(Difference between revisions)
 
(16 intermediate revisions not shown)
Line 1: Line 1:
{{CRLheader|Sandtrooper|File:TD_sandtrooper_full.jpeg|TD-8800|Juan Arvizu}}
{{CRLheader|Sandtrooper|File:TD_sandtrooper_full.jpeg|TD-8800|Juan Arvizu}}
-
<!-- PAGE BREAK -->
+
{{CRLdetinfo| 1104 |Sandtrooper|TD|Star Wars Episode IV: A New Hope|
-
{{CRLdetinfo| 1104 |Sandtrooper|TD|Star Wars Episode IV: A New Hope|The sandtrooper is a desert terrain stormtrooper equipped with modified armor and gear to better withstand missions in harsh arid environments. While their armor is superficially similar to that of the standard stormtrooper, advanced cooling systems in both their helmets and suits offer these troopers protection from the relentless heat.}}
+
The Sandtrooper is a desert terrain Stormtrooper equipped with modified armor and gear to better withstand missions in harsh arid environments. While their armor is superficially similar to that of the standard Stormtrooper, advanced cooling systems in both their helmets and suits offer these troopers protection from the relentless heat.}}
{{CRLmepdlevels}}
{{CRLmepdlevels}}
{{CRLgmlapproval}}
{{CRLgmlapproval}}
-
 
-
<!-- PAGE BREAK -->
 
{{CRLrequirements}}
{{CRLrequirements}}
{{CRLtemplate|File:TD_sandtrooper_helmet.jpeg|Helmet|
{{CRLtemplate|File:TD_sandtrooper_helmet.jpeg|Helmet|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*Frown is painted gray and does not leave the teeth area. Between Six and Eight total teeth on the frown cut out.
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
 +
*Frown is painted gray and does not leave the teeth area.
 +
*Between six and eight total teeth on the frown cut out.
*Traps and tears are gray.
*Traps and tears are gray.
*No vertical black lines in any traps or tears.
*No vertical black lines in any traps or tears.
-
*Medium blue tube stripes numbering between 9 and 16 per side (there does not need to be an equal amount per side). The curve bends backwards. Navy blue and black stripes are not acceptable.
+
*Medium blue, backward bent tube stripes number between (9) and (16) per side.
-
*Lenses are flat green or smoke. They are dark enough that viewers cannot see the eyes behind them.
+
**Navy blue and/ or black stripes are inaccurate.
 +
**Does not need to be an equal amount of stripes per side.
 +
*Lenses are flat green or smoke.
 +
**Lenses are dark enough that viewers cannot see the wearers eyes behind them.
*Chin vocoder is painted black.
*Chin vocoder is painted black.
-
*The ears have four raised bumps, painted gray in color with a black outline.  One bump must be painted black.  
+
*The ears have four raised bumps, painted gray in color with a black outline.  **One bump is painted black.
*Two aerators (a.k.a. "microphone tips") are present.|
*Two aerators (a.k.a. "microphone tips") are present.|
-
*Lenses must be flat green.
+
*Lenses are flat green.
-
*Four "teeth" cut out on either side of helmet "frown".
+
*Four "teeth" cut out on either side of the helmet "frown".
*Correct Hovi-Mix mic tips.
*Correct Hovi-Mix mic tips.
*FX helmets are not allowed.|
*FX helmets are not allowed.|
-
* FX, MRCE and/or ANHv2 helmets are not allowed.
+
*FX, MRCE and/or ANHv2 helmets are not allowed.}}
-
}}
+
 +
{{CRL_generic_tk_neckseal}}
-
{{CRLtemplate|File:TK_anh_stunt_neckseal.jpeg|Neck Seal|
+
{{CRLtemplate-nolevels|File:TD_sandtrooper_pouches.jpeg|Ammo Pouches|
-
*Black with horizontal ribs, fitted to the wearer, and extending from the base of the neck to the top of the Adam's apple.| | }}
+
*All Sandtrooper armor parts are weathered.
 +
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
 +
*Black in color, made of canvas, leather or leather-like German MP-40 style ammo pouches.
 +
*The standard configuration calls for a minimum of two pouches:
