(Difference between revisions)
Line 44: Line 44:
*Neck Seal is made of black vinyl or leather type material.
*Neck Seal is made of black vinyl or leather type material.
*4-5 horizontal neck ribs that may range in size from 1/4 inch to 1/2 inch thick.
*4-5 horizontal neck ribs that may range in size from 1/4 inch to 1/2 inch thick.
-
*Bib covers the entire area within the neckline of the chest/back armor, and includes 6 trapezoidal detail shapes in the center and 3 trapezoidal detail shapes on each shoulder. Shapes can be done with or without 3-dimensional features.
+
*Neck ribs connect to bib.
-
*Neck ribs connect to bib.|
+
*Bib covers the entire area within the neckline of the chest and back armor. *Bib area includes trapezoidal detail shapes.
-
*Bib cover shapes are 3-dimensional and include 6 front elongated trapazoids and 3 raised shoulder trapazoids.|}}
+
**Optional: Trapezoidal detail shapes may or may not have 3-dimensional features.|
 +
*Bib detail shapes are 3-dimensional.
 +
**Shapes include (6) front elongated trapezoids and (3) raised shoulder trapezoids.|}}
{{CRLtemplate-onelevel|File:Blankwhite.gif|Shoulder Armor|
{{CRLtemplate-onelevel|File:Blankwhite.gif|Shoulder Armor|
-
*Katarn-Class Commando Clone shoulder bells are rounded on neck and bicep ends with raised center and imbedded buckle detail.
+
Katarn-Class Commando Shoulder Armor.
-
*Shoulder bells are flat black.
+
Armor is painted flat black.
-
*Computer/Technology expert shield cover over right shoulder bell with protruding rectangle rib detail on top.  
+
Armor is rounded on neck and bicep ends with raised center and imbedded buckle detail.
 +
**Buckle is black.
 +
**Recessed rectangle areas are grey.
 +
*Right Shoulder Only:
 +
**Computer/Technology expert shield cover over right shoulder with protruding rectangle rib detail on top.
**Shield cover is flat black.
**Shield cover is flat black.
**Rectangle rib detail is black with gray spacers.
**Rectangle rib detail is black with gray spacers.
-
*Bells are weathered and have blaster, burn and/or scratch marks.
+
*Armor is weathered and has blaster and/ or scratch marks.|
-
*Recessed rectangle areas gray.
+
*Groove lines are weathered with grey/ brown to highlight detail.|}}
-
*Buckle is black.|
+
-
*Groove lines are weathered with gray/brown to bring out detail.|}}
+
{{CRLtemplate-nolevels|File:Blankwhite.gif|Upper Arm Armor|
{{CRLtemplate-nolevels|File:Blankwhite.gif|Upper Arm Armor|
-
*Katarn-Class Commando Clone Biceps are flat black.  
+
*Katarn-Class Commando Upper Arm Armor.
 +
*Armor is painted flat black.
*Indented emblem is flat black.
*Indented emblem is flat black.
-
*Biceps are weathered and have blaster and/or scratch marks.
+
*Armor is seamless.
-
*Biceps are seamless.||}}
+
**No visible traces of how the armor was assembled are shown.
 +
*Armor is weathered and has blaster and/ or scratch marks.||}}
{{CRLtemplate-nolevels|File:Blankwhite.gif|Elbow Armor|
{{CRLtemplate-nolevels|File:Blankwhite.gif|Elbow Armor|
-
*Katarn-Class Commando Clone Elbows are flat black.  
+
*Katarn-Class Commando Elbows.
-
*Elbows are weathered and have blaster and/or scratch marks.
+
*Armor is painted flat black.
-
*Elbow are attached or hinged to Forearm.
+
*Elbows are attached or hinged to Forearm Armor.
-
*Connecting strap attaches to Elbow sides and wraps over the arm.||}}
+
*Connecting strap attaches to each side of elbow and wraps over the arm.
 +
**Optional: Elbows are strapless.
 +
*Armor is weathered and has blaster and/ or scratch marks.||}}
{{CRLtemplate-nolevels|File:DarmanForearms.jpg|Forearm Armor|
{{CRLtemplate-nolevels|File:DarmanForearms.jpg|Forearm Armor|
Line 84: Line 92:
{{CRLtemplate-onelevel|File:DarmanHandPlates.jpg|Hand Plates|
{{CRLtemplate-onelevel|File:DarmanHandPlates.jpg|Hand Plates|
-
*Katarn-Class Commando Clone Handplates have elevated “Y” or “T” shape on left handplate with edge indentation, and elevated horizontal bar on top of right handplate.
+
*Katarn-Class Commando Handplates.
-
*Handplates are flat black.
+
*Armor is painted flat black.
