(Difference between revisions)
Line 8: Line 8:
{{CRLwiplmoapproval}}
{{CRLwiplmoapproval}}
-
{{CRLfooter|CTN_CRL|T}}
+
{{CRLrequirements}}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Helmet|
 +
* Clone Wars style helmet required. Movie style helmets cannot be combined with animated armor.
 +
* Helmet must be painted matte or satin white. If weathered, the weathering should be shades of grey.
 +
* A dark tangerine upside down triangle shall be painted above the lens and squaring off 1" under the helmet fin. The fin shall remain satin white.
 +
* The front rim under the brow trim just above the lens from ear to ear shall be painted dark tangerine. Consult reference images for more detail.
 +
* The Outer flat surface of the ears shall be painted dark tangerine. The ear caps are to remain white. Consult reference images for more detail.
 +
* The left top side of the helmet shall have a charcoal grey or weathered black birdlike shaped insignia located over the brow trim.
 +
* Black visor extends down through the entire frown area.
 +
* Narrow fin on dome.
 +
* Raised bump at each ear, 1" - 1.25" in diameter.
 +
* 4 Vents on each side of helmet. May be painted black or grey, or cut out and filled with black mesh.
 +
* Grey stripe runs around back of dome.
 +
* Raised satin white circle at the back of the helmet.
 +
* Rectangular indent at the back of the helmet shall be grey or heavily weathered black.|
 +
* Helmet must be weathered. | }}
 +
 
 +
{{CRL-TC_animated_neckseal}}
 +
 
 +
{{CRL-generic-undersuit}}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Shoulder Bells|
 +
* Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Shoulder armor shall have a 3 1/2" to 4" dark tangerine stripe running down the center from top to bottom and look to be weathered.Consult reference images for more detail.
 +
* Shoulders should be padded so as not to sit flat against the arms. The top of the bell should sit 3/4" - 1" above the natural shoulder.|
 +
* Shoulder bells must be weathered. | }}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Upper Arm Armor|
 +
* Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
 +
* Armor must be seamless.  No visible traces of how the armor was assembled should be shown. |
 +
* Upper arm armor must be weathered. |}}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Forearm Armor|
 +
* Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Left forearm must have a compad that has 4 main square recessed areas and 1 slightly smaller square recessed area. The smaller recess is closest to the elbow.
 +
* Armor must be seamless on the outside edge. Due to the shape of the armor, a butted seam is acceptable on the inside if required. 
 +
* Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
 +
* Elbow plate attached to the forearm shall be painted dark tangerine and the edges shall have a satin white trim 1/4" all around. Consult reference images for more detail.
 +
* Armor must be seamless. No visible traces of how the armor was assembled should be shown.
 +
* Forearm armor must be weathered. | }}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Hand Plates|
 +
* Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Hand plates shall be painted dark tangerine and the edges shall have a satin white trim 1/4" all around,and are reverse images of each other. Consult reference images for more detail. |
 +
* Hand plates must be weathered. | }}
 +
 
 +
{{CRL-generic_black_gloves}}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Chest Armor|
 +
* Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Chest armor shall be painted dark tangerine on the top in an upside down gradual sloping triangle and stop on the top of each shoulder. Consult reference images for more detail.
 +
* Dark tangerine shall be painted from top to bottom on the back edge of the chest armor starting under the armpit and continue to the back plate.
 +
* Shoulder straps shall be painted satin white.
 +
* Chest armor must be weathered. | }}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Back Armor|
 +
* Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Back armor is dark tangerine on the bottom and has a revers image of the front. Being a satin white upside down triangle that covers the back detail. Consult reference images for more detail.
 +
* Back armor must be weathered. | }}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Ab Armor|
 +
* Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Ab armor must be weathered. | }}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Kidney Armor|
 +
* Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Kidney armor must be weathered. | }}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Cod Armor|
 +
* Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Cod armor shall have a 5" dark tangerine stripe that starts under the belt and squares off an inch above the growing area.
 +
* Cod armor must be weathered. | }}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Butt Armor|
 +
* Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Butt armor must be weathered. | }}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Belt and Ammo Box's|
 +
* Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Belt must have two belt box's one on each side the left and right of the belt mirrored images of each other.
 +
* belt and box's must be weathered. | }}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Thigh Armor|
 +
* Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Thigh armor must be weathered. | }}
 +
 
