(Difference between revisions)
 
(22 intermediate revisions not shown)
Line 1: Line 1:
-
{{CRLheader|Scout Trooper|File:TB_bikerscout_full.jpg|TB-4468|Michelle Chan}}
+
{{CRLheader|Scout Trooper|File:TB_bikerscout_full.jpg|TB 4468|Michelle Chan}}
-
{{CRLdetinfo| 1103 |Scout Trooper|TB|Episode VI: Return of the Jedi|Trained to operate in all conditions, Scout Troopers are the Imperial Army's advance eyes in any situation. Sometimes called Biker Scouts for their primary method of transport, the Aratech 74-Z Speeder Bike, Scouts have been deployed in theaters ranging from the sub-freezing temperatures of Hoth to the temperate climates of the moon of Endor. }}
+
{{CRLdetinfo| 1103 |Scout Trooper|TB|Episode VI: Return of the Jedi|
 +
 
 +
Trained to operate in all conditions, Scout Troopers are the Imperial Army's advance eyes in any situation. Sometimes called Biker Scouts for their primary method of transport, the Aratech 74-Z Speeder Bike, Scouts have been deployed in theaters ranging from the sub-freezing temperatures of Hoth to the temperate climates of the moon of Endor.}}
{{CRLgmlapproval}}
{{CRLgmlapproval}}
Line 15: Line 17:
**replace stock bolts with flat-disc "elevator" bolts
**replace stock bolts with flat-disc "elevator" bolts
**replace inaccurate aerator.  
**replace inaccurate aerator.  
-
*Fan-made helmets are acceptable as long as they remain true to shape of original screen accurate helmet.| | }}
+
*Fan-made helmets are acceptable as long as they remain true to shape of original screen accurate helmet.|
 +
*Chin cup is present.
 +
*No mesh material mounted in the ears.
 +
*Details are the correct color and placed as shown.|}}
{{CRLgeneric-balaclava}}
{{CRLgeneric-balaclava}}
-
{{CRLtemplate-onelevel|File:TB_scout_shoulders.jpeg|Shoulders|
+
{{CRLtemplate-onelevel|File:TB_scout_flightsuit.jpeg|Flight Suit|
 +
* See the [[Costuming:TB_scout_trooper-suitdetail|Scout Trooper Flight Suit]] page for detailed images of the patches described below.
 +
* The undersuit is a one or two-piece black textile suit, such as military flightsuits, motorcycle racing suits, industrial work clothing (Dickies), or similar suit modified appropriately.
 +
*Must have a suede or faux suede butt flap attached above the waist hidden by the cummerbund, rectangle in shape. The flap is slightly narrower than the width of the trooper and stop slightly higher than the bottom edge of the troopers backside.
 +
* Suede or faux suede thigh patches must be present, extending over the flight suit crotch and down the front finishing above the knee armor. The thigh patches must be secured by 50mm  (2") black elastic, sewn in under the front and back of the thigh patch.
 +
*Suit must not have any visible labels, logos or zippers (including built in flight suit pockets).|
 +
*Real suede is used, and the suit is fairly fitted and not baggy.|}}
 +
 
 +
{{CRLtemplate-onelevel|File:TB_scout_shoulders.jpeg|Shoulder Armor|
*Gloss white, semi-gloss, or lightly weathered.  
*Gloss white, semi-gloss, or lightly weathered.  
*Black Elastic is used to secure the armor around upper arm.  
*Black Elastic is used to secure the armor around upper arm.  
-
*They do not have any adornment.|| }}
+
*They do not have any adornment.|
 +
*Armor is secured around bicep with a 35mm ( 1 & 3/8") black elastic strap.
 +
**Note: The shape of the film armor often curves on the bottom edge).|}}
-
{{CRLtemplate-onelevel|File:TB_scout_biceps.jpeg|Upper Arms|
+
{{CRLtemplate-onelevel|File:TB_scout_biceps.jpeg|Upper Arm Armor|
*Gloss white, semi-gloss or lightly weathered.  
*Gloss white, semi-gloss or lightly weathered.  
-
*Have a recessed area with a "t-bit" detail attached within.  
+
*Armor has a recessed area with a "t-bit" detail attached within.  
-
*Black elastic is used to secure the armor around upper arm.||}}
+
*Black elastic is used to secure the armor around upper arm.|
 +
*Film-accurate "T-bit" detail is mounted to armor.
 +
*T-bit circle detail piece faces forward on each arm.
 +
*Armor is secured around the arm with a 35mm ( 1 & 3/8") black elastic strap.|}}
-
{{CRLtemplate-onelevel|File:TB_scout_forearms.jpeg|Forearms|
+
{{CRLtemplate-onelevel|File:TB_scout_forearms.jpeg|Forearm Armor|
-
* Gloss white, semi-gloss or lightly weathered.  
+
*Gloss white, semi-gloss or lightly weathered.  
-
* Black elastic is used to secure the armor around forearm.||}}
+
*Black elastic is used to secure the armor around forearm.|
 +
*Armor is secured around the arm with a 25mm ( 1") black elastic strap.|}}
-
{{CRLtemplate-onelevel|File:TB_scout_gloves.jpeg|Gloves|
+
{{CRLtemplate-nolevels|File:TB_scout_gloves.jpeg|Gloves|
*Black leather and gauntlet length.  
*Black leather and gauntlet length.  
-
*Detailed gloves that include-
+
*Detailed gloves include:
-
*Black suede or faux suede patches on top of the middle finger, index   finger and thumb.
+
**Black suede or faux suede patches on top of the middle finger, index finger, and thumb.
-
*Four tightly spaced ribs that span the knuckles.
+
**Four tightly spaced ribs that span the knuckles.
-
*Should have no labels/logos, clips or external straps.||}}
+
*There are no labels/logos, clips, or external straps.||}}
 +
{{CRLtemplate-onelevel|File:TB_scout_vest.jpg|Vest|
 +
*Made out of black, matt finish, heavy weight cotton fabric.
 +
*Sleeves are padded and contain ribbing similar to the front of the cummerbund.
 +
*The sleeves end just slightly longer  than the bottom edge of the shoulder armor.
 +
*Vest has a much wider neck opening than the flight suit.
 +
*Secured at the back using 50mm (2") black hook and loop fastener.|
 +
*The vest is separate from the flight suit and cummerbund.|}}
-
{{CRLtemplate-onelevel|File:TB_scout_chest.jpeg|Chest|
+
{{CRLtemplate-onelevel|File:TB_scout_chest.jpeg|Chest Armor|
-
* Gloss white, semi-gloss or weathered.  
+
*Gloss white, semi-gloss or weathered.  
*There is a recessed rectangular area present over the right breast that is painted a medium to dark gray.  
*There is a recessed rectangular area present over the right breast that is painted a medium to dark gray.  
-
*The chest armor and back plate should be joined together over the shoulder and the gap covered with a loop of white fabric.  
+
*The chest and back armor join together over the shoulder and the gap covered with a loop of white fabric.
-
*The sides of the chest armor are attached to the back plate by white elastic.||}}
+
*The sides of the chest armor are attached to the back armor with white elastic.|
 +
*Shoulder bridge straps, attaching the front and back of the armor, are made of white cotton webbing.
 +
**Not Nylon.
 +
*Side under arm chest/back straps are made from 50mm (2") white webbing.
 +
**Optional: Straps may be off-white if using off white pouches/drop box straps.
 +
**Optional: 50mm white elastic material is acceptable provided the color matches.|}}
-
{{CRLtemplate-onelevel|File:TB_scout_back.jpeg|Back|
+
{{CRLtemplate-onelevel|File:TB_scout_back.jpeg|Back Armor|
*Gloss white, semi-gloss or weathered.  
*Gloss white, semi-gloss or weathered.  
-
* The back plate has a tank attached.  
+
*The back armor has a center tank attached.
-
**The top of the tank is flat with a detail piece painted black, and must use the same [[Glossary#Greeblie|greeblies]] as what is seen on screen. There is also a white painted circle and red line detail to be included.
+
*The top of the tank is flat with a detail piece painted black.
 +
**Top detail piece uses the same [[Glossary#Greeblie|greeblies]] as seen on the seen used armor.
 +
**Top detail piece has a white painted circle and red line detail.
**The tank has a black stripe detail.  
**The tank has a black stripe detail.  
-
**Scouts may have additional "rank indicators" that are present on the right side of the tank and can number anywhere from 0 to 6 stripes.||}}
+
**Optional: Additional "rank indicators", present on the right side of the tank, can number between 0 to 6 stripes.|
-
 
