(Difference between revisions)
(Created page with "{{CRLheader|Stormtrooper Commander|File:Missingprofile.jpg|MODEL NAME|PHOTOGRAPHER NAME}} {{CRLdetinfo|1116|Stormtrooper Commander (TKC) |TK|The Force Unleashed| The Stormtroop...")
Line 6: Line 6:
}}
}}
-
{{CRLfisdlevels}}
+
{{CRLfisdlevels_fr}}
{{CRLwiplmoapproval}}
{{CRLwiplmoapproval}}
-
{{CRLtemplate|File:TK Commander Helmet.jpg|Helmet|
+
{{CRLtemplate|File:TK Commander Helmet.jpg|Casque|
-
*Traps (trapezoids on dome of helmet) and tears (area beneath the corners of eye lenses) are gray.
+
*White fiberglass, ABS (Acrylonitrile Butadiene Styrene), or HIPS (High Impact Polystyrene).
-
*Rear traps and tears have vertical black lines.  
+
*Traps (trapezes sur le dôme) et tears (zones à proximité des yeux) sont gris.
-
*Lenses are flat material, green in color, sufficiently dark enough to obscure the costumer's eyes.
+
*Rear traps and tears ont des lignes verticales noire.
-
*The “ear” bars have three or four bumps and should be gray or painted gray, with a black outline. Painting the bumps with rank stripes (highlighted) in black is optional.
+
*Lentilles sont d'un vert suffisament sombre pour obscurcir les yeux des costumés
-
*Ears shall have a black horizontal anchor-like detail on each side of the ear bar.  
+
*Gray "ear" bars ont 3 ou 4 bosses, avec 1 ligne de contour noire . les bosses peuvent ou pas etre peintes
*Frown is painted gray and does not leave the teeth area. Eight total teeth on the frown are cut out.
*Frown is painted gray and does not leave the teeth area. Eight total teeth on the frown are cut out.
-
*Tube stripes are medium blue, numbering between 9 and 16 per side with the curve bends extending backwards.
+
*Tube stripes sont en bleu medium, au nombre de 9 à 15 de chaque côté avec la courbe de virages s'étendant vers l'arrière.
-
*Vocoder (vertically ribbed chin detail) is painted black.
+
*Vocoder (striés détail menton) est peint en noir
-
*Aerators/Hovi mix tips (cylinders on either side of the vocoder) are black or painted black.
+
*Aérateurs (cylindres de chaque côté du vocodeur) sont noirs
-
*Tears, traps, and tube stripes may be hand painted, decals, or decals that replicate hand painted.
+
*Tears, traps, and tube stripes peut être peint à la main, décalcomanies, décalcomanies qui reproduisent peinture à la main.
-
*Blue stripe detail shall be present on the right side of the helmet, starting from the back of the helmet, and continued on to the bottom of the face (stripe tapers to a point as it goes down the face).
+
*Un motif bleu doit être présent sur la droite du casque, démarrant de l'arrière du casque, et continuant sur le bas du visage.
-
*Mesh may be used behind the frown to obscure the face of the wearer.
+
*Les oreilles ont deux "ancres noires" horizontales.
-
*Note: The FX helmet is considered deprecated (to be avoided), though is acceptable for Legion requirements.|
+
*Note: Les casques FX sont considéré dépréciés mais toujours validables.|
-
*Ears shall have three screws per side, one above and one below the ear bar and one at the base of the helmet.
+
*Les oreilles ont 3 vis plates par côté : une au dessus de la barre grise, une en dessous et une à la base du casque.
-
*Ear bars should have four bumps only, not three.
+
*Les bars d'oreilles doivent avoir 4 bosses et pas 3.
-
*Traps/tears and tube stripes shall have the correct ANH TK details
+
*Traps/tears et tube stripes (tout ce qui concerne les motifs "classiques") doivent avoir les même details que ceux d'un ANH.
-
*Correct 'Hovi mic' aerator tips.  
+
*'Hovi mic' Corrects (les aérateurs noirs qui vont dans les trous de devant à la base du casque).
-
*FX helmets are not allowed.
+
*Casques FX non autorisés.
-
*Helmet and details/paint should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).|
+
*La pièce doit être légèrement vieillie (battle damaged), pas salie comme un sandtrooper.|
-
*MRCE and/or EFX PCR helmets are not allowed.
+
*MRCE et EFX PCR non autorisés.
-
*ANHv2 helmets are not allowed.
+
*ANHv2 idem.
-
*Ear bars shall have only one or two bumps painted in black (rank stripes).
+
*Les barres d'oreilles doivent avoir une voire 2 bosses peintes en noir (grade).
-
*Neck trim shall be of an s-type profile rather than a u-type profile.
+
*Le joint du cou doit être en S et non en U.
-
*Tears/traps shall be hand painted or use decals that emulate hand painted (with correct ANH TK details). }}
+
*Tears/traps doivent être peintes à la main ou utiliser des autocollants pour imiter (avec détails ANH). }}
-
{{CRLtemplate|File:TK_anh_stunt_neckseal.jpeg|Neck Seal|
+
{{CRLtemplate|File:TK_anh_stunt_neckseal.jpeg|Tour de Cou|
-