 +
{{CRLtemplate|File:Blankwhite.gif|Shin Armor|
 +
* Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Shin armor is dark tangerine on the knee plates with a 1/4" satin white edge that goes all around the edge. The lower part of the shin armor shall have a dark tangerine anklet painted around the shins ending 1" up around the bottom edge. Consult reference images for more detail.
 +
* Shin armor must be weathered. | }}
 +
 
 +
{{CRL-TC_animated_boots}}
 +
* Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
 +
* Boots must be weathered. | }}
 +
 
 +
{{CRLaccessories}}
 +
 
 +
{{CRLdc15s-animated}}
 +
 
 +
{{CRLdc15a-animated}}

Revision as of 23:10, 22 March 2012

crlblackhd.gif
Clone Trooper Boil
Missingprofile.jpg
Model MODEL NAME, Photo by PHOTOGRAPHER NAME


Clone-Trooper-Detachment.png

Description: Clone Trooper Boil
Prefix: TC
Detachment: Clone Trooper Detachment
Context: The Clone Wars, seasons 1-3
"Boil" was the nickname of a clone trooper who served in Ghost Company, a unit of the Grand Army of the Republic's 212th Attack Battalion. He first appears on screen in Season 1 Episode 20 "Innocents of Ryloth".


The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

  • This CRL is a work in progress.
  • As such, this costume must be approved by the Legion Membership Officer, via the appropriate section of the Legion forum.
  • If you have this costume and would like to assist with the completion of this library entry, please contact your detachment leader.
  • Please note that the use of the word "should" below does not indicate that the armor piece is considered open to interpretation. All instances of "should be" and "should have" will be replaced with "is" and "has", as this guide is completed.

Required Costume Components

The following costume components are present and appear as described below.

Blankwhite.gif Helmet
For 501st approval:
  • Clone Wars style helmet required. Movie style helmets cannot be combined with animated armor.
  • Helmet must be painted matte or satin white. If weathered, the weathering should be shades of grey.
  • A dark tangerine upside down triangle shall be painted above the lens and squaring off 1" under the helmet fin. The fin shall remain satin white.
  • The front rim under the brow trim just above the lens from ear to ear shall be painted dark tangerine. Consult reference images for more detail.
  • The Outer flat surface of the ears shall be painted dark tangerine. The ear caps are to remain white. Consult reference images for more detail.
  • The left top side of the helmet shall have a charcoal grey or weathered black birdlike shaped insignia located over the brow trim.
  • Black visor extends down through the entire frown area.
  • Narrow fin on dome.
  • Raised bump at each ear, 1" - 1.25" in diameter.
  • 4 Vents on each side of helmet. May be painted black or grey, or cut out and filled with black mesh.
  • Grey stripe runs around back of dome.
  • Raised satin white circle at the back of the helmet.
  • Rectangular indent at the back of the helmet shall be grey or heavily weathered black.
For level two certification (if applicable):
  • Helmet must be weathered.
For level three certification (if applicable):


TC animated neckseal.jpg Neck Seal
For 501st approval:
  • Neck seal is black in color with no ribbing.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.
For level two certification (if applicable):
  • Neck seal closes in the front via 2 small black snaps.


TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


Blankwhite.gif Shoulder Bells
For 501st approval:
  • Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
  • Shoulder armor shall have a 3 1/2" to 4" dark tangerine stripe running down the center from top to bottom and look to be weathered.Consult reference images for more detail.
  • Shoulders should be padded so as not to sit flat against the arms. The top of the bell should sit 3/4" - 1" above the natural shoulder.
For level two certification (if applicable):
  • Shoulder bells must be weathered.
For level three certification (if applicable):
Blankwhite.gif Upper Arm Armor
For 501st approval:
  • Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
  • Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
  • Armor must be seamless. No visible traces of how the armor was assembled should be shown.
For level two certification (if applicable):
  • Upper arm armor must be weathered.
For level three certification (if applicable):
Blankwhite.gif Forearm Armor
For 501st approval:
  • Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
  • Left forearm must have a compad that has 4 main square recessed areas and 1 slightly smaller square recessed area. The smaller recess is closest to the elbow.
  • Armor must be seamless on the outside edge. Due to the shape of the armor, a butted seam is acceptable on the inside if required.
  • Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
  • Elbow plate attached to the forearm shall be painted dark tangerine and the edges shall have a satin white trim 1/4" all around. Consult reference images for more detail.
  • Armor must be seamless. No visible traces of how the armor was assembled should be shown.
  • Forearm armor must be weathered.
For level two certification (if applicable):
For level three certification (if applicable):
{{{5}}}
Blankwhite.gif Hand Plates
For 501st approval:
  • Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
  • Hand plates shall be painted dark tangerine and the edges shall have a satin white trim 1/4" all around,and are reverse images of each other. Consult reference images for more detail.
For level two certification (if applicable):
  • Hand plates must be weathered.
For level three certification (if applicable):


Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.


Blankwhite.gif Chest Armor
For 501st approval:
  • Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
  • Chest armor shall be painted dark tangerine on the top in an upside down gradual sloping triangle and stop on the top of each shoulder. Consult reference images for more detail.
  • Dark tangerine shall be painted from top to bottom on the back edge of the chest armor starting under the armpit and continue to the back plate.
  • Shoulder straps shall be painted satin white.
  • Chest armor must be weathered.
For level two certification (if applicable):
For level three certification (if applicable):
{{{5}}}
Blankwhite.gif Back Armor
For 501st approval:
  • Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
  • Back armor is dark tangerine on the bottom and has a revers image of the front. Being a satin white upside down triangle that covers the back detail. Consult reference images for more detail.
  • Back armor must be weathered.
For level two certification (if applicable):
For level three certification (if applicable):
{{{5}}}
Blankwhite.gif Ab Armor
For 501st approval:
  • Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
  • Ab armor must be weathered.
For level two certification (if applicable):
For level three certification (if applicable):
{{{5}}}
Blankwhite.gif Kidney Armor
For 501st approval:
  • Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
  • Kidney armor must be weathered.
For level two certification (if applicable):
For level three certification (if applicable):
{{{5}}}
Blankwhite.gif Cod Armor
For 501st approval:
  • Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
  • Cod armor shall have a 5" dark tangerine stripe that starts under the belt and squares off an inch above the growing area.
  • Cod armor must be weathered.
For level two certification (if applicable):
For level three certification (if applicable):
{{{5}}}
Blankwhite.gif Butt Armor
For 501st approval:
  • Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
  • Butt armor must be weathered.
For level two certification (if applicable):
For level three certification (if applicable):
{{{5}}}
Blankwhite.gif Belt and Ammo Box's
For 501st approval:
  • Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
  • Belt must have two belt box's one on each side the left and right of the belt mirrored images of each other.
  • belt and box's must be weathered.
For level two certification (if applicable):
For level three certification (if applicable):
{{{5}}}
Blankwhite.gif Thigh Armor
For 501st approval:
  • Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
  • Thigh armor must be weathered.
For level two certification (if applicable):
For level three certification (if applicable):
{{{5}}}
Blankwhite.gif Shin Armor
For 501st approval:
  • Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
  • Shin armor is dark tangerine on the knee plates with a 1/4" satin white edge that goes all around the edge. The lower part of the shin armor shall have a dark tangerine anklet painted around the shins ending 1" up around the bottom edge. Consult reference images for more detail.
  • Shin armor must be weathered.
For level two certification (if applicable):
For level three certification (if applicable):
{{{5}}}


TC animated boots.jpg Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
  • Boots are lace-less and have flat soles.
  • Boots have a center strip running from the toe to the ankle.
  • A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.
For level two certification (if applicable):
  • Boots have accurate notched sole.
  • Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
  • Boots must be weathered. | }}
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.


CRLdc15s-animated.jpg DC-15S Blaster Carbine (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.

  • This is the animated variant of the DC-15S blaster rifle.



Dc15a Animated.jpg DC-15A Blaster Rifle (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.

  • This is the animated variant of the DC-15A blaster rifle.


Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.