(Difference between revisions)
(Created page with "{{CRLheader|Coruscant Guard, Phase 1|File:Missingprofile.jpg|MODEL NAME|PHOTOGRAPHER NAME}} {{CRLdetinfo| 1111 |Coruscant Guard, Phase 1|TC|The Clone Wars, seasons 1-3|The Corus...")
 
(33 intermediate revisions not shown)
Line 1: Line 1:
-
{{CRLheader|Coruscant Guard, Phase 1|File:Missingprofile.jpg|MODEL NAME|PHOTOGRAPHER NAME}}
+
{{CRLheader|Coruscant Guard|File:Coruscant_Guard.jpg|TC 8916|Michael H.}}
-
{{CRLdetinfo| 1111 |Coruscant Guard, Phase 1|TC|The Clone Wars, seasons 1-3|The Coruscant Guard and has appeared in both the series and the original theatrical release. They operated the Diplomatic Escort Group which was charged with protecting diplomats on key missions.
+
{{CRLdetinfo| 1111 |Coruscant Guard|TC|The Clone Wars: Seasons 1-3|
-
}}
+
 
 +
The prestigious Coruscant Guard is a specialized division of the Grand Army of the Republic stationed on the capital planet of Coruscant. The Coruscant Guard is responsible for guarding and protecting vital infrastructure and government buildings as well as providing escort duty for Galactic Senate members and other dignitaries on diplomatic missions.}}
{{CRLctnlevels}}
{{CRLctnlevels}}
-
{{CRLwiplmoapproval}}
+
{{CRLgmlapproval}}
{{CRLrequirements}}
{{CRLrequirements}}
-
{{CRLtemplate|File:Blank.jpg|Helmet|
+
{{CRLtemplate-nolevels|File:Coruscant_Guard_Helmet.jpg|Helmet|
-
* Clone Wars style helmet required. Movie style helmets cannot be combined with animated armor.
+
*Animated Phase I style helmet.
-
* Helmet must be painted matte or satin white. If weathered, the weathering should be shades of grey.
+
**Movie style helmets are not combined with animated armor.
-
*A dark scarlet line about 1 inch wide shall be painted above the brow of the visor from left to right.
+
*Helmet is painted matte or satin white with dark scarlet detail.
-
*A dark scarlet diamond shall be painted in the center of the forehead of the helmet from the brow of the visor and ends just at the start of the fin.
+
-
*A dark scarlet inverted triangle shall be painted below the visor, extending on either side of the "center" of the helmet down the sides about halfway. Consult reference images for more detail.
+
-
*The ear caps on the left and rights sides of the helmet shall be painted matte or satin white and weathered.
+
-
*A black visor extends down through the entire frown area.
+
*Narrow fin on dome.
*Narrow fin on dome.
-
*Raised bump at each ear, 1" - 1.25" in diameter.
+
*A dark scarlet line, about 1 inch wide, wraps around the entire dome just above brow band.
-
*4 Vents on each side of helmet. May be painted black or grey, or cut out and filled with black mesh.
+
*Two dark scarlet diamonds are aligned vertically and centered on the front of the helmet.
-
*A grey stripe runs around back of dome.
+
**Upper dark scarlet diamond is centered above the brow band between the scarlet line and front starting edge of fin.  Bottom point is part of the scarlet line.
-
*Raised satin white circle at the back of the helmet.
+
**Lower dark scarlet diamond is centered below the frown and continues down to align with chin opening.  Bottom point is not visible due to chin opening.
-
*Rectangular indent at the back of the helmet shall be black or heavily weathered grey. |
+
*A black eye lens extends down through the entire frown area.
-
* Helmet must be weathered. | }}
+
*(4) Vents on each side of helmet.
 +
**Vent indents may be painted black or grey, or cut out and filled with black mesh.
 +