+
*Bullet tank on the back armor has film-accurate greeblie tank topper detail.
-
{{CRLtemplate-onelevel|File:TB_scout_flightsuit.jpeg|Flight Suit|
+
*Tank topper is a separate greeblie to the tank itself.
-
* See the [[Costuming:TB_scout_trooper-suitdetail|Scout Trooper Flight Suit]] page for detailed images of the patches described below.
+
*Tank topper is secured with single metal colored rivet in the center of the greeblie.
-
* The undersuit is a one or two-piece black textile suit, such as military flightsuits, motorcycle racing suits, industrial work clothing (Dickies), or similar suit modified appropriately.
+
**Rear tank has properly placed pin striping and a single bottom attachment rivet.|}}
-
*Must have a suede or faux suede butt flap attached above the waist hidden by the cummerbund, rectangle in shape. The flap should be slightly narrower than the width of the trooper and stop slightly higher than the bottom of the troopers butt cheeks.
+
-
* Suede or faux suede thigh patches must be present, extending over the flight suit crotch and down the front finishing above the knee armor. The thigh patches must be secured by 50mm  (2") black elastic, sewn in under the front and back of the thigh patch.
+
-
*Suit must not have any visible labels, logos or zippers (including built in flight suit pockets)||}}
+
-
 
+
-
{{CRLtemplate-onelevel|File:TB_scout_vest.jpg|Vest|
+
-
*Made out of black matt finish heavy weight cotton fabric.
+
-
*Sleeves should be padded and contain ribbing similar to the front of the cummerbund, the sleeves should end just slightly longer  than the bottom edge of the shoulder armor.
+
-
*Must have a much wider neck opening than the flight suit
+
-
*Secured at the back using 50mm (2") black velcro.||}}
+
{{CRLtemplate-onelevel|File:TB_scout_cummerbund.jpeg|Cummerbund|
{{CRLtemplate-onelevel|File:TB_scout_cummerbund.jpeg|Cummerbund|
*White or lightly weathered.  
*White or lightly weathered.  
-
*Made out of white matt heavy weight cotton fabric and closes in back with 50mm (2") velcro.  
+
*Made from matt white, heavy weight cotton fabric.
-
*Should sit from just under the chest armor down to the waist.  
+
*Closes in back with 50mm (2") hook and loop fastener.  
-
*There should be no gap between the belt and cummerbund.  
+
*Extends from just under the chest armor down to the waist.  
-
*Has a tapered crotch with inverted curve sewn in detail, made from the same material and sits between the legs and connects to the back of the cummerbund by a 50mm (2") black elastic strap.  
+
*There sis no gap between the belt and cummerbund.  
-
*Has 6 or 7 (troopers choice) vertical stitch lines producing 5 or 6 raised ribs of equal width stitched into the front between where two fabric pouches are connected.
+
*Has a tapered cod section with inverted curve sewn in detail.
-
*Pouches may be white or off-white.||}}
+
**Made from the same material.
 +
*Connects between the legs to the back of the cummerbund by a 50mm (2") black elastic strap.
 +
*Front of cummerbund has 6 to 7 (trooper's choice) vertical stitch lines, centered between the two fabric pouches, producing 5 to 6 raised ribs of equal width.  
 +
*Pouches are white or off-white.|
 +
*The cummerbund is separate from the flight suit and vest.
 +
*There is no visible external edge stitching on the cod or pouch flaps.|}}
-
{{CRLtemplate-onelevel|File:TB_scout_belt.jpeg|Belt|
+
{{CRLtemplate-onelevel|File:TB_scout_belt.jpeg|Belt and Detonator|
*Gloss white, semi-gloss or lightly weathered.  
*Gloss white, semi-gloss or lightly weathered.  
-
*The front and two "boxes" of the belt are made out of plastic.  
+
*The front and two "boxes" of the belt are made of plastic.  
-
*The rest of the belt that fastens at the back of the waist is made out a textile material.  
+
*The remainder of the belt that fastens at the back of the waist, is made from a textile material (webbing).
-
*The back of the belt has a rectangular thermal detonator box with short grey corrigated hose.
+
*Hanging from the sides of the belt are hip boxes (drop boxes).
-