 +
**one pouch on the left shoulder and one on the right hip.
 +
**A third worn on the opposite hip is allowed.
 +
*Option: If choosing to replicate a screen used configuration of equipment, the number of pouches may be altered.
 +
**See the [[Costuming:TD_sandtrooper_mepd_SWAT|MEPD SWAT]] page for more details.
 +
**Note: Screen used configurations also include specific color Pauldrons and individual backpacks styles.||}}
-
{{CRLtemplate|File:TD_sandtrooper_pouches.jpeg|Ammo Pouches|
+
{{CRLtemplate-nolevels|File:TD_sandtrooper_pauldron.jpeg|Pauldron|  
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*Black in color, made of canvas, leather or leather-like German MP-40 style ammo pouches. There shall be two minimum : one pouch on the left shoulder and one on the right hip. A third worn on the opposite hip is allowed.| |
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
* For MEPD SWAT clearance the pauldron, pouches and backpack must match a screen used configuration. See the [[Costuming:TD_sandtrooper_mepd_SWAT|MEPD SWAT]] page for more details.  
+
*A black, orange, or white neck ornament made of leather or a leather-like material, worn over the right shoulder.
-
}}
+
*Option: If choosing to replicate a screen used configuration of equipment, specific colored Pauldrons are required.
 +
**See the [[Costuming:TD_sandtrooper_mepd_SWAT|MEPD SWAT]] page for more details.
 +
**Note: Screen used configurations also include differences in the number of pouches and individual backpacks styles.||}}
-
{{CRLtemplate|File:TD_sandtrooper_pauldron.jpeg|Pauldron|  
+
{{CRLtemplate-onelevel|File:TD_sandtrooper_straps.jpeg|Shoulder Straps|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*A black, orange, or white neck ornament made of leather or a leather-like material, worn over the right shoulder.| |
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
* For MEPD SWAT clearance the pauldron, pouches and backpack must match a screen used configuration. See the [[Costuming:TD_sandtrooper_mepd_SWAT|MEPD SWAT]] page for more details.
+
*Sandtrooper Chest and Back Armor are attached from within via soft straps.
-
}}
+
**For basic approval ribbed shoulder straps are acceptable but discouraged.|
 +
*No ribbed shoulder straps are present.|}}
-
{{CRLtemplate|File:TD_sandtrooper_straps.jpeg|Shoulder Straps|
+
{{CRLtemplate-nolevels|File:TD_sandtrooper_shoulders.jpeg|Shoulder Armor|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
* Sandtrooper chest and back are attached from within via soft straps. For basic approval ribbed shoulder straps are acceptable but discouraged.|
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
* No ribbed shoulder straps allowed.| }}
+
*The shoulders  are considered effectively symmetrical.
 +
**They may worn interchangeably on the left and right shoulders.
 +
*The Shoulder Armor uses a black elastic strap that wraps around the inside of the bicep.||}}
-
{{CRLtemplate|File:TD_sandtrooper_shoulders.jpeg|Shoulder Bells|
+
{{CRLtemplate-nolevels|File:Sandtrooper_Biceps.jpg|Upper Arm Armor|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are required weathered.
-
*One on each shoulder. The shoulder bells are considered effectively symmetrical; they may worn interchangeably on the left and right shoulders and should have a black elastic strap that wraps around the inside of the bicep. ||}}
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
 +
*Biceps are fully closed.||}}
-
{{CRLtemplate|File:TK_anh_stunt_biceps.jpeg|Biceps|
+
{{CRLtemplate-nolevels|File:TD_sandtrooper_forearms.jpeg|Forearm Armor|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*Biceps are fully closed. ||}}
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
 