*Black with horizontal ribs, fitted to the wearer, and extending from the base of the neck to the top of the Adam's apple.| | }}
+
*Noir avec bourrelets horizontaux, doit aller parfaitement au porter, ne pas flotter ou autre. Doit être bien ajusté.| | }}
{{CRLtemplate|File:TK Commander Straps.jpg|Shoulder Straps|
{{CRLtemplate|File:TK Commander Straps.jpg|Shoulder Straps|
-
*These shall be securely mounted in front and may free float in back. They may be affixed with rivets, Velcro, or adhesive.|
+
*Doivent être bien fixés sur le devant et libres à l'arrière. Peuvent être fixés par des rivets, du velcro ou de l'adhésif.|
-
*No visible rivets are allowed.
+
*Pas de rivet visible.
-
*Shoulder straps shall not have a flat end at the ends of them. They shall be ribbed 100%.
+
*Doivent être complètement maintenus et 100% striés.
-
*Shoulder straps should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).|
+
*La pièce doit être légèrement vieillie (battle damaged), pas salie comme un sandtrooper.|
-
*These shall be affixed in the front (no snaps, rivets or brads shall be visible).
+
*Fixés à l'avant et à l'arriere, sans système de rivet ou de bouton visible.}}
-
*These shall be affixed in the back (no snaps, rivets or brads shall be visible).}}
+
-
{{CRLtemplate|File:TK Commander Shoulders.jpg|Shoulder Bells|
+
{{CRLtemplate|File:TK Commander Shoulders.jpg|Epaulettes|
-
*One on each shoulder. The shoulder bells are considered effectively symmetrical; they may be worn interchangeably on the left and right shoulders.
+
*Une à chaque épaule. Elles sont symétriques donc théoriquement interchangeables.
-
*The entire shoulder bell shall be blue. |
+
*Entièrement bleues. |
-
*Shoulder bells are rounded at the corners.
+
*Sont arrondis aux angles.
-
*No shoulder bell straps across the biceps.
+
*Pas de système de maintien de l'épaulette passant sur le biceps.
-
*Shoulder bells/blue Commander details should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).|}}
+
*La pièce doit être légèrement vieillie (battle damaged), pas salie comme un sandtrooper.|}}
{{CRLtemplate|File:TK Commander Biceps.jpg|Biceps|
{{CRLtemplate|File:TK Commander Biceps.jpg|Biceps|
-
*Biceps are fully closed.  
+
*Bien fermés.
-
*Two blue vertical stripes shall be present on both biceps (one to the front and one on the side).|
+
*2 bandes bleues : une à l'avant et une sur le coté|
-
*No shoulder bell straps across the biceps.
+
*Aucune bande de maintien d'épaulette ne doit passer dessus.
-
*Biceps/blue Commander details should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).   |}}
+
*La pièce et les détails de couleur doivent être légèrement vieillis (battle damaged), pas salis comme un sandtrooper.|}}
-
{{CRLtemplate|File:TK Commander Forearms.jpg|Forearms|
+
{{CRLtemplate|File:TK Commander Forearms.jpg|Avant-bras|
-
*Forearms are fully closed.  
+
*Bien fermés.
-
*Two blue vertical stripes shall be present on both Forearms (one to the front and one on the side). |
+
*2 bandes bleues : une à l'avant et une sur le coté |
-
*Forearms/blue Commander details should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
+
*La pièce et les détails de couleur doivent être légèrement vieillis (battle damaged), pas salis comme un sandtrooper.|
-
*No return edge on the inside of the front of the forearm is allowed.}}
+
*Pas de bord retourné sur l'intérieur avant.}}
-
{{CRLtemplate|File:TK_anh_stunt_handplates.jpeg|Hand Plates|
+
{{CRLtemplate|File:TK_anh_stunt_handplates.jpeg|Plaques des mains|
-
*Roughly pentagonal in shape, the hand plates are mounted securely over the back of the glove. As an alternative to plastic, these may be made out of latex or latex-like material.|
+
*Plastic ou latex, pentagonales (type ANH).|
-
*Hand plates should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD). |
+
*La pièce doit être légèrement vieillie (battle damaged), pas salie comme un sandtrooper. |
-
*Hand guards shall be latex or latex-like, painted white, affixed to rubber gloves in lieu of plastic hand guards.}}
+
*Doivent être en latex ou en matière immitant le latex, paintes en blanc et fixées à des gants en caoutchouc.}}
-
{{CRLtemplate|File:TK_anh_stunt_gloves.jpeg|Gloves|
+
{{CRLtemplate|File:TK_anh_stunt_gloves.jpeg|Gants|
-
*Black in color, made of either rubber, nomex, leather, or leather-like material, with no visible straps or logos/designs. The fingers are enclosed, non-textured.| |
+
*Noirs, non texturés, en tissus, cuire ou simili, ou caoutchouc.| |
-
*Gloves shall be rubber or rubber like chemical gloves in black.}}
+
*Noir et en caoutchouc type mappa ou chimie.}}
{{CRLtemplate|File:TK_Commander_Chest.jpg|Chest|
{{CRLtemplate|File:TK_Commander_Chest.jpg|Chest|