*The correct thermal detonator [[Glossary#Greeblie|greeblies]] must be attached to the box, the rectangular part of the TD [[Glossary#Greeblie|greeblie]] is the same as used in the rebel endor troopers rank badge, which is fixed on the left side of the TD, on the right the same round [[Glossary#Greeblie|greeblie]] as what is used on the scouts tank topper. See the [[Costuming:TB_Scout_trooper-detonator|detonator detail]] page for a close up image of the [[Glossary#Greeblie|greeblies]].  
+
**Drop boxes are also made from plastic.
-
*Hanging from the sides of the belt are hip boxes, also made out of plastic. These are connected to the belt by textile straps.|| }}
+
**Drop boxes are connected to the belt via white textile straps.
 +
***If using off-white Cummerbund pouches and side straps, the drop box straps are also off-white.
 +
*Attached to the The back of the belt is a rectangular thermal detonator box with short grey corrugated hose.
 +
*The correct thermal detonator [[Glossary#Greeblie|greeblies]] are attached to the box.
 +
**The rectangular part of the thermal detonator [[Glossary#Greeblie|greeblie]], fixed on the left side of the detonator, is the same as used in the rebel Endor trooper rank badge.
 +
**On the right hand side is the same round [[Glossary#Greeblie|greeblie]] as used on the Scout tank topper.
 +
**See the [[Costuming:TB_Scout_trooper-detonator|detonator detail]] page for a close up image of the [[Glossary#Greeblie|greeblies]].|
 +
*Belt is one piece or made to look like one piece with no rivets, apart from one on each side to secure the fabric belt.
 +
*Drop boxes hang at the correct distance from the belt.|}}
-
{{CRLtemplate-onelevel|File:TB_scout_knees.jpeg|Knees|
+
{{CRLtemplate-onelevel|File:TB_scout_knees.jpeg|Knee Armor|
*Gloss white, semi-gloss or lightly weathered.  
*Gloss white, semi-gloss or lightly weathered.  
-
*Black elastic is used to secure the armor around the leg.||}}
+
*Black elastic is used to secure the armor around the leg.|
 +
*Knee armor has two elastic straps:
 +
**The first is 25mm (1") wide and passes through the bottom of the knee armor.
 +
**The second is 12mm (1/2") wide and riveted to the top sides of the knee armor
 +
***Rivet remains silver in color.|}}
{{CRLtemplate-onelevel|File:TB_scout_boots.jpeg|Boots|
{{CRLtemplate-onelevel|File:TB_scout_boots.jpeg|Boots|
*White or lightly weathered.  
*White or lightly weathered.  
-
*The soles of the boot should be tan while the rest of the boot should be white.  
+
*The soles of the boot are tan.  
-
*There is a dog bone shaped strap that covers the bridge of the foot.  
+
*A "dog bone" shaped strap covers the bridge of the foot.  
-
*The boots are secured up the back using 25mm (1") white velcro closure.
+
*The boots are secured up the back using 25mm (1") white hook and loop fastener.
-
*The calf should come up just slightly underneath the bottom of the knee armor.||}}
+
*The calf of the boot rises to just slightly underneath the bottom of the knee armor.|
 +
*The boots have slots cut into the heels as seen on film.
 +
*The boot sole is a single color with no visible stitching.|}}
{{CRLtemplate-onelevel|File:TB_scout_holster.jpeg|Holster|
{{CRLtemplate-onelevel|File:TB_scout_holster.jpeg|Holster|
*Gloss white, semi-gloss or lightly weathered.  
*Gloss white, semi-gloss or lightly weathered.  
-
*Attached to the outside right side of the right boot by rivets, not straps.  
+
*Attached to the outside right side of the right boot with rivets.
-
* The blaster pistol should fit in the holster.||}}
+
**Not straps.
 +
*The blaster pistol fits into the holster.|
 +
*Attached with four silver colored rivets.|}}
{{CRLaccessories}}
{{CRLaccessories}}
{{CRLtemplate-onelevel|File:TB_scout_pistol.jpeg|Hold-out Blaster|
{{CRLtemplate-onelevel|File:TB_scout_pistol.jpeg|Hold-out Blaster|
-
*Flat black, semi-gloss or slightly weathered.  
+
*Flat or semi-gloss black.
-
*The pistol should not have any visible trigger, labels or logos.||}}
+
*Blaster does not have any visible trigger.
 +
*Blaster is lightly weathered.|
 +
*The scope has lens discs cut into the scope for a more realistic appearance.
 +
*No decals representing cross hairs or similar.|}}
{{CRLfooter|BSN_CRL|T}}
{{CRLfooter|BSN_CRL|T}}