+
-
{{CRLtemplate|File:TD_sandtrooper_forearms.jpeg|Forearms|
+
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*Forearms are fully closed ||}}
*Forearms are fully closed ||}}
-
<!-- PAGE BREAK -->
+
{{CRLtemplate-onelevel|File:TD_sandtrooper_handplates.jpeg|Hand Plates|
 +
*All Sandtrooper armor parts are weathered.
 +
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
 +
*Roughly pentagonal in shape, the hand plates are mounted securely over the back of the glove.
 +
**As an alternative to plastic, these may be made out of latex or latex-like material.|
 +
*Hand Plates are made of latex.|}}
-
{{CRLtemplate|File:TD_sandtrooper_handplates.jpeg|Hand Plates|
+
{{CRLtemplate-onelevel|File:TK_anh_stunt_gloves.jpeg|Gloves|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*Roughly pentagonal in shape, the hand plates are mounted securely over the back of the glove. As an alternative to plastic, these may be made out of latex or latex-like material. ||
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
* Latex hand plates required. }}
+
*Black in color, made of non-textured rubber, nomex, leather, or leather-like material.
 +
*Gloves have no visible straps or logos/designs.
 +
*The fingers are enclosed.|
 +
*Gloved are made of rubber.
 +
Optional:  "Cheese grater" hand plates are allowed if used with the correct Backpack / Pauldron/ Weapon configuration.|}}
-
{{CRLtemplate|File:TK_anh_stunt_gloves.jpeg|Gloves|
+
{{CRLtemplate-nolevels|File:TD_sandtrooper_chest.jpeg|Chest Armor|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*Black in color, made of either rubber, nomex, leather, or leather-like material, with no visible straps or logos/designs. The fingers are enclosed, non-textured.| |
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
* Rubber gloves required.
+
*Chest Armor overlaps the Abdomen Armor.||}}
-
*"Cheese grater" hand plates are allowed if used on the correct pack/pauldron/weapon configuration.}}
+
-
{{CRLtemplate|File:TD_sandtrooper_chest.jpeg|Chest|
+
{{CRLtemplate-nolevels|File:TD_sandtrooper_back.jpeg|Back Armor|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*Chest plate overlaps the abdominal plate. ||
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
}}
+
*Back Armor contains a "O II" design.
 +
*Back Armor has minimal to no overlap of the Kidney Armor.||}}
-
{{CRLtemplate|File:TD_sandtrooper_back.jpeg|Back|
+
{{CRLtemplate-nolevels|File:TK_anh_stunt_undersuit.jpeg|Undersuit|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*Back plate contains a "O II" design.
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
*Back plate shall have no, or minimal overlap of the kidney plate.||
+
*Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos/designs.||}}
-
}}
+
-
<!-- PAGE BREAK -->
+
{{CRLtemplate|File:TD_sandtrooper_ab.jpeg|Abdomen Armor|
 +
*All Sandtrooper armor parts are weathered.
 +
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
 +
*Left side Abdomen Armor has a minimum of three, and maximum of four painted white buttons.
 +
*Right side Abdomen Armor is a blank square and does not contain buttons like the Stormtrooper.|
 +
*Armor side gaps are closed or nearly closed.
 +
**No more than 1/2 inch (12.7 mm) gap on either side.
 +
**This is done by adding a shim (or shims) of a similar type and color of material as the Abdomen and Back Armor.
 +
**Shims fit flush and may have seams, though ideally they will be seamless to the Abdomen and/or Back Armor, resulting in a single seam between the two rather than extra seams where the shims are joined.|
 +
*Rivets on the left side of the Abdomen / Kidney Armor:
 +
**A total of (6) rivets with three on the abdomen and three on the kidney.
 +
**Rivets are equally spaced out along the depth of the armor and about 10mm from the edge.
 +
*One snap on the top right hand side of the Abdomen Armor:
 +
**Back of male side of snap shows on outside of Abdomen Armor.
 +
*Visible fasteners under lower Codpiece center area include one split rivet or brad in the front.
 +
**Fasteners need not be functional.}}
-
{{CRLtemplate|File:TK_anh_stunt_undersuit.jpeg|Under Suit|
+
{{CRLtemplate-nolevels|File:TD_sandtrooper_kidney.jpeg|Kidney Armor|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos/designs.| | }}
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
 +
*It is allowable to have a single Kidney and Posterior Armor piece.
 +
**If a separate Kidney plate is used, it lines up with the Abdomen Armor, with the top of the Kidney Armor flush to or under the Back Armor.||}}
-
{{CRLtemplate|File:TD_sandtrooper_ab.jpeg|Abdomen Plate|
+
{{CRLtemplate-onelevel|File:TD_sandtrooper_butt.jpeg|Posterior Armor|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
* Left side ab plate has a minimum of three and maximum of four buttons painted white.
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
*Right side ab plate is blank square and does not contain buttons like stormtrooper.|
+
*It is allowable to have a single Kidney and Posterior Armor piece.
-
*Left side ab plate has 3 buttons.
+
**If a separate Posterior Armor piece is used, it is below the bottom of the belt and lines up with the Kidney Armor, with a minimal gap between it and the Kidney.|
-