*A grey indented helmet band runs around back of dome.
 +
*Raised white circle at the back center of the helmet.
 +
*Scuff marks on dark scarlet expose underlying white.
 +
*Armor is weathered with shades of grey.||}}
{{CRL-TC_animated_neckseal}}
{{CRL-TC_animated_neckseal}}
Line 30: Line 32:
{{CRL-generic-undersuit}}
{{CRL-generic-undersuit}}
-
{{CRLtemplate|File:Blank.jpg|Shoulder Bells|
+
{{CRLtemplate-nolevels|File:Coruscant_Guard_Shoulders.jpg|Shoulder Armor|
-
* Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
+
*Animated Phase I Shoulder Armor.
-
* The edges of the shoulders should outlined by a dark scarlet line. The line is about 2 inches wide along the bottom of the shoulder and about 1 inch wide around the rest of the shoulder.|
+
*Armor is painted matte or satin white with dark scarlet detail.
-
* Shoulder bells must be weathered.| }}
+
*Armor has dark scarlet border that rings around the shoulder edges.
 +
**Dark scarlet bottom edge is about 2 inches wide.
 +
**Dark scarlet side and top edge is about 1 inch wide.
 +
*Scuff marks on dark scarlet expose underlying white.
 +
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:Blank.jpg|Upper Arm Armor|
+
{{CRLtemplate-nolevels|File:Coruscant_Guard_Biceps.jpg|Upper Arm Armor|
-
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
+
*Armor is painted matte or satin white.
-
*On the back of the biceps, there is what appears to be a dark scarlet upsidedown "Y". Consult reference images for more details.
+
*Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
*Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
-
*Armor must be seamless. No visible traces of how the armor was assembled should be shown. |
+
*Painted on the back of the arm, there is a dark scarlet upside-down "Y" shape which tapers to point on each side of the armor.
-
*Armor must be weathered. |}}
+
*Armor is seamless.
 +
**No visible traces of how the armor was assembled are shown.
 +
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:Blank.jpg|Forearm Armor|
+
{{CRLtemplate-onelevel|File:Coruscant_Guard_Forearms.jpg|Forearm Armor|
-
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
+
*Animated Phase I Forearm Armor.
-
*Left forearm must have a compad painted white that has 4 main square recessed areas and 1 slightly smaller square recessed area. The smaller recess is closest to the elbow.
+
*Armor is painted matte or satin white with dark scarlet detail.
-
*Armor must be seamless on the outside edge. Due to the shape of the armor, a butted seam is acceptable on the inside if required.
+
*Lower portion of elbow section is dark scarlet and forms an upward pointed arrow that comes to a peak at the center of the elbow.
 +
*Left forearm has a compad with (4) main square recessed areas and (1) slightly smaller square recessed area.
 +
**The smaller recess is closest to the elbow.
 +
*Armor is seamless on the outside edge.
 +
**Due to the shape of the armor, a butted seam is acceptable on the inside if required.
*Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
*Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
-
*Elbow plate is painted matte or satin white. |
+
*Armor is weathered with shades of grey.
-
* Armor must be seamless. No visible traces of how the armor was assembled should be shown.
+
*Scuff marks on dark scarlet expose underlying white.|
-
* Armor must be weathered. | }}
+
*Armor is seamless.
 +
**No visible traces of how the armor was assembled are shown.|}}
-
 