Latest revision as of 16:59, 1 June 2014

crlblackhd.gif
Scout Trooper
TB bikerscout full.jpg
Model TB 4468, Photo by Michelle Chan


Pathfinders.png

Description: Scout Trooper
Prefix: TB
Detachment: PathFinders
Context: Episode VI: Return of the Jedi

Trained to operate in all conditions, Scout Troopers are the Imperial Army's advance eyes in any situation. Sometimes called Biker Scouts for their primary method of transport, the Aratech 74-Z Speeder Bike, Scouts have been deployed in theaters ranging from the sub-freezing temperatures of Hoth to the temperate climates of the moon of Endor.


This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
  • Any uncertainties or questionable aspects of the submitted costume should be brought to the appropriate DL/GML peer review section of the legion forum.
Required Costume Components

The following costume components are present and appear as described below.

TB scout helmet.jpeg Helmet
For 501st approval:
  • Gloss white, semi-gloss, or lightly weathered.
  • Licensed helmets are acceptable with modifications:
    • remove the manufacturer logo
    • replace stock lens
    • replace inaccurate "fish-hook" logo
    • replace stock bolts with flat-disc "elevator" bolts
    • replace inaccurate aerator.
  • Fan-made helmets are acceptable as long as they remain true to shape of original screen accurate helmet.
For level two certification (if applicable):
  • Chin cup is present.
  • No mesh material mounted in the ears.
  • Details are the correct color and placed as shown.


Generic Balaclava.jpg Balaclava
For 501st approval:
  • A balaclava is a black head sock/hood that is worn under the helmet and is used primarily to hide any view of the wearer's skin and/or facial hair.