* Armor side gaps should be closed or nearly closed; no more than 1/2 inch (12.7 mm) gap on either side.  
+
*Visible fasteners under lower Codpiece center area includes two (or 3) male snaps in the back.
-
**This should be done by adding a shim or shims of material that must be of similar material and color as the ab and back plate.
+
**Fasteners need not be functional.|}}
-
**Shims should fit flush and may have seams, though ideally they will be seamless to the ab and/or back plate, resulting in a single seam between the ab/back rather than extra seams for where the shims are joined.|
+
-
*Rivets on the left side of the ab/kidney plates: a total of six rivets with three on the ab and three on the kidney plate, equally spaced out along the depth of the armor and about 10mm from the edge.
+
-
*One snap on the top right hand side oft he ab plate: back of male side of snap should show on outside of ab plate.
+
-
* Visible fasteners under crotch area. One split rivet or brad in the front. (not required to be functional)
+
-
}}
+
-
{{CRLtemplate|File:TD_sandtrooper_kidney.jpeg|Kidney Plate|
+
{{CRLtemplate-nolevels|File:TD_sandtrooper_belt.jpeg|Belt|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*It is allowable to have a single kidney/butt plate for 501st requirements. If a separate kidney plate is used, it should line up with the ab plate, with the top of the kidney plate being flush to or under the back plate.||
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
}}
+
*Belt face is made of plastic.
 +
*There are three square buttons:
 +
**(1) centered in the middle, and one on each end.
 +
*Belt proper is made of canvas, canvas covered material, leather, or vinyl.
 +
*Belt is 3 to 3.5" wide.
 +
*The color is white to off-white.
 +
*The Belt has no front thigh drop boxes, thermal detonator, or holster.||}}
-
<!-- PAGE BREAK -->
+
{{CRLtemplate-nolevels|File:TD_sandtrooper_thighs.jpeg|Thigh Armor|
 +
*All Sandtrooper armor parts are weathered.
 +
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
 +
*Thigh armor is closed in the back.
 +
*A small ammo belt is installed on the bottom of the right thigh.||}}
-
{{CRLtemplate|File:TD_sandtrooper_butt.jpeg|Butt Plate|
+
{{CRLtemplate-nolevels|File:TD_sandtrooper_shins.jpeg|Lower Leg Armor|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*It is allowable to have a single butt/kidney plate for 501st requirements. If a separate butt plate is used, it should be below the bottom of the belt and line up with the kidney plate, with a minimal gap between it and the kidney plate.||
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
*Visible fasteners under crotch area. Two (or 3) male snaps in the back. (not required to be functional)
+
*Greaves close in the back.  
-
}}
+
*The Diamond Knee plate is a six sided hexagon, mounted onto a five-sided "diamond" shape, with a point on the bottom.
 +
**Diamond Knee plate is on the wearer's left knee.||}}
-
{{CRLtemplate|File:TD_sandtrooper_belt.jpeg|Belt|
+
{{CRLtemplate-nolevels|File:TD_sandtrooper_boots.jpeg|Boots|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
*Belt face is made of plastic. There should be three square button, one centered in the middle and one on each end.
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
*Belt proper is made of canvas, canvas covered material, leather, or vinyl, 3 to 3.5" wide. The color is be white to off-white.
+
*Boots are made of white leather or leather-like material.
-
*No drop boxes (small rectangular parts attached seen hanging from Stormtrooper belts, above the thigh.)
+
*Boots are above ankle height, with a flat sole with and a short heel.
-
*No thermal detonator.
+
**Small U-shaped elastic sections on both sides of the ankle with no buckles or laces.
-
*No holster.||}}
+
**Jodhpur / Chelsea-type boots or an equivalent style is acceptable.
 +
**Elvis or Mariachi boots are inaccurate.||}}
-
{{CRLtemplate|File:TD_sandtrooper_thighs.jpeg|Thighs|
+
{{CRLaccessories}}
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
-
*Thigh armor shall be closed in the back.
+
-
*The small ammo belt is installed on the bottom of the right thigh.||
+
-
}}
+
-
{{CRLtemplate|File:TD_sandtrooper_shins.jpeg|Lower Legs|
+
{{CRLtemplate-nolevels|File:Macrobinoculars.jpg|Macrobinoculars|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*Styled after the ones used by the Sandtrooper in the Special Edition scenes of ANH.||}}
-
*Greaves close in the back.
+
-
* Diamond Knee plate – six sided (hexagon) mounted onto a five-sided "diamond" shape, with a point on the bottom - is on the wearer's left knee. ||}}
+
-
{{CRLtemplate|File:TD_sandtrooper_boots.jpeg|Boots|
+
{{CRLtemplate-nolevels|File:Sandtrooper_Cheese_Grater.jpg|Cheese Grater Hand Plates|
-
*All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*Dimpled or "cheese-grater" style hand plates are worn by several troops in ANH.
-
*White leather or leather-like, above ankle height, with a flat sole with a short heel, and small U-shaped elastic sections on both sides of the ankle with no buckles or laces. Jodhpur/Chelsea-type boots or an equivalent style is acceptable. Elvis or Mariachi boots are not allowed.| |}}
+
*Hand Plates are approximately rectangular, with a pattern of "pill-shaped" indentations.
-
 