Revision as of 03:02, 3 September 2011

crlblackhd.gif
Stormtrooper Commander
Missingprofile.jpg
Model MODEL NAME, Photo by PHOTOGRAPHER NAME


FISD.png

Description: Stormtrooper Commander (TKC)
Prefix: TK
Detachment: First Imperial Stormtrooper Detachment
Context: The Force Unleashed

The Stormtrooper Commanders patrol hostile battlefields, leading their troops into fierce combat on dangerous worlds such as the fungus planet Felucia. With razor-sharp minds and steely resolve, these highly trained Imperial soldiers continue the reputation established by the Clone Wars’ fearsome ARC troopers. Clearly visible in their uniquely detailed armor, the Commanders confront enemies such as the savage Felucians with deadly heavy blaster cannons equipped with a devastating stun setting. They are rewarded for their loyalty with specialized armor fitted with an internal shield generator capable of deflecting nearly any attack, with the exeception of a lightsaber. Most importantly, the Stormtrooper Commanders are entrusted with command over the Empire’s elite Shadow Troopers, with authority to call in reinforcements and trigger ambushes without clearance from Imperial high command. Stormtrooper Commanders typically hang back and stun the most threatening enemy, who is then overwhelmed by Shadow Troopers.


Les exigences pour l’approbation par la 501st sont listées en noires .

Le FISD définie deux, additionnels et optionnels, niveaux d’excellence de costume : Expert Infantryman (EIB) et Centurion. Sur la page ci-dessous, les exigences pour l’Expert Infantryman sont listées en bleues. Les exigences Centurion sont en rouges. Prière de visiter le web-site du FISD pour une description complète de ces standards.

Pour une adhésion à la 501st, uniquement les exigences en noires doivent être remplies.