TB scout flightsuit.jpeg Flight Suit
For 501st approval:
  • See the Scout Trooper Flight Suit page for detailed images of the patches described below.
  • The undersuit is a one or two-piece black textile suit, such as military flightsuits, motorcycle racing suits, industrial work clothing (Dickies), or similar suit modified appropriately.
  • Must have a suede or faux suede butt flap attached above the waist hidden by the cummerbund, rectangle in shape. The flap is slightly narrower than the width of the trooper and stop slightly higher than the bottom edge of the troopers backside.
  • Suede or faux suede thigh patches must be present, extending over the flight suit crotch and down the front finishing above the knee armor. The thigh patches must be secured by 50mm (2") black elastic, sewn in under the front and back of the thigh patch.
  • Suit must not have any visible labels, logos or zippers (including built in flight suit pockets).
For level two certification (if applicable):
  • Real suede is used, and the suit is fairly fitted and not baggy.
TB scout shoulders.jpeg Shoulder Armor
For 501st approval:
  • Gloss white, semi-gloss, or lightly weathered.
  • Black Elastic is used to secure the armor around upper arm.
  • They do not have any adornment.
For level two certification (if applicable):
  • Armor is secured around bicep with a 35mm ( 1 & 3/8") black elastic strap.
    • Note: The shape of the film armor often curves on the bottom edge).
TB scout biceps.jpeg Upper Arm Armor
For 501st approval:
  • Gloss white, semi-gloss or lightly weathered.
  • Armor has a recessed area with a "t-bit" detail attached within.
  • Black elastic is used to secure the armor around upper arm.
For level two certification (if applicable):
  • Film-accurate "T-bit" detail is mounted to armor.
  • T-bit circle detail piece faces forward on each arm.
  • Armor is secured around the arm with a 35mm ( 1 & 3/8") black elastic strap.
TB scout forearms.jpeg Forearm Armor
For 501st approval:
  • Gloss white, semi-gloss or lightly weathered.
  • Black elastic is used to secure the armor around forearm.
For level two certification (if applicable):
  • Armor is secured around the arm with a 25mm ( 1") black elastic strap.
TB scout gloves.jpeg Gloves
For 501st approval:
  • Black leather and gauntlet length.
  • Detailed gloves include:
    • Black suede or faux suede patches on top of the middle finger, index finger, and thumb.
    • Four tightly spaced ribs that span the knuckles.
  • There are no labels/logos, clips, or external straps.