+
**There remains much debate if these were formed parts or last-minute replacement parts made of unknown materials.||}}
-
<!-- PAGE BREAK -->
+
-
 
+
-
{{CRLaccessories}}
+
-
{{CRLtemplate|File:TD_sandtrooper_backpack.jpeg|Backpack|
+
{{CRLtemplate-onelevel|File:TD_sandtrooper_backpack.jpeg|Backpack|
-
* Optional due to the presence of sandtroopers without pauldron, shoulder pouch or backpack in the Docking Bay 94 scene in ANH.
+
*Optional due to the presence of Sandtroopers without pauldron, shoulder pouch or backpack in the Docking Bay 94 scene in ANH.
-
* All Sandtrooper armor parts are required to be dirty. See the [[Costuming:TD_sandtrooper_weathering|sandtrooper weathering page]] for more information.
+
*All Sandtrooper armor parts are weathered.
-
* Styled after the ANH Sandtrooper packs or a simplified pack as seen in the video game (Battlefront series).
+
**See the [[Costuming:TD_sandtrooper_weathering|Sandtrooper weathering page]] for more information.
-
* A loose interpretation is allowed, but screen accuracy is encouraged. |
+
*Styled after the ANH Sandtrooper packs or a simplified pack as seen in the video game (Battlefront series).
-
* Backpack required!
+
*A loose interpretation is allowed, but screen accuracy is encouraged.
-
* Comprised of two main boxes (aka Seed Trays), that are the approximate width of the backplate
+
*Option: If choosing to replicate a screen used configuration of equipment, specific style backpacks are required.
 +
**See the [[Costuming:TD_sandtrooper_mepd_SWAT|MEPD SWAT]] page for more details.
 +
**Note: Screen used configurations also include differences in the number of pouches and individual Pauldron colors.|
 +
*Backpack is present.
 +
*Comprised of two main boxes (aka Seed Trays), that are the approximate width of the Back Armor.
* Correct bend on frame.  
* Correct bend on frame.  
-
* No personal liberties such as LED lights, etc.|
+
* No personal liberties such as LED lights, etc.|}}
-
* For MEPD SWAT clearance the pauldron, pouches and backpack must match a screen used configuration. See the [[Costuming:TD_sandtrooper_mepd_SWAT|MEPD SWAT]] page for more details.
+
-
}}
+
-
{{CRLtemplate|File:TK_anh_stunt_e11.jpeg|BlasTech E-11|
+
{{CRLtemplate|File:TK_anh_stunt_e11.jpeg|E-11 Blaster|
*Based on a real or replica Sterling sub-machine gun, scratch-built, or a modified commercial toy Stormtrooper blaster.|
*Based on a real or replica Sterling sub-machine gun, scratch-built, or a modified commercial toy Stormtrooper blaster.|
*Folding stock (does not need to function).
*Folding stock (does not need to function).
*A real or replica ammo counter - based off of a Hengstler counter - shall be present.
*A real or replica ammo counter - based off of a Hengstler counter - shall be present.
*D-ring mounted on the rear.
*D-ring mounted on the rear.
-
*Correct style scope.
+
*Sterling based blasters have the correct M-38 or M-19 style scope.
*Two power cylinders on the magazine housing.
*Two power cylinders on the magazine housing.
-
*Scratch-built, resin cast, Hyperfirm rubber cast blasters shall have a total of 6 T-tracks on blaster (leaving the lowest row on the Hengstler counter side uncovered).
+
*Scratch-built, resin cast, Hyperfirm rubber cast blasters shall have a total of 6 T-tracks on blaster (leaving the lowest row on the magazine housing side uncovered).
-
*Popular commercially available toy Stormtrooper blasters have a total of 7 T-tracks (if you cover all the rows of holes) or 6 T-tracks (if you cover the "open row" of holes on the Hengstler counter side. Below this, you shall grind off the lower T-track and drill a new row of holes).
+
*If using the Hasbro E11 toy blaster and you cover all the rows of holes,  the blaster will have 7 T-tracks total. But, if you want to have the correct number of T-tracks (6 total) with the lower row of open vent holes on the magazine housing side, then you shall cover the pre-existing rows of holes with T-tracks, and grind off the lower integrated T-track on the magazine housing side and drill a new row of holes in its place.
-
*No ESB/ROTJ greeblies are allowed on the blaster..|
+
*No ESB/ROTJ greeblies are allowed on the blaster.|
-
*Hasbro blasters are not allowed, even conversions..}}
+
*Hasbro blasters are not allowed, even conversions.}}
-
 
