crlblackhd.gif
Clone Trooper Draa
Missingprofile.jpg
Model MODEL NAME, Photo by PHOTOGRAPHER NAME


Clone-Trooper-Detachment.png

Description: Clone Trooper Draa
Prefix: TC
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Season 2 - Episode 6

Draa serves in Green Company of the 41st Elite Corps as a heavy weapons specialist.


The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: Effective June 1 2012, the 501st will no longer be approving realistic interpretations of Clone Wars CG characters. The armor sculpt must match the character being recreated. See this thread at clonetroopers.net for the differences between the sculpts.

This CRL entry has been reviewed by the detachment staff and the LMO team. Costumes of this type must be submitted to the LMO team via the GML forum at 501st.com for approval.

Required Costume Components

The following costume components must be present and appear as described below for approval .

Blankwhite.gif Helmet
For 501st approval:
  • Helmet must be painted matte or satin white.
  • Fin on top of helmet is painted green.
  • A stylized Republic Military symbol, painted in red, is located on the left side of the helmets forehead.
  • Green V shape covers much of the helmet face. This marking extends from upper ear on side of helmet, down to the chin and back up to other ear piece.
  • If weathered, the green area includes scuff marks and fading. The white areas are shades of grey.
  • 4 Vents on each side of helmet. May be painted black or grey, or cut out and filled with black mesh.
  • Raised white circle at the back of the helmet.
  • Eye lens is black.
For level two certification (if applicable):
  • Helmet must be weathered.
For level three certification (if applicable):


TC animated neckseal.jpg Neck Seal
For 501st approval:
  • Neck seal to be black in color with no ribbing.
  • No logos or labels are to be visible.
  • If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.
For level two certification (if applicable):
  • Neck seal should close via 2 small black snaps in the front.
For level three certification (if applicable):


TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


Blankwhite.gif Shoulder Bells
For 501st approval:
  • Armor must be painted matte or satin white.
  • The bottom 1/3 of shoulder armor has a wide painted green stripe.
  • On left shoulder only there is a large green "Double G" marking which resembles an animal similar to a fox.
  • If weathered, the green area includes scuff marks and fading. The white areas are shades of grey.
For level two certification (if applicable):
  • Armor must be weathered.
For level three certification (if applicable):


TC animated grunt biceps.jpg Upper Arm Armor
For 501st approval:
  • Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
  • Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
  • Armor must be seamless. No visible traces of how the armor was assembled should be shown.
For level two certification (if applicable):
  • Armor must be weathered.
For level three certification (if applicable):


TC animated grunt forearms.jpg Forearm Armor
For 501st approval:
  • Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
  • Left forearm must have a compad that has 4 main square recessed areas and 1 slightly smaller square recessed area. The smaller recess is closest to the elbow.
  • Armor must be seamless on the outside edge. Due to the shape of the armor, a butted seam is acceptable on the inside if required.
  • Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
For level two certification (if applicable):
  • Armor must be seamless. No visible traces of how the armor was assembled should be shown.
  • Armor must be weathered.
For level three certification (if applicable):


TC animated handplates.jpg Hand Plates
For 501st approval:
  • Painted with a base color of matte or satin white.
    • If weathered, the weathering should be shades of grey.
  • Hand plates are mirror images of each other.
  • Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
For level two certification (if applicable):

Armor must be weathered.

For level three certification (if applicable):


Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Chest Armor
For 501st approval:
  • Armor must be painted matte or satin white.
  • Extending at downward angle from the shoulder areas are wide green painted stripes.
    • When standing at ease, the tops of these stripes align with the tops of the shoulder stripes.
    • Tops of stripes continue around and onto the back armor. See: "Back Armor" section for details.
    • When the abdomen armor is in place, these stripes continue onto that armor piece as well. See: "Abdomen Armor" section for details.
  • If weathered, the green area includes scuff marks and fading. The white areas are shades of grey.
  • Lower portion of the chest has a curved area to match the abdomen armor.
  • Chest and back plate must match together at the sides and shoulders with no open gap.
  • There is a butted seam line between the front and back armor pieces.
  • Shoulder straps must be placed over the chest and back armor at the seams.
For level two certification (if applicable):
  • Armor must be weathered.
For level three certification (if applicable):
Blankwhite.gif Back Armor
For 501st approval:
  • Armor must be painted matte or satin white.
  • The previous green stripes, from the chest armor, now extend to the back armor and end just below the top edge of the rear detail plate.
  • If weathered, the green area includes scuff marks and fading. The white areas are shades of grey.
  • Rear detail plate contains a "O 11" pattern, similar to a standard Stormtrooper.
  • Shoulder straps should be placed over the chest and back armor at the seams.
For level two certification (if applicable):
  • Armor must be weathered.
For level three certification (if applicable):
Blankwhite.gif Ab Armor
For 501st approval:
  • Armor must be painted matte or satin white.
  • The previous green stripes, from the chest armor, now extend down onto the abdomen forming a V shape with a split center white gap between the two stripes.
  • If weathered, the green area includes scuff marks and fading. The white areas are shades of grey.
  • Top edge of the armor is curved to match the chest.
  • The ab armor protrudes out in the middle to match the shape of the chest armor.
  • 4 inset lines divide the ab plate into segments.
  • A butted seam between ab plate and kidney is acceptable.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Kidney Armor
For 501st approval:
  • Armor must be painted matte or satin white.
    • If weathered, the weathering should be shades of grey.
  • A butted seam between ab plate and kidney is acceptable.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Codpiece and belt front
For 501st approval:
  • Armor must be painted matte or satin white.
  • If weathered, the weathering should be shades of grey.
  • Belt is approx 3" tall and divided into 1.75" wide segments. The front segments have a key/slot detail.
  • Belt boxes are mounted at the hips. Butted seams are permitted at this connection if required.
  • Cod and Posterior armor should connect at the hips.
For level two certification (if applicable):
  • Armor must be weathered.
For level three certification (if applicable):
Blankwhite.gif Posterior Armor, Belt rear and Detonator
For 501st approval:
  • Armor should be painted matte or satin white.
  • If weathered, the weathering should be shades of grey.
  • Integrated rear belt.
  • Attached thermal detonator.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Thigh Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • The top of each thigh piece has a wide green stripe which wraps around the leg at the same angle as the top edge of the armor piece.
  • If weathered, the green area includes scuff marks and fading. The white areas are shades of grey.
  • Armor should be seamless. No visible traces of how the armor was assembled should be shown.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Lower Leg Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Knee armor is integrated into the top of the armor piece.
  • Front of knee area has green stripe which reaches from the top to the bottom of the knee.
For level two certification (if applicable):
For level three certification (if applicable):


TC animated boots.jpg Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor. Boots must be lace-less and have flat soles.
  • Boots have a center strip running from the toe to the ankle, a strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.
For level two certification (if applicable):
  • Boots must have accurate notched sole.
For level three certification (if applicable):
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present must meet the guidelines below.


CRLdc15s-animated.jpg DC-15S Blaster Carbine (animated style)
For 501st approval:

This is the animated variant of the DC-15S blaster rifle. Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.



Blankwhite.gif DC-15A Blaster Rifle (animated style)
For 501st approval:

This is the animated variant of the DC-15A blaster rifle. Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.


Blankwhite.gif RPS-6 Rocket Launcher
For 501st approval:

Manufactured by Merr-Sonn Munitions, Inc. , this portable rocket launcher is capable of penetrating ray shields and is primarily used as a anti-vehicle weapon.

For level two certification (if applicable):
For level three certification (if applicable):


Blankwhite.gif Clonetrooper Backpack
For 501st approval:
  • Standard issue Republic Military backpack with heavy cloth or canvas cover.
For level two certification (if applicable):
For level three certification (if applicable):

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:TC_CW-animated_draa

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.