Notes Spéciales :

  • Visitez la Page des Page des questions fréquemment posées pour avoir des informations sur le Costume de Stormtrooper Suprême provenant de chez Rubies.
  • Les Blasters ne sont pas requis pour l’adhésion à la légion en regard de notre politique d'armement.
  • Les parties d’armures doivent être faites de l’un de ces types de matériau ou analogues : Fibre de verre blanche, ABS (Acrylonitrile Butadiene Styrene), ou HIPS (High Impact Polystyrene).
  • Les armures FX ne sont pas autorisées pour une certification de niveau 3.

  • This CRL is a work in progress.
  • As such, this costume must be approved by the Legion Membership Officer, via the appropriate section of the Legion forum.
  • If you have this costume and would like to assist with the completion of this library entry, please contact your detachment leader.
  • Please note that the use of the word "should" below does not indicate that the armor piece is considered open to interpretation. All instances of "should be" and "should have" will be replaced with "is" and "has", as this guide is completed.

TK Commander Helmet.jpg Casque
For 501st approval:
  • White fiberglass, ABS (Acrylonitrile Butadiene Styrene), or HIPS (High Impact Polystyrene).
  • Traps (trapezes sur le dôme) et tears (zones à proximité des yeux) sont gris.
  • Rear traps and tears ont des lignes verticales noire.
  • Lentilles sont d'un vert suffisament sombre pour obscurcir les yeux des costumés
  • Gray "ear" bars ont 3 ou 4 bosses, avec 1 ligne de contour noire . les bosses peuvent ou pas etre peintes
  • Frown is painted gray and does not leave the teeth area. Eight total teeth on the frown are cut out.
  • Tube stripes sont en bleu medium, au nombre de 9 à 15 de chaque côté avec la courbe de virages s'étendant vers l'arrière.
  • Vocoder (striés détail menton) est peint en noir
  • Aérateurs (cylindres de chaque côté du vocodeur) sont noirs
  • Tears, traps, and tube stripes peut être peint à la main, décalcomanies, décalcomanies qui reproduisent peinture à la main.
  • Un motif bleu doit être présent sur la droite du casque, démarrant de l'arrière du casque, et continuant sur le bas du visage.
  • Les oreilles ont deux "ancres noires" horizontales.
  • Note: Les casques FX sont considéré dépréciés mais toujours validables.
For level two certification (if applicable):
  • Les oreilles ont 3 vis plates par côté : une au dessus de la barre grise, une en dessous et une à la base du casque.
  • Les bars d'oreilles doivent avoir 4 bosses et pas 3.
  • Traps/tears et tube stripes (tout ce qui concerne les motifs "classiques") doivent avoir les même details que ceux d'un ANH.
  • 'Hovi mic' Corrects (les aérateurs noirs qui vont dans les trous de devant à la base du casque).
  • Casques FX non autorisés.
  • La pièce doit être légèrement vieillie (battle damaged), pas salie comme un sandtrooper.
For level three certification (if applicable):
  • MRCE et EFX PCR non autorisés.
  • ANHv2 idem.
  • Les barres d'oreilles doivent avoir une voire 2 bosses peintes en noir (grade).
  • Le joint du cou doit être en S et non en U.
  • Tears/traps doivent être peintes à la main ou utiliser des autocollants pour imiter (avec détails ANH).
TK anh stunt neckseal.jpeg Tour de Cou
For 501st approval:
  • Noir avec bourrelets horizontaux, doit aller parfaitement au porter, ne pas flotter ou autre. Doit être bien ajusté.
For level two certification (if applicable):
For level three certification (if applicable):
TK Commander Straps.jpg Shoulder Straps
For 501st approval:
  • Doivent être bien fixés sur le devant et libres à l'arrière. Peuvent être fixés par des rivets, du velcro ou de l'adhésif.
For level two certification (if applicable):
  • Pas de rivet visible.
  • Doivent être complètement maintenus et 100% striés.
  • La pièce doit être légèrement vieillie (battle damaged), pas salie comme un sandtrooper.
For level three certification (if applicable):
  • Fixés à l'avant et à l'arriere, sans système de rivet ou de bouton visible.
TK Commander Shoulders.jpg Epaulettes
For 501st approval:
  • Une à chaque épaule. Elles sont symétriques donc théoriquement interchangeables.
  • Entièrement bleues.
For level two certification (if applicable):
  • Sont arrondis aux angles.
  • Pas de système de maintien de l'épaulette passant sur le biceps.
  • La pièce doit être légèrement vieillie (battle damaged), pas salie comme un sandtrooper.
For level three certification (if applicable):