+
-
<!-- PAGE BREAK -->
+
{{CRL-dlt19}}
{{CRL-dlt19}}
Line 178: Line 215:
{{CRL-t21}}
{{CRL-t21}}
-
{{CRLtemplate|File:Blankwhite.gif|Dewback Prod|
+
{{CRLtemplate-nolevels|File:Sandtrooper_Prod.jpg|Dewback Prod|
-
* The prod is a black pole, approx 96″ long, with metal details at both ends.  
+
*The prod is a black pole, approx 96″ long, with metal details at both ends.  
-
* Many opt for a shorter length.||}}
+
**A shorter length is optional.||}}
-
 
+
-
{{CRLtemplate|File:TD binocs.jpg|Macrobinoculars|
+
-
*Styled after the ones used by the Sandtrooper in the Special Edition scenes of ANH..| | }}
+
-
 
+
-
<!-- PAGE BREAK -->
+
-
 
+
-
{{CRLtemplate|File:Blankwhite.gif|Cheese Grater Handplates|
+
-
* Dimpled or "cheese-grater" style handbacks were worn by several troops in ANH, and are approximately rectangular, and have a pattern of "pill-shaped" indentations.
+
-
* There remains much debate if these were formed parts or last-minute replacement parts made of unknown materials.||}}
+
{{CRLfooter|MEPD_CRL|T}}
{{CRLfooter|MEPD_CRL|T}}

Latest revision as of 13:39, 3 January 2015

crlblackhd.gif
Sandtrooper
TD sandtrooper full.jpeg
Model TD-8800, Photo by Juan Arvizu


MEPD.png

Description: Sandtrooper
Prefix: TD
Detachment: Mos Eisley Police Department
Context: Star Wars Episode IV: A New Hope

The Sandtrooper is a desert terrain Stormtrooper equipped with modified armor and gear to better withstand missions in harsh arid environments. While their armor is superficially similar to that of the standard Stormtrooper, advanced cooling systems in both their helmets and suits offer these troopers protection from the relentless heat.


The 501st approval requirements are listed in black.

MEPD Defines two additional, optional levels of costuming excellence: Police Officer and SWAT. In the page below, requirements for Police Officer are listed in blue. SWAT requirements are in red. Please visit the MEPD web site for a full description of these standards.


For 501st membership only the requirements in black need to be met.



This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
  • Any uncertainties or questionable aspects of the submitted costume should be brought to the appropriate DL/GML peer review section of the legion forum.
Required Costume Components

The following costume components are present and appear as described below.

TD sandtrooper helmet.jpeg Helmet
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Frown is painted gray and does not leave the teeth area.
  • Between six and eight total teeth on the frown cut out.
  • Traps and tears are gray.
  • No vertical black lines in any traps or tears.
  • Medium blue, backward bent tube stripes number between (9) and (16) per side.
    • Navy blue and/ or black stripes are inaccurate.
    • Does not need to be an equal amount of stripes per side.
  • Lenses are flat green or smoke.
    • Lenses are dark enough that viewers cannot see the wearers eyes behind them.
  • Chin vocoder is painted black.
  • The ears have four raised bumps, painted gray in color with a black outline. **One bump is painted black.
  • Two aerators (a.k.a. "microphone tips") are present.


For level two certification (if applicable):
  • Lenses are flat green.
  • Four "teeth" cut out on either side of the helmet "frown".
  • Correct Hovi-Mix mic tips.
  • FX helmets are not allowed.
For level three certification (if applicable):
  • FX, MRCE and/or ANHv2 helmets are not allowed.



TK anh stunt neckseal.jpeg Neck Seal
For 501st approval:
  • Black with horizontal ribs, fitted to the wearer, and extending from the base of the neck to the top of the Adam's apple.


TD sandtrooper pouches.jpeg Ammo Pouches
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Black in color, made of canvas, leather or leather-like German MP-40 style ammo pouches.
  • The standard configuration calls for a minimum of two pouches:
    • one pouch on the left shoulder and one on the right hip.
    • A third worn on the opposite hip is allowed.
  • Option: If choosing to replicate a screen used configuration of equipment, the number of pouches may be altered.
    • See the MEPD SWAT page for more details.
    • Note: Screen used configurations also include specific color Pauldrons and individual backpacks styles.


TD sandtrooper pauldron.jpeg Pauldron
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • A black, orange, or white neck ornament made of leather or a leather-like material, worn over the right shoulder.
  • Option: If choosing to replicate a screen used configuration of equipment, specific colored Pauldrons are required.
    • See the MEPD SWAT page for more details.
    • Note: Screen used configurations also include differences in the number of pouches and individual backpacks styles.


TD sandtrooper straps.jpeg Shoulder Straps
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Sandtrooper Chest and Back Armor are attached from within via soft straps.
    • For basic approval ribbed shoulder straps are acceptable but discouraged.