TB scout vest.jpg Vest
For 501st approval:
  • Made out of black, matt finish, heavy weight cotton fabric.
  • Sleeves are padded and contain ribbing similar to the front of the cummerbund.
  • The sleeves end just slightly longer than the bottom edge of the shoulder armor.
  • Vest has a much wider neck opening than the flight suit.
  • Secured at the back using 50mm (2") black hook and loop fastener.
For level two certification (if applicable):
  • The vest is separate from the flight suit and cummerbund.
TB scout chest.jpeg Chest Armor
For 501st approval:
  • Gloss white, semi-gloss or weathered.
  • There is a recessed rectangular area present over the right breast that is painted a medium to dark gray.
  • The chest and back armor join together over the shoulder and the gap covered with a loop of white fabric.
  • The sides of the chest armor are attached to the back armor with white elastic.
For level two certification (if applicable):
  • Shoulder bridge straps, attaching the front and back of the armor, are made of white cotton webbing.
    • Not Nylon.
  • Side under arm chest/back straps are made from 50mm (2") white webbing.
    • Optional: Straps may be off-white if using off white pouches/drop box straps.
    • Optional: 50mm white elastic material is acceptable provided the color matches.
TB scout back.jpeg Back Armor
For 501st approval:
  • Gloss white, semi-gloss or weathered.
  • The back armor has a center tank attached.
  • The top of the tank is flat with a detail piece painted black.
    • Top detail piece uses the same greeblies as seen on the seen used armor.
    • Top detail piece has a white painted circle and red line detail.
    • The tank has a black stripe detail.
    • Optional: Additional "rank indicators", present on the right side of the tank, can number between 0 to 6 stripes.
For level two certification (if applicable):
  • Bullet tank on the back armor has film-accurate greeblie tank topper detail.
  • Tank topper is a separate greeblie to the tank itself.
  • Tank topper is secured with single metal colored rivet in the center of the greeblie.
    • Rear tank has properly placed pin striping and a single bottom attachment rivet.
TB scout cummerbund.jpeg Cummerbund
For 501st approval:
  • White or lightly weathered.
  • Made from matt white, heavy weight cotton fabric.
  • Closes in back with 50mm (2") hook and loop fastener.
  • Extends from just under the chest armor down to the waist.
  • There sis no gap between the belt and cummerbund.
  • Has a tapered cod section with inverted curve sewn in detail.
    • Made from the same material.
  • Connects between the legs to the back of the cummerbund by a 50mm (2") black elastic strap.
  • Front of cummerbund has 6 to 7 (trooper's choice) vertical stitch lines, centered between the two fabric pouches, producing 5 to 6 raised ribs of equal width.
  • Pouches are white or off-white.
For level two certification (if applicable):
  • The cummerbund is separate from the flight suit and vest.
  • There is no visible external edge stitching on the cod or pouch flaps.
TB scout belt.jpeg Belt and Detonator
For 501st approval:
  • Gloss white, semi-gloss or lightly weathered.
  • The front and two "boxes" of the belt are made of plastic.
  • The remainder of the belt that fastens at the back of the waist, is made from a textile material (webbing).
  • Hanging from the sides of the belt are hip boxes (drop boxes).
    • Drop boxes are also made from plastic.
    • Drop boxes are connected to the belt via white textile straps.
      • If using off-white Cummerbund pouches and side straps, the drop box straps are also off-white.
  • Attached to the The back of the belt is a rectangular thermal detonator box with short grey corrugated hose.
  • The correct thermal detonator greeblies are attached to the box.
    • The rectangular part of the thermal detonator greeblie, fixed on the left side of the detonator, is the same as used in the rebel Endor trooper rank badge.
    • On the right hand side is the same round greeblie as used on the Scout tank topper.
    • See the detonator detail page for a close up image of the greeblies.
For level two certification (if applicable):
  • Belt is one piece or made to look like one piece with no rivets, apart from one on each side to secure the fabric belt.
  • Drop boxes hang at the correct distance from the belt.
TB scout knees.jpeg Knee Armor
For 501st approval:
  • Gloss white, semi-gloss or lightly weathered.
  • Black elastic is used to secure the armor around the leg.
For level two certification (if applicable):
  • Knee armor has two elastic straps:
    • The first is 25mm (1") wide and passes through the bottom of the knee armor.
    • The second is 12mm (1/2") wide and riveted to the top sides of the knee armor
      • Rivet remains silver in color.
TB scout boots.jpeg Boots
For 501st approval:
  • White or lightly weathered.
  • The soles of the boot are tan.
  • A "dog bone" shaped strap covers the bridge of the foot.
  • The boots are secured up the back using 25mm (1") white hook and loop fastener.
  • The calf of the boot rises to just slightly underneath the bottom of the knee armor.
For level two certification (if applicable):
  • The boots have slots cut into the heels as seen on film.
  • The boot sole is a single color with no visible stitching.
TB scout holster.jpeg Holster
For 501st approval:
  • Gloss white, semi-gloss or lightly weathered.
  • Attached to the outside right side of the right boot with rivets.
    • Not straps.
  • The blaster pistol fits into the holster.
For level two certification (if applicable):
  • Attached with four silver colored rivets.
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present must meet the guidelines below.

TB scout pistol.jpeg Hold-out Blaster
For 501st approval:
  • Flat or semi-gloss black.
  • Blaster does not have any visible trigger.
  • Blaster is lightly weathered.
For level two certification (if applicable):
  • The scope has lens discs cut into the scope for a more realistic appearance.
  • No decals representing cross hairs or similar.

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:TB_Scout_trooper

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.