+
{{CRL-TC_animated_handplates}}
-
{{CRLtemplate|File:Blank.jpg|Hand Plates|
+
-
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
+
-
*Hand plates are mirror images of each other. |
+
-
* Armor must be weathered. | }}
+
{{CRL-generic_black_gloves}}
{{CRL-generic_black_gloves}}
-
{{CRLtemplate|File:Blank.jpg|Chest Armor|
+
{{CRLtemplate-nolevels|File:Coruscant_Guard_Chest.jpg|Chest Armor|
-
*Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
+
*Animated Phase I Chest Armor.
 +
*Armor is painted matte or satin white with dark scarlet detail.
 +
*Dark scarlet detail is centered on the lower portion of the chest.
 +
**Center detail between raised chest and curved notch forms the Symbol of the Galactic Senate with detail pattern lines that extend to sides.
 +
**Lines on sides parallel below raised chest, then expand and flare outward along sides.
*Lower portion of the chest has a curved notch for the abdomen armor to fit into.
*Lower portion of the chest has a curved notch for the abdomen armor to fit into.
-
*The Symbol of the Galactic Senate is painted in dark scarlet on the center of chest, with the center of the symbol at the top of the curved notch.
+
*Chest and back plate match together at the sides and shoulders with no open gap.
-
*Extending out from the Senate symbol is a dark scarlet line that moves towards the back armor and expands in size. The line sits under the breast portion of the armor. Consult reference images for more detail.
+
**Butted seam lines are permitted if required.
-
*Chest and back plate must match together at the sides and shoulders with no gap. Butted seam lines are permitted if required.  
+
*Shoulder straps are placed over the chest and back armor at the seams.
-
*Matte or satin white shoulder straps must be placed over the chest and back armor at the seams. |
+
**Shoulder straps are painted matte or satin white.
-
*Armor must be weathered. | }}
+
*Scuff marks on dark scarlet expose underlying white.
 +
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:Blank.jpg|Back Armor|
+
{{CRLtemplate-nolevels|File:Coruscant_Guard_Back.jpg|Back Armor|
-
*Armor must be matte or satin white. If weathered, the weathering should be shades of grey.  
+
*Animated Phase I Back Armor.
-
*A two-inch dark scarlet stripe extends from the chest below the arm and ending just on either side of the rear tank.
+
*Armor is painted matte or satin white with dark scarlet detail.
-
*Rear tank has detailed area that contains a O11 pattern similar to a stormtrooper.
+
*Dark scarlet stripe continues from chest sides and extends back in about 2 inch wide stripe and ends at sides of back box.
-
*Matte or satin white shoulder straps should be placed over the chest and back armor at the seams. |
+
*Back box detail area contains a O11 pattern.
-
*Back armor must be weathered. | }}
+
*Shoulder straps are placed over the chest and back armor at the seams.
 +
**Shoulder straps are painted matte or satin white.
 +
*Armor is weathered with shades of grey.
 +
*Scuff marks on dark scarlet expose underlying white.||}}
-
{{CRLtemplate|File:Blank.jpg|Ab Armor|
+
{{CRLtemplate-nolevels|File:Coruscant_Abdomen.jpg|Abdomen Armor|
-
*Armor must be matte or satin white. If weathered, the weathering should be shades of grey.
+
*Animated Phase I Abdomen Armor.
-
*The Ab armor shall have the bottom portion of the Galactic Senate symbol in the center extending down the abs to the belt. Consult reference images for more detail. |
+
*Armor is painted matte or satin white with dark scarlet detail.
-
Ab armor must be weathered.  | }}
+
*Dark scarlet aligns with chest detail and forms a vertical stripe that narrows toward the bottom.
 +
*Armor is weathered with shades of grey.
 +
*Scuff marks on dark scarlet expose underlying white.||}}
{{CRL-TC_animated_kidney}}
{{CRL-TC_animated_kidney}}
-
{{CRL-TC_animated_cod}}
+
{{CRLtemplate-nolevels|File:Coruscant_Guard_Codpiece.jpg|Codpiece and Belt front|
-
 