TK Commander Biceps.jpg Biceps
For 501st approval:
  • Bien fermés.
  • 2 bandes bleues : une à l'avant et une sur le coté
For level two certification (if applicable):
  • Aucune bande de maintien d'épaulette ne doit passer dessus.
  • La pièce et les détails de couleur doivent être légèrement vieillis (battle damaged), pas salis comme un sandtrooper.
For level three certification (if applicable):
TK Commander Forearms.jpg Avant-bras
For 501st approval:
  • Bien fermés.
  • 2 bandes bleues : une à l'avant et une sur le coté
For level two certification (if applicable):
  • La pièce et les détails de couleur doivent être légèrement vieillis (battle damaged), pas salis comme un sandtrooper.
For level three certification (if applicable):
  • Pas de bord retourné sur l'intérieur avant.


TK anh stunt handplates.jpeg Plaques des mains
For 501st approval:
  • Plastic ou latex, pentagonales (type ANH).
For level two certification (if applicable):
  • La pièce doit être légèrement vieillie (battle damaged), pas salie comme un sandtrooper.
For level three certification (if applicable):
  • Doivent être en latex ou en matière immitant le latex, paintes en blanc et fixées à des gants en caoutchouc.
TK anh stunt gloves.jpeg Gants
For 501st approval:
  • Noirs, non texturés, en tissus, cuire ou simili, ou caoutchouc.
For level two certification (if applicable):
For level three certification (if applicable):
  • Noir et en caoutchouc type mappa ou chimie.
TK Commander Chest.jpg Chest
For 501st approval:
  • Chest plate overlaps the abdominal plate.
  • A blue detail shall be present in the form of a Y-Shape. The blue Y-Shaped detail will have slanted white stripes, one on each side of the flared upper parts of the Y-shape.
For level two certification (if applicable):
  • A white flexible U shaped gasket or molded lip shall be present around all edges, bottom, both sides and neck area.
  • Chest/blue Commander details should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).
For level three certification (if applicable):
  • Fabric or elastic strip connecting chest to back shall be either black or not present.
TK Commander Back.jpg Back
For 501st approval:
  • Back plate contains a "O II" design.
  • A blue detail shall be present in the form of a Y-Shape. The blue Y-Shaped detail will have slanted white stripes, one on each side of the flared upper parts of the Y-shape.
For level two certification (if applicable):
  • A white flexible U shaped gasket or molded lip shall be present around all edges, bottom, both sides and neck area.
  • The Back plate/blue Commander details should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).
For level three certification (if applicable):
  • Back plate shall have no, or minimal overlap of the kidney plate.
TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos/designs.
For level two certification (if applicable):
For level three certification (if applicable):
TK Commander Ab.jpg Abdomen Plate
For 501st approval:
  • The ab plate has a button area that matches the color pattern shown (3 dark blue + 6 black or all black); buttons are approximately 7/16" in diameter.
  • A blue stripe shall be present on the ab section and stops underneath the belt area. The blue stripe is wide at the bottom and narrows toward the top, to match up to the blue Y-Shaped detail of the chest plate.
For level two certification (if applicable):
  • The three dark blue buttons will be the three buttons closest to the belt.
  • A white flexible U shaped gasket or molded lip shall be present around all edges.
  • Ab plate button detail shall be inverted compared to ANH/ESB.
  • Ab plate/blue Commander details should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).
For level three certification (if applicable):
  • Ab plate buttons shall be all black.
  • There shall be no split rivet or brad visible on the crotch tab of the ab plate.
  • Left vertical row of ab plate buttons should contain five buttons. All buttons shall be of the same size and color and shall be visible (not covered by the belt). The fifth button shall be mounted vertically above the standard four buttons.
TK Commander Butt.jpg Kidney & Butt Plate
For 501st approval:
  • It is allowable to have a separate kidney/butt plate for 501st requirements. If a separate kidney plate is used, it shall line up with the ab plate, with the top of the kidney plate being flush to or under the back plate.If a separate butt plate is used, it should be below the bottom of belt and line up with the kidney plate, with minimal gap between it and the kidney plate.
  • The crotch tab of the butt plate area may or may not have visible snaps.
For level two certification (if applicable):
  • A separate kidney/butt plate is not allowed - the kidney and butt plate shall be combined/fused to a single plate/one piece.
  • A white flexible U shaped gasket or molded lip shall be present around all edges.
  • The edges of the hip area should be rounded/curved (not like the straight lines found on the ANH/ESB butt plate).
  • Kidney/Butt plate should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).
For level three certification (if applicable):
  • There shall be no visible side rivets on the kidney plate, unlike ANH/ESB suits.
  • There shall be no visible snaps, rivets or brads on the crotch tab of the butt plate tab.
TKC INC 1.jpg Belt
For 501st approval:
  • Belt face is made of plastic (TK ammo belt).
  • Belt proper is made of canvas, canvas covered material, leather, or vinyl, 2.25” to 3.5” wide. The color is be white to off-white.
  • The drop boxes dangle from the sides of the front plastic belt (ammo belt) via white straps and are aligned under the plastic tabs of the ammo belt.
  • The drop boxes shall be painted gray and dangle from the sides of the plastic front belt (ammo belt) via white straps and are aligned under the plastic tabs of the ammo belt..
For level two certification (if applicable):
  • Belt shall be a tightly woven nylon/cordura style material, or may be canvas or canvas covered, and the color is be white to off-white. The belt material should be lightly aged,(battle worn), but not weathered like a Sandtrooper (TD). Leather and vinyl are not acceptable.
  • Belt shall be between 2.25" and 2.5" wide, not 3" as in ANH/ESB.
  • There shall be two square buttons, one on each end of the plastic ammo belt. The center square button is not allowed.
  • Belt face(TK ammo belt)and drop boxes should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).
For level three certification (if applicable):
  • The corners of the plastic ammo belt shall be trimmed at a 45 degree angle.
  • Drop boxes are closed in the back.
  • The belt proper shall have (eight total) white rivets. Two rivets close to each side of the thermal detonator, and two rivets approximately an inch away from the edge of the ammo belt (The rivets should form a rectangular pattern).
TK anh stunt detonator.jpeg Thermal Detonator
For 501st approval:
  • (a.k.a. O2 canister) attaches to the back of the belt. This is a gray cylinder between 2" and 2.5" in diameter with white end caps and a white control panel pad, with controls closest to the right end cap.
For level two certification (if applicable):
  • The thermal detonator needs to be attached via metal clips approximately 1 inch wide, and shall be all gray without silver stickers or silver paint.
  • The thermal detonator should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).
For level three certification (if applicable):
  • The thermal detonator control panel shall have correct ROTJ details, not ANH/ESB.
TK Commander Thighs.jpg Thighs
For 501st approval:
  • Thigh armor shall be closed in the back.
  • The ammo belt shall be installed on the bottom of the right thigh.
  • The outside half of the right thigh shall be blue with two white semi-horizontal stripes near the top.
For level two certification (if applicable):
  • Thighs/blue Commander details should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).
For level three certification (if applicable):
  • The thigh ammo belt shall be connected by brads/split rivets only - standard rivets are not acceptable.
  • The bottom corners of the thigh ammo belt shall be rounded off.
TK Commander Shins.jpg Lower Legs
For 501st approval:
  • Greaves close in the back. The trapezoid knee plate (sniper knee plate) is affixed to the left greave and may have two visible brads or rivets securing it to the greave.
  • Only the outside half of the right greave shall be blue.
For level two certification (if applicable):
  • Greaves/blue Commander details should be lightly scuffed,(battle worn), but not weathered like a Sandtrooper (TD).
For level three certification (if applicable):


150px Boots
For 501st approval:
  • White leather or leather-like, above ankle height, with a flat sole with a short heel, and small U-shaped elastic sections on both sides of the ankle with no buckles or laces. Jodhpur/Chelsea-type boots or an equivalent style is acceptable. Elvis or Mariachi boots are not allowed.
  • Both boots shall have two blue stripes painted, curving across the top of the foot.
For level two certification (if applicable):
For level three certification (if applicable):
  • There shall be no seam on the front of the boot (e.g. CABoots are not allowed).
  • Boots shall be lightly scuffed.
TK anh stunt holster.jpeg Holster
For 501st approval:
  • Made of black leather or leather-like material.
For level two certification (if applicable):
  • Holster shall be worn on the left and be attached to the belt from behind instead of front, with no loops covering the outside of the belt.
  • The holster will be affixed with two fasteners at the bottom of the belt instead of none or four. These may be rivets, snaps, or Chicago screws.
For level three certification (if applicable):
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present must meet the guidelines below.

TK esb blaster1.jpeg BlasTech E-11 (ESB style)
For 501st approval:
  • Based on a real or replica Sterling sub-machine gun, scratch-built, or a modified commercial toy Stormtrooper blaster.
For level two certification (if applicable):
  • Folding stock (does not need to function).
  • No ammo counter shall be present.
  • D-ring mounted on the rear.
  • Correct style scope.
  • No power cylinders on the magazine housing.
  • Scratch-built, resin cast, Hyperfirm rubber cast blasters shall have a total of 6 T-tracks on blaster (leaving the lowest row on the magazine housing side uncovered).
  • If using the Hasbro E11 toy blaster and you cover all the rows of holes, the blaster will have 7 T-tracks total. But, if you want to have the correct number of T-tracks (6 total) with the lower row of open vent holes on the magazine housing side, then you shall cover the pre-existing rows of holes with T-tracks, and grind off the lower integrated T-track on the magazine housing side and drill a new row of holes in its place.
For level three certification (if applicable):
  • Hasbro blasters are not allowed, even conversions.


TK rotj e11.jpg BlasTech E-11 (ROTJ Style)
For 501st approval:
  • Based on a real or replica Sterling sub-machine gun, scratch-built, or a modified commercial toy Stormtrooper blaster.
For level two certification (if applicable):
  • Folding stock (does not need to function).
  • No ammo counter shall be present.
  • D-ring mounted on the rear.
  • Correct style scope.
  • No power cylinders on the magazine housing.
  • Scratch-built, resin cast, Hyperfirm rubber cast blasters shall have a total of 7 U shaped channels on blaster (all holes on barrel shall be covered).
  • If using the popular commercially available Stormtrooper blasters, you shall grind off the T-tracks and replace them with U shaped channels and cover the open rows of holes (total of 7 U shaped channels in all).
  • Correct greeblies on the left rear area shall be present (door catch and two "hammers").
For level three certification (if applicable):
  • Hasbro blasters are not allowed, even conversions.


Tk anh hero se14r.jpg BlasTech SE-14R
For 501st approval:
  • The SE-14R blaster may be carried. It shall have a correct scope if carried in lieu of the E-11 for informal events.
For level two certification (if applicable):
For level three certification (if applicable):
1XX 17.jpg Lightsaber (The Force Unleashed)
For 501st approval:
  • The hilt should be Graflex style or have the characteristics of the Graflex, (reference Luke Skywalker's lightsaber from ANH and ESB). If the lightsaber has a blade, it may be one of the color blades used in the video game, The Force Unleashed. The choice of blade colors are: Black, Blue, Green, Gold, Purple, Red and Yellow.
  • Note: Double blades, small Yoda style lightsaber, or inexpensive non-FX Hasbro Lightsaber toys are not allowed.
For level two certification (if applicable):
For level three certification (if applicable):
  • The hilt shall be made to reference Starkiller's lightsaber (as seen in The Force Unleashed). If the lightsaber has a blade, it may be one of the color blades used in the video game, The Force Unleashed. The choice of blade colors are: Black, Blue, Green, Gold, Purple, Red and Yellow.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.