For level two certification (if applicable):
  • No ribbed shoulder straps are present.


TD sandtrooper shoulders.jpeg Shoulder Armor
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • The shoulders are considered effectively symmetrical.
    • They may worn interchangeably on the left and right shoulders.
  • The Shoulder Armor uses a black elastic strap that wraps around the inside of the bicep.


Sandtrooper Biceps.jpg Upper Arm Armor
For 501st approval:
  • All Sandtrooper armor parts are required weathered.
  • Biceps are fully closed.


TD sandtrooper forearms.jpeg Forearm Armor
For 501st approval:


TD sandtrooper handplates.jpeg Hand Plates
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Roughly pentagonal in shape, the hand plates are mounted securely over the back of the glove.
    • As an alternative to plastic, these may be made out of latex or latex-like material.


For level two certification (if applicable):
  • Hand Plates are made of latex.


TK anh stunt gloves.jpeg Gloves
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Black in color, made of non-textured rubber, nomex, leather, or leather-like material.
  • Gloves have no visible straps or logos/designs.
  • The fingers are enclosed.


For level two certification (if applicable):
  • Gloved are made of rubber.

Optional: "Cheese grater" hand plates are allowed if used with the correct Backpack / Pauldron/ Weapon configuration.

TD sandtrooper chest.jpeg Chest Armor
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Chest Armor overlaps the Abdomen Armor.


TD sandtrooper back.jpeg Back Armor
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Back Armor contains a "O II" design.
  • Back Armor has minimal to no overlap of the Kidney Armor.


TK anh stunt undersuit.jpeg Undersuit
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos/designs.


TD sandtrooper ab.jpeg Abdomen Armor
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Left side Abdomen Armor has a minimum of three, and maximum of four painted white buttons.
  • Right side Abdomen Armor is a blank square and does not contain buttons like the Stormtrooper.


For level two certification (if applicable):
  • Armor side gaps are closed or nearly closed.
    • No more than 1/2 inch (12.7 mm) gap on either side.
    • This is done by adding a shim (or shims) of a similar type and color of material as the Abdomen and Back Armor.
    • Shims fit flush and may have seams, though ideally they will be seamless to the Abdomen and/or Back Armor, resulting in a single seam between the two rather than extra seams where the shims are joined.
For level three certification (if applicable):
  • Rivets on the left side of the Abdomen / Kidney Armor:
    • A total of (6) rivets with three on the abdomen and three on the kidney.
    • Rivets are equally spaced out along the depth of the armor and about 10mm from the edge.
  • One snap on the top right hand side of the Abdomen Armor:
    • Back of male side of snap shows on outside of Abdomen Armor.
  • Visible fasteners under lower Codpiece center area include one split rivet or brad in the front.
    • Fasteners need not be functional.


TD sandtrooper kidney.jpeg Kidney Armor
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • It is allowable to have a single Kidney and Posterior Armor piece.
    • If a separate Kidney plate is used, it lines up with the Abdomen Armor, with the top of the Kidney Armor flush to or under the Back Armor.


TD sandtrooper butt.jpeg Posterior Armor
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • It is allowable to have a single Kidney and Posterior Armor piece.
    • If a separate Posterior Armor piece is used, it is below the bottom of the belt and lines up with the Kidney Armor, with a minimal gap between it and the Kidney.


For level two certification (if applicable):
  • Visible fasteners under lower Codpiece center area includes two (or 3) male snaps in the back.
    • Fasteners need not be functional.


TD sandtrooper belt.jpeg Belt
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Belt face is made of plastic.
  • There are three square buttons:
    • (1) centered in the middle, and one on each end.
  • Belt proper is made of canvas, canvas covered material, leather, or vinyl.
  • Belt is 3 to 3.5" wide.
  • The color is white to off-white.
  • The Belt has no front thigh drop boxes, thermal detonator, or holster.


TD sandtrooper thighs.jpeg Thigh Armor
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Thigh armor is closed in the back.
  • A small ammo belt is installed on the bottom of the right thigh.


TD sandtrooper shins.jpeg Lower Leg Armor
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Greaves close in the back.
  • The Diamond Knee plate is a six sided hexagon, mounted onto a five-sided "diamond" shape, with a point on the bottom.
    • Diamond Knee plate is on the wearer's left knee.


TD sandtrooper boots.jpeg Boots
For 501st approval:
  • All Sandtrooper armor parts are weathered.
  • Boots are made of white leather or leather-like material.
  • Boots are above ankle height, with a flat sole with and a short heel.
    • Small U-shaped elastic sections on both sides of the ankle with no buckles or laces.
    • Jodhpur / Chelsea-type boots or an equivalent style is acceptable.
    • Elvis or Mariachi boots are inaccurate.


Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.

Macrobinoculars.jpg Macrobinoculars
For 501st approval:
  • Styled after the ones used by the Sandtrooper in the Special Edition scenes of ANH.


Sandtrooper Cheese Grater.jpg Cheese Grater Hand Plates
For 501st approval:
  • Dimpled or "cheese-grater" style hand plates are worn by several troops in ANH.
  • Hand Plates are approximately rectangular, with a pattern of "pill-shaped" indentations.
    • There remains much debate if these were formed parts or last-minute replacement parts made of unknown materials.


TD sandtrooper backpack.jpeg Backpack
For 501st approval:
  • Optional due to the presence of Sandtroopers without pauldron, shoulder pouch or backpack in the Docking Bay 94 scene in ANH.
  • All Sandtrooper armor parts are weathered.
  • Styled after the ANH Sandtrooper packs or a simplified pack as seen in the video game (Battlefront series).
  • A loose interpretation is allowed, but screen accuracy is encouraged.
  • Option: If choosing to replicate a screen used configuration of equipment, specific style backpacks are required.
    • See the MEPD SWAT page for more details.
    • Note: Screen used configurations also include differences in the number of pouches and individual Pauldron colors.


For level two certification (if applicable):
  • Backpack is present.
  • Comprised of two main boxes (aka Seed Trays), that are the approximate width of the Back Armor.
  • Correct bend on frame.
  • No personal liberties such as LED lights, etc.


TK anh stunt e11.jpeg E-11 Blaster
For 501st approval:
  • Based on a real or replica Sterling sub-machine gun, scratch-built, or a modified commercial toy Stormtrooper blaster.


For level two certification (if applicable):
  • Folding stock (does not need to function).
  • A real or replica ammo counter - based off of a Hengstler counter - shall be present.
  • D-ring mounted on the rear.
  • Sterling based blasters have the correct M-38 or M-19 style scope.
  • Two power cylinders on the magazine housing.
  • Scratch-built, resin cast, Hyperfirm rubber cast blasters shall have a total of 6 T-tracks on blaster (leaving the lowest row on the magazine housing side uncovered).
  • If using the Hasbro E11 toy blaster and you cover all the rows of holes, the blaster will have 7 T-tracks total. But, if you want to have the correct number of T-tracks (6 total) with the lower row of open vent holes on the magazine housing side, then you shall cover the pre-existing rows of holes with T-tracks, and grind off the lower integrated T-track on the magazine housing side and drill a new row of holes in its place.
  • No ESB/ROTJ greeblies are allowed on the blaster.
For level three certification (if applicable):
  • Hasbro blasters are not allowed, even conversions.



Generic-dlt19.jpeg DLT-19 Heavy Blaster Rifle
For 501st approval:

Manufactured by BlasTech Industries, the DLT-19 heavy blaster rifle is much more powerful with a much greater range than the E-11 blaster. Because of its powerful, long range capabilities, this rifle is commonly used on Imperial controlled planets with large, clear, open areas.

  • Based on a real or replica MG-34 machine gun.


For level two certification (if applicable):
  • A DLT-19 is an MG-34 with T-tracks on the barrel, ejection port cover added, and a small disk on left side.



Generic-rt97.jpeg RT-97C Heavy Blaster Rifle
For 501st approval:

Manufactured by BlasTech Industries, the RT-97C features a long barrel to increase the firing range of the energy beam projectile. Three scopes increase accuracy and versatility. The first scope is an energy scanner capable of detecting life forms. The second scope is a rangefinder that automatically adjusts the targeting components. The third scope uses infrared heat imaging technology.

  • Based on a real or replica MG-15 machine gun.


For level two certification (if applicable):
  • Correct style scopes.
  • Silver metal hose is present on the right hand side of barrel between the trigger and "saddle barrel".



Generic-t21.jpeg T-21 Light Repeating Blaster Rifle
For 501st approval:

Manufactured by BlasTech Industries.

  • Based on a real or replica Lewis Mark I machine gun. For this prop the magazine disk and bipod of the original gun are left off.


For level two certification (if applicable):
  • A ribbed length of tubing shall be installed over the front of the gun barrel.
  • A canvas, leather, or nylon sling shall be attached.
  • Sight shall be present on top where ribbing meets base.


Sandtrooper Prod.jpg Dewback Prod
For 501st approval:
  • The prod is a black pole, approx 96″ long, with metal details at both ends.
    • A shorter length is optional.



This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.