+
*Animated Phase I Codpiece and Belt.
-
{{CRL-TC_animated_butt}}
+
*Armor is painted matte or satin white with dark scarlet belt boxes.
 +
*Belt is approx 3" tall and divided into 1.75" wide segments.
 +
*Front belt segments have a key/slot detail.
 +
*A dark scarlet belt box is mounted on each side of belt.
 +
*Cod and Posterior armor are connected at the hips.
 +
**Butted seams are permitted at this connection if required.
 +
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:Blan.gif|Belt Boxes|
+
{{CRLtemplate-onelevel|File:Coruscant_Guard_Posterior.jpg|Posterior Armor, Belt rear and Detonator|
-
*Armor must be painted dark scarlet. If weathered, the weathering should be shades of grey.
+
*Armor is painted matte or satin white.
-
*2 rectangular boxes are mounted at the hips. The top edge of the box is tapered town toward the outside. There is an inset detail near the top of each box. |
+
*Belt is approx 3" tall and divided into 1.75" wide segments.
-
*Armor must be weathered. | }}
+
*Codpiece and Posterior armor connect at the hips.
 +
**Butted seams are permitted at this connection if required.
 +
*Detonator is centered on the back of belt.
 +
**Detonator has no control buttons.
 +
**The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
 +
***Lines may be recessed or painted on.
 +
*Scuff marks on dark scarlet expose underlying white.
 +
*Armor is weathered with shades of grey.|
 +
*Detonator lines are recessed.|}}
 +
{{CRLtemplate-nolevels|File:Shocktrooper_Beltbox_Animated.jpg|Belt Boxes|
 +
*Animated Phase I Belt Boxes.
 +
*Belt boxes are matte or satin white with dark scarlet overlaid over entire box.
 +
*Two rectangular boxes are mounted to belt with one on each side.
 +
*There is an inset upside down “U” detail near the top of each box.
 +
*Scuff marks on dark scarlet expose underlying white.
 +
*Armor is weathered with shades of grey.||}}
{{CRL-TC_animated_thighs}}
{{CRL-TC_animated_thighs}}
-
{{CRLtemplate|File:Blank.jpg|Lower Leg Armor|
+
{{CRLtemplate-nolevels|File:Coruscant_Guard_Shins.jpg|Lower Leg Armor|
-
*Armor must be painted matte or satin white with a dark scarlet stripe that wraps around the calf about 2" below the top of the armor and continues down the front center of the armor. Consult reference images for more detail. If weathered, the weathering should be shades of grey.
+
*Animated Phase I Lower Leg Armor.
-
*Knee armor painted white and is integrated with the lower leg.
+
*Armor is painted matte or satin white with dark scarlet detail.
-
*Knee armor has an inverted dark scarlet triangle painted down the center.
+
*Shin area has a dark scarlet “Y” pattern in front that creates a complete loop around the back calf.
-
*The armor should have a flat center triangle below the knee plate, with the single point facing downward.
+
**Front of “Y” narrows as it extends down the front ridge of lower leg.
-
*The calf detail of the armor has a ridge wrapping around the back of the leg.
+
**At the bottom of the “Y” pattern, a small perpendicular stripe forms the base edge of pattern.
-
*Due to the shape of the armor, a butted seam is permitted on the inside or back of the shin. |
+
*Knee armor is integrated with the lower leg.
-
*Armor must be weathered. | }}
+
**An inverted dark scarlet triangle extends the full length of front flat surface of the knee.
 +
*The armor has a flat center triangle below the knee plate.
 +
*The calf detail of the armor has a ridge wrapping around the back of the leg.  
 +
**Due to the shape of the armor, a butted seam is permitted on the inside or back of the leg.
 +
*Scuff marks on dark scarlet expose underlying white.
 +
*Armor is weathered with shades of grey.||}}
{{CRL-TC_animated_boots}}
{{CRL-TC_animated_boots}}

Latest revision as of 04:53, 29 July 2014

crlblackhd.gif
Coruscant Guard
Coruscant Guard.jpg
Model TC 8916, Photo by Michael H.


Clone-Trooper-Detachment.png

Description: Coruscant Guard
Prefix: TC
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Seasons 1-3

The prestigious Coruscant Guard is a specialized division of the Grand Army of the Republic stationed on the capital planet of Coruscant. The Coruscant Guard is responsible for guarding and protecting vital infrastructure and government buildings as well as providing escort duty for Galactic Senate members and other dignitaries on diplomatic missions.


The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
  • Any uncertainties or questionable aspects of the submitted costume should be brought to the appropriate DL/GML peer review section of the legion forum.
Required Costume Components

The following costume components are present and appear as described below.