-
*Handplates are weathered and have blaster and/or scratch marks.|
+
*Left Hand Plate has elevated “Y” or “T” shape with edge indentation.
 +
*Right Hand Plate has elevated horizontal bar on top.
 +
*Armor is weathered and has blaster and/or scratch marks.|
*Vibroblade attachment on left hand.|}}
*Vibroblade attachment on left hand.|}}
{{CRLtemplate-nolevels|File:Blankwhite.gif|Chest Armor|
{{CRLtemplate-nolevels|File:Blankwhite.gif|Chest Armor|
-
*Katarn-Class Commando Clone Chest Armor has a “V” shape front with elevated chest area.
+
Katarn-Class Commando Chest Armor.
-
*Chest is flat black. 
+
*Armor is painted flat black.
-
*Two gray circles are located on left chest detail aligned horizontally to match chest edge. Circles may range in size from 1/2 inch to 3/4 inch diameter.
+
*Armor has a “V” shape front with elevated chest area.
 +
*Two gray circles are located on left chest detail and aligned horizontally to match chest edge.
 +
**Circles may range in size from 1/2 inch to 3/4 inch diameter.
 +
*Chest and Back Armor match together at the sides with no open gap.
 +
**A seam line is present.
*Chest is weathered and has blaster and/or scratch marks.||}}
*Chest is weathered and has blaster and/or scratch marks.||}}
{{CRLtemplate-nolevels|File:Blankwhite.gif|Back Armor|
{{CRLtemplate-nolevels|File:Blankwhite.gif|Back Armor|
-
*Katarn-Class Commando Clone Back Armor is flat on back and lines up with Backpack. Number plate in back is authorized, but the back must have exterior edge that lines up with Backpack.
+
*Katarn-Class Commando Back Armor.
-
*Back is flat black.
+
*Armor is painted flat black.
-
*Back is weathered and has blaster and/or scratch marks.
+
*Raised area on numberplate is gray.
-
*Chest and back plate match together at the sides with no gap, just a seam line.
+
*Back Armor lines up with Backpack.
-
*Raised area on numberplate is gray.||}}
+
**If back detail is present the exterior edge lines up with Backpack.
 +
*Back and Chest Armor match together at the sides with no open gap.
 +
**A seam line is present.
 +
*Armor is weathered and has blaster and/ or scratch marks.||}}
{{CRLtemplate-onelevel|File:Blankwhite.gif|Backpack|
{{CRLtemplate-onelevel|File:Blankwhite.gif|Backpack|
-
*Katarn-Class Commando Clone Backpack with 2 digit illuminated translucent ID number (22) with upper graphic detail and two handles mounted on bottom.  
+
Katarn-Class Commando Backpack.
-
*Computer/Technology expert “h” frame attachment with rectangular box connectors that connect to each side of the Backpack.  
+
*Armor is painted flat black.
-
**Tubes extend up from box connectors to a flat cross bar. Left tube has an adjoining smaller tube that also vertically connects box connector to flat cross bar.
+
*Backpack has 2-digit illuminated translucent ID number.
 +
**Illuminated number is [22] and includes upper graphic detail.
 +
**ID number frame and extruding circle detail are grey.  
 +
*Computer/ Technology expert “h” frame attachment with rectangular box connectors on each side of Backpack.
 +
*Tubes extend up from box connectors to a flat cross bar.
 +
*Cross bar has imbedded gray horizontal strip in the center on both front and back.
 +
*Left Tube:
 +
**Left tube has adjoining smaller tube that also vertically connects box connector to flat cross bar.
**Cylindrical antennae pod with indented gray detail sits atop the left tube above the flat cross bar.
**Cylindrical antennae pod with indented gray detail sits atop the left tube above the flat cross bar.
-
**Cross bar has imbedded gray horizontal strip in the center on both front and back.  Back side has 5 horizontally aligned blue LEDs, with all five lighting up.
+
**Back side has (5) horizontally aligned blue LEDs, with all five illuminated.
-
**Left tube has frosted portion just below the cross bar. Must have blue LED.
+
**Left tube has frosted portion just below the cross bar.  
-
**Right tube is gray on upper portion of tube just below the cross bar.
+
***Blue LED is present.
-
**Top of left box connector below the extended tube has imbedded horizontally aligned LEDs.
+
*Right tube:
-
*Backpack is flat black.
+
**Right tube is grey on upper portion, just below the cross bar.
-
*Backpack is weathered and has blaster and/or scratch marks.
+
*Top of left box connector, below the extended tube, has imbedded horizontally aligned LEDs.
*Backpack attaches to Back armor without visible hardware.  
*Backpack attaches to Back armor without visible hardware.  
-
*Backpack construction shall have no visible seams.
+
*Backpack construction has no visible seams.
-
*Raised area on numberplