic strap connects the front and back armor on each of the sides.||}}
+
-
{{CRLtemplate|File:TB_scout_back.jpeg|Back Armor|
+
{{CRLtemplate-nolevels|File:TS_gloves_and_handplates.JPG|Gloves and Hand Plates|
-
*Gloss white, semi-gloss or lightly weathered.  
+
*White canvas, short style gloves.
-
*The back plate has a tank attached.
+
**Similar to Gardeners gloves.
-
*The top of the tank is flat with a detail piece painted black.
+
**Gloves do not have buttons, snaps or other adornments.
-
**The detail piece must use the same [[Glossary#Greeblie|greeblies]] as what is seen on the standard Biker Scouts.
+
*Hand armor pieces are attached to the gloves.
-
**The detail piece also includes a white painted circle and thin red line.
+
*Hand plates are mirrored designs (Both are different for each hand).
-
*The tank has a black pinstripe details.
+
**Optional: The hand plates have the four 'double hole' stitching points as per the screen used Snow Trooper hand plates. Pieces are either sewn to the gloves OR have the appearance of being sewn on.
-
*Snow Scouts may have additional "rank indicators" that are present on the right side of the tank and can number anywhere from 0 to 6 stripes.||}}
+
*Armor pieces may be lightly weathered.||}}
-
{{CRLtemplate|File:TS_shoulderbell.JPG|Shoulder Armor|
+
{{CRLtemplate-nolevels|File:TS_chest.jpg|Chest Armor|
-
* Shoulder plates have the raised boxes to the bottom.  
+
*Snow Trooper style chest armor.
-
* Shoulders plates are connected directly to the Vest.||}}
+
*Gloss or semi-gloss white.
 +
*Chest armor has detail pieces, including several squares in the recessed area, red and gray accents on the wearer’s right side, and a grey square on the left side.
 +
*An inverted, silver, T shaped greeblie is mounted in the recessed area.
 +
*Raised box section has a three button "rank bar" mounted on top, with a silver backing.
 +
*The chest armor and back plate are joined together over the shoulder with shoulder bridges consistent with the Snow Trooper.
 +
**Note: The screen used Snowtrooper shoulder straps have a brass Chicago screw / Binding Post. This piece is painted white for the Snow Scout.
 +
*The sides of the chest armor are attached to the back plate with white elastic.
 +
*Chest piece may be lightly weathered.||}}
-
{{CRLtemplate|File:TS_gaunts.JPG|Forearm Armor|
+
{{CRLtemplate-nolevels|File:TB_scout_back.jpeg|Back Armor|
-
*The Snow Scout uses Snowtrooper style forearms.
+
*Scout style back armor.
-
**Although each Snowtrooper forearm is different, placement is not consistent, therefore either forearm may be worn on either arm.  
+
*Gloss or semi-gloss white.
-
*Forearms must have an unadorned curved strap around the bottom of each wrist.||}}
+
*The back plate has a tank attached.
 +
*The top of the tank is flat with a detail piece painted black.
 +
**Detail piece includes the same greeblies as that of the standard Scout Trooper, including white painted circle and red line detail.
 +
*Tank has a black stripe detail on surface.
 +
*Tank may have additional "rank indicators" present on the right side.
 +
**These indicators can number anywhere from 0 to 6 stripes.
 +
*Armor piece may be lightly weathered.||}}
-
{{CRLtemplate|File:TS_gloves_and_handplates.JPG|Gloves and Handlplates|
+
{{CRLtemplate-onelevel|File:Blankwhite.gif|Belt|
-
*White or Off-white wrist length gloves.
+
*Gloss or semi-gloss white.
-
**Knit gardening gloves are preferred, however leather gloves are acceptable.
+
*The front section and two "boxes" of the belt are made out of plastic.
-
* Handplates are attached directly to the gloves.||}}
+
*The rest of the belt, which fastens at the back of the waist, is made from a  textile material.
 +
** 2" nylon webbing is preferable.
 +
*Hanging from the sides of the belt are hip pouches.
 +
*Pouches are made from white or off-white material (same as the standard Scout cummerbund pouches).
 +
*Pouches are connected to the belt by textile straps, with a buckle in the center of the strap.
 +
**Buckles are parachute-style and are in proportion with straps.
 +
**White buckles (or buckles covered in white material) are highly encouraged.
 +
**Black buckles are acceptable.
 +
*Armor piece may be lightly weathered.|
 +
*The plastic sections of the belt are constructed from a single piece or have the appearance of being a single piece and is attached to a nylon 50mm (2") webbing belt.
 +
*Belt is secured with a single rivet on each end.
 +
*Closure is secured at the rear with hook and loop fastener.|}}
-
{{CRLtemplate|File:Blankwhite.gif|Belt|
+
{{CRLtemplate-nolevels|File:TK_anh_stunt_detonator.jpeg|Detonator|
-
*Gloss white, semi-gloss or lightly weathered.
+
*Attached to the back of the belt is a TK style Thermal Detonator (same as the Snow Trooper).
-
*The front and two "boxes" of the belt are made of plastic.
+
*The detonator is a gray cylinder 2 to 2.5" in diameter with white end caps and a white control panel pad.
-
*The rest of the belt that fastens at the back of the waist is made from a white, 3 inch, textile material (webbing).
+
**Controls are closest to the right end cap.
-
*Hanging from the sides of the belt are hip pouches, which are the same style as used by Snowtroopers.
+
*Armor piece may be lightly weathered.||}}
-
**Pouches are tan or off-white, have a rectangular and boxy shape, with an angled closing flap.
+
-
**Pouches secure to belt through loops on the back of each pouch.
+
-
*Pouches are connected to the belt by 1.5 inch, tan or off white, textile straps. There are a total of four 1.5 inch black "parachute” clips on these straps, with one on each side of each pouch.||}}
+
-
{{CRLtemplate|File:TK_anh_stunt_detonator.jpeg|Detonator|
+
{{CRLtemplate-onelevel|File:TB_scout_knees.jpeg|Knee Armor|
-
*The detonator is a gray cylinder 2 to 2.5" in diameter with white end caps and a white control panel pad, with controls closest to the right end cap.
+
*Standard Scout style knee armor.
-
*Detonator is centered on the back of belt.||}}  
+
*Gloss or semi-gloss white.
 +
*White elastic is used to secure the armor around the leg.
 +
*Armor piece may be lightly weathered.|
 +
*Each knee piece is secured with two white elastic straps.
 +
**One, 25mm (1") piece which passes through the lower section.
 +
**One, 12mm (1/2") piece which is riveted to each side of the upper section.|}}
-
{{CRLtemplate|File:TB_scout_knees.jpeg|Knee Armor|
+
{{CRLtemplate-nolevels|File:TS_boots.jpg|Boots|
-
*Gloss white, semi-gloss or lightly weathered.
+
*Snow Trooper style Mukluks.
-
*White elastic is used to secure the armor around the leg.||}}
+
*Three 1” to 1-1/4” straps are added to the upper portion of the boots.
-
 
+
**Straps are made of a thick/heavy webbing material.
-
{{CRLtemplate|File:TS_boots.jpg|Boots|
+
**Straps are riveted or held in place with a brass/silver Chicago screw along the rear-center "spine" of the boot. (one per strap).
-
*Canadian Mukluk boots with or without the inside liner.  
+
**Straps do not sag when worn and have a distinctive gap between them.
-
*Three 1 inch straps must be added to the upper portion of the boots.
+
*Lace loops may be present or removed.
-
**Straps are attached to the back of the boot using one rivet per strap.  
+
**Note: If lace loops are present, laces are also present.
-
*Loops and metal rings must be removed.
+
*Boots may be weathered.||}}
-
*Boot laces are optional.||}}
+
{{CRLaccessories}}
{{CRLaccessories}}
-
{{CRLtemplate-onelevel|File:Blankwhite.gif|Boot Holster|
+
{{CRLtemplate-nolevels|File:Blankwhite.gif|Neck Seal|
-
*Biker Scout style boot holster attached to the mukluk.
+
*Made from white or off-white cotton fabric, matching color of vest.
-
**Gloss white, semi-gloss or lightly weathered.
+
*Horizontal rows, evenly spaced.
-
**Attached to the outside of the right boot by rivets, not straps.}}
+
*Closure is secured vertically down center of backside with hook and loop fastener.
 +
*Any excess material, on bottom of neck seal, is tucked into the flight suit.||}}
 +
 
 +
{{CRLtemplate-onelevel|File:TB_scout_pistol.jpeg|Hold-out Blaster|
 +
*Flat or semi-gloss black.
 +
*Blaster does not have any visible trigger, labels or logos.
 +
*Blaster may be lightly weathered.|
 +
*The scope has lens discs cut into the scope for a more realistic appearance.
 +
*No decals representing cross hairs or similar.|}}
{{CRLfooter|BF_CRL|T}}
{{CRLfooter|BF_CRL|T}}

Latest revision as of 03:27, 26 June 2014

crlblackhd.gif
Snow Scout
Missingprofile.jpg
Model None, Photo by None


Blizzard-Force.png

Description: Snow Scout
Prefix: TS
Detachment: Blizzard Force
Context: Star Wars.

When deployed to frozen, hostile environments, Scouts are equipped with a hybrid of cold weather armor. This armor combines the survival gear of the Snowtrooper with the needed equipment to carry out the scouting mission.
'


The 501st approval requirements are listed in black.

The Blizzard Force Detachment defines additional, optional costuming details listed in blue. Please visit the Blizzard Force web site for more details on these options.

For 501st membership only the requirements in black need to be met.


  • This CRL is a work in progress.
  • This costume may be approved by GMLs, but until the library entry is complete, it is suggested that this character first be submitted to the appropriate DL/GML peer review section of the legion forum.
  • If you have this costume and would like to assist with the completion of this library entry, please contact your detachment leader.
  • Please note that the use of the word "should" below does not indicate that the armor piece is considered open to interpretation. All instances of "should be" and "should have" will be replaced with "is" and "has", as this guide is completed.
Required Costume Components

The following costume components are present and appear as described below.

TB scout helmet.jpeg Helmet
For 501st approval:
  • Scout Style helmet
  • Helmet is gloss or semi-gloss white.
  • Licensed helmets are acceptable with modifications-
    • Remove manufacturer logos
    • Replace stock lens.
    • Replace inaccurate fish hook symbol with correct square shaped symbol.
    • Replace stock bolts and with correct flat bolt head, or real 3M bolt, painted either grey or white.
  • Fan-made helmets are acceptable as long as they remain true to shape of original screen accurate helmet.
  • Helmet may be lightly weathered.


Generic Balaclava White.jpg Balaclava
For 501st approval:
  • White balaclava worn under the helmet.
    • The balaclava is a White head sock/hood that is worn under the helmet and is used primarily to hide any view of the wearer's skin and/or facial hair.


Blankwhite.gif Flight Suit
For 501st approval:
  • The under-suit is a one or two-piece white textile suit, such as military flight-suits, motorcycle racing suits, industrial work clothing (Dickies), or similar suit modified appropriately.
  • Suit includes a off-white (oatmeal) suede or faux suede rear flap.
    • Flap is rectangle in shape
    • Attachment point is above the waist and hidden by the cummerbund.
    • The flap is slightly narrower than the width of the trooper and stops slightly higher than the bottom of the troopers behind.
  • Off-white (oatmeal) suede or faux suede thigh patches are present.
    • Patches extend over the crotch of the flight suit and down the front, finishing above the knee armor.
    • The thigh patches are secured by 50mm (2") white elastic, sewn in under the front and back of the thigh patch.
  • Flight suit does not have any visible labels, logos or zippers (including built in flight suit pockets).


Blankwhite.gif Vest
For 501st approval:
  • Vest is constructed from matte white, heavy weight cotton fabric.
  • Sleeves are padded and contain ribbing similar to the front of the cummerbund. The sleeves extend farther than the bottom edge of the shoulder armor, but end above the elbow.
  • Vest has a much wider neck opening than the flight suit.

- Secured at the back using white, 50mm (2") hook and loop fastener.


Blankwhite.gif Cummerbund
For 501st approval:
  • Cummerbund is constructed from matte white, heavy weight cotton or nylon fabric.
  • Closes in back using white, 50mm (2") hook and loop fastener.
  • Cummerbund starts just under the chest armor and extends down to the waist.
  • There is no gap between the belt and cummerbund.
  • Cummerbund has a tapered crotch area with inverted curve stitched detail.
    • This section is made from the same heavy weight cotton or nylon material. **Sits between the legs and connects to the back of the cummerbund by a 50mm (2") white elastic strap.
  • Cummerbund has 6 or 7 vertical stitch lines producing 5 or 6 raised ribs of equal width.
    • Ribs are stitched into the front, between the two fabric pouches.
  • Cummerbund may be lightly weathered.


TS shoulderbell.JPG Shoulder Armor
For 501st approval:
  • Snow Trooper style shoulder armor.
  • Gloss or semi-gloss white.
  • Shoulders do not have any adornment.
    • Optional: Shoulders may have the three 'double hole' stitching points as per the screen used Snow Trooper shoulder bells. Pieces are either to be sewn to the suit OR have the appearance of being sewn on.
  • Shoulders may be lightly weathered.


TS gaunts.JPG Forearm Armor
For 501st approval:
  • Snow Trooper Forearm style armor.
    • No two forearm pieces have identical details, but can be worn on either arm.
  • Forearm piece has complete plastic cuff.
  • Armor piece may be lightly weathered.


TS gloves and handplates.JPG Gloves and Hand Plates
For 501st approval:
  • White canvas, short style gloves.
    • Similar to Gardeners gloves.
    • Gloves do not have buttons, snaps or other adornments.
  • Hand armor pieces are attached to the gloves.
  • Hand plates are mirrored designs (Both are different for each hand).
    • Optional: The hand plates have the four 'double hole' stitching points as per the screen used Snow Trooper hand plates. Pieces are either sewn to the gloves OR have the appearance of being sewn on.
  • Armor pieces may be lightly weathered.


TS chest.jpg Chest Armor
For 501st approval:
  • Snow Trooper style chest armor.
  • Gloss or semi-gloss white.
  • Chest armor has detail pieces, including several squares in the recessed area, red and gray accents on the wearer’s right side, and a grey square on the left side.
  • An inverted, silver, T shaped greeblie is mounted in the recessed area.
  • Raised box section has a three button "rank bar" mounted on top, with a silver backing.
  • The chest armor and back plate are joined together over the shoulder with shoulder bridges consistent with the Snow Trooper.
    • Note: The screen used Snowtrooper shoulder straps have a brass Chicago screw / Binding Post. This piece is painted white for the Snow Scout.
  • The sides of the chest armor are attached to the back plate with white elastic.
  • Chest piece may be lightly weathered.


TB scout back.jpeg Back Armor
For 501st approval:
  • Scout style back armor.
  • Gloss or semi-gloss white.
  • The back plate has a tank attached.
  • The top of the tank is flat with a detail piece painted black.
    • Detail piece includes the same greeblies as that of the standard Scout Trooper, including white painted circle and red line detail.
  • Tank has a black stripe detail on surface.
  • Tank may have additional "rank indicators" present on the right side.
    • These indicators can number anywhere from 0 to 6 stripes.
  • Armor piece may be lightly weathered.


Blankwhite.gif Belt
For 501st approval:
  • Gloss or semi-gloss white.
  • The front section and two "boxes" of the belt are made out of plastic.
  • The rest of the belt, which fastens at the back of the waist, is made from a textile material.
    • 2" nylon webbing is preferable.
  • Hanging from the sides of the belt are hip pouches.
  • Pouches are made from white or off-white material (same as the standard Scout cummerbund pouches).
  • Pouches are connected to the belt by textile straps, with a buckle in the center of the strap.
    • Buckles are parachute-style and are in proportion with straps.
    • White buckles (or buckles covered in white material) are highly encouraged.
    • Black buckles are acceptable.
  • Armor piece may be lightly weathered.
For level two certification (if applicable):
  • The plastic sections of the belt are constructed from a single piece or have the appearance of being a single piece and is attached to a nylon 50mm (2") webbing belt.
  • Belt is secured with a single rivet on each end.
  • Closure is secured at the rear with hook and loop fastener.
TK anh stunt detonator.jpeg Detonator
For 501st approval:
  • Attached to the back of the belt is a TK style Thermal Detonator (same as the Snow Trooper).
  • The detonator is a gray cylinder 2 to 2.5" in diameter with white end caps and a white control panel pad.
    • Controls are closest to the right end cap.
  • Armor piece may be lightly weathered.


TB scout knees.jpeg Knee Armor
For 501st approval:
  • Standard Scout style knee armor.
  • Gloss or semi-gloss white.
  • White elastic is used to secure the armor around the leg.
  • Armor piece may be lightly weathered.
For level two certification (if applicable):
  • Each knee piece is secured with two white elastic straps.
    • One, 25mm (1") piece which passes through the lower section.
    • One, 12mm (1/2") piece which is riveted to each side of the upper section.
TS boots.jpg Boots
For 501st approval:
  • Snow Trooper style Mukluks.
  • Three 1” to 1-1/4” straps are added to the upper portion of the boots.
    • Straps are made of a thick/heavy webbing material.
    • Straps are riveted or held in place with a brass/silver Chicago screw along the rear-center "spine" of the boot. (one per strap).
    • Straps do not sag when worn and have a distinctive gap between them.
  • Lace loops may be present or removed.
    • Note: If lace loops are present, laces are also present.
  • Boots may be weathered.


Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present must meet the guidelines below.

Blankwhite.gif Neck Seal
For 501st approval:
  • Made from white or off-white cotton fabric, matching color of vest.
  • Horizontal rows, evenly spaced.
  • Closure is secured vertically down center of backside with hook and loop fastener.
  • Any excess material, on bottom of neck seal, is tucked into the flight suit.


TB scout pistol.jpeg Hold-out Blaster
For 501st approval:
  • Flat or semi-gloss black.
  • Blaster does not have any visible trigger, labels or logos.
  • Blaster may be lightly weathered.
For level two certification (if applicable):
  • The scope has lens discs cut into the scope for a more realistic appearance.
  • No decals representing cross hairs or similar.

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:TS_Snow_Scout

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.