Coruscant Guard Helmet.jpg Helmet
For 501st approval:
  • Animated Phase I style helmet.
    • Movie style helmets are not combined with animated armor.
  • Helmet is painted matte or satin white with dark scarlet detail.
  • Narrow fin on dome.
  • A dark scarlet line, about 1 inch wide, wraps around the entire dome just above brow band.
  • Two dark scarlet diamonds are aligned vertically and centered on the front of the helmet.
    • Upper dark scarlet diamond is centered above the brow band between the scarlet line and front starting edge of fin. Bottom point is part of the scarlet line.
    • Lower dark scarlet diamond is centered below the frown and continues down to align with chin opening. Bottom point is not visible due to chin opening.
  • A black eye lens extends down through the entire frown area.
  • (4) Vents on each side of helmet.
    • Vent indents may be painted black or grey, or cut out and filled with black mesh.
  • A grey indented helmet band runs around back of dome.
  • Raised white circle at the back center of the helmet.
  • Scuff marks on dark scarlet expose underlying white.
  • Armor is weathered with shades of grey.



TC animated neckseal.jpg Neck Seal
For 501st approval:
  • Neck seal is black in color with no ribbing.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.
For level two certification (if applicable):
  • Neck seal closes in the front via 2 small black snaps.


TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


Coruscant Guard Shoulders.jpg Shoulder Armor
For 501st approval:
  • Animated Phase I Shoulder Armor.
  • Armor is painted matte or satin white with dark scarlet detail.
  • Armor has dark scarlet border that rings around the shoulder edges.
    • Dark scarlet bottom edge is about 2 inches wide.
    • Dark scarlet side and top edge is about 1 inch wide.
  • Scuff marks on dark scarlet expose underlying white.
  • Armor is weathered with shades of grey.


Coruscant Guard Biceps.jpg Upper Arm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
  • Painted on the back of the arm, there is a dark scarlet upside-down "Y" shape which tapers to point on each side of the armor.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Armor is weathered with shades of grey.


Coruscant Guard Forearms.jpg Forearm Armor
For 501st approval:
  • Animated Phase I Forearm Armor.
  • Armor is painted matte or satin white with dark scarlet detail.
  • Lower portion of elbow section is dark scarlet and forms an upward pointed arrow that comes to a peak at the center of the elbow.
  • Left forearm has a compad with (4) main square recessed areas and (1) slightly smaller square recessed area.
    • The smaller recess is closest to the elbow.
  • Armor is seamless on the outside edge.
    • Due to the shape of the armor, a butted seam is acceptable on the inside if required.
  • Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
  • Armor is weathered with shades of grey.
  • Scuff marks on dark scarlet expose underlying white.
For level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.


TC animated handplates.jpg Hand Plates
For 501st approval:
  • Armor is painted matte or satin white.
  • Hand plates are mirror images of each other.
  • Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
  • Armor is weathered with shades of grey.



Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.


Coruscant Guard Chest.jpg Chest Armor
For 501st approval:
  • Animated Phase I Chest Armor.
  • Armor is painted matte or satin white with dark scarlet detail.
  • Dark scarlet detail is centered on the lower portion of the chest.
    • Center detail between raised chest and curved notch forms the Symbol of the Galactic Senate with detail pattern lines that extend to sides.
    • Lines on sides parallel below raised chest, then expand and flare outward along sides.
  • Lower portion of the chest has a curved notch for the abdomen armor to fit into.
  • Chest and back plate match together at the sides and shoulders with no open gap.
    • Butted seam lines are permitted if required.
  • Shoulder straps are placed over the chest and back armor at the seams.
    • Shoulder straps are painted matte or satin white.
  • Scuff marks on dark scarlet expose underlying white.
  • Armor is weathered with shades of grey.


Coruscant Guard Back.jpg Back Armor
For 501st approval:
  • Animated Phase I Back Armor.
  • Armor is painted matte or satin white with dark scarlet detail.
  • Dark scarlet stripe continues from chest sides and extends back in about 2 inch wide stripe and ends at sides of back box.
  • Back box detail area contains a O11 pattern.
  • Shoulder straps are placed over the chest and back armor at the seams.
    • Shoulder straps are painted matte or satin white.
  • Armor is weathered with shades of grey.
  • Scuff marks on dark scarlet expose underlying white.


Coruscant Abdomen.jpg Abdomen Armor
For 501st approval:
  • Animated Phase I Abdomen Armor.
  • Armor is painted matte or satin white with dark scarlet detail.
  • Dark scarlet aligns with chest detail and forms a vertical stripe that narrows toward the bottom.
  • Armor is weathered with shades of grey.
  • Scuff marks on dark scarlet expose underlying white.



TC animated grunt kidney.jpg Kidney Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Kidney and abdomen armor connect at the sides with no open gap.
    • A butted seam between the kidney and abdomen armor is acceptable.
  • Armor is weathered with shades of grey.


Coruscant Guard Codpiece.jpg Codpiece and Belt front
For 501st approval:
  • Animated Phase I Codpiece and Belt.
  • Armor is painted matte or satin white with dark scarlet belt boxes.
  • Belt is approx 3" tall and divided into 1.75" wide segments.
  • Front belt segments have a key/slot detail.
  • A dark scarlet belt box is mounted on each side of belt.
  • Cod and Posterior armor are connected at the hips.
    • Butted seams are permitted at this connection if required.
  • Armor is weathered with shades of grey.


Coruscant Guard Posterior.jpg Posterior Armor, Belt rear and Detonator
For 501st approval:
  • Armor is painted matte or satin white.
  • Belt is approx 3" tall and divided into 1.75" wide segments.
  • Codpiece and Posterior armor connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Detonator is centered on the back of belt.
    • Detonator has no control buttons.
    • The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
      • Lines may be recessed or painted on.
  • Scuff marks on dark scarlet expose underlying white.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Detonator lines are recessed.
Shocktrooper Beltbox Animated.jpg Belt Boxes
For 501st approval:
  • Animated Phase I Belt Boxes.
  • Belt boxes are matte or satin white with dark scarlet overlaid over entire box.
  • Two rectangular boxes are mounted to belt with one on each side.
  • There is an inset upside down “U” detail near the top of each box.
  • Scuff marks on dark scarlet expose underlying white.
  • Armor is weathered with shades of grey.



TC animated thighs.jpg Thigh Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
  • From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
  • The upper outer edge has an angled section.
  • The armor is weathered with shades of grey.
For level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
Coruscant Guard Shins.jpg Lower Leg Armor
For 501st approval:
  • Animated Phase I Lower Leg Armor.
  • Armor is painted matte or satin white with dark scarlet detail.
  • Shin area has a dark scarlet “Y” pattern in front that creates a complete loop around the back calf.
    • Front of “Y” narrows as it extends down the front ridge of lower leg.
    • At the bottom of the “Y” pattern, a small perpendicular stripe forms the base edge of pattern.
  • Knee armor is integrated with the lower leg.
    • An inverted dark scarlet triangle extends the full length of front flat surface of the knee.
  • The armor has a flat center triangle below the knee plate.
  • The calf detail of the armor has a ridge wrapping around the back of the leg.
    • Due to the shape of the armor, a butted seam is permitted on the inside or back of the leg.
  • Scuff marks on dark scarlet expose underlying white.
  • Armor is weathered with shades of grey.



TC animated boots.jpg Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
  • Boots are lace-less and have flat soles.
  • Boots have a center strip running from the toe to the ankle.
  • A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.
For level two certification (if applicable):
  • Boots have accurate notched sole.
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.


CRLdc15s-animated.jpg DC-15S Blaster Carbine (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.

  • This is the animated variant of the DC-15S blaster rifle.



Dc15a Animated.jpg DC-15A Blaster Rifle (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.

  • This is the animated variant of the DC-15A blaster rifle.


This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:TC_-_Coruscant_Guard_phase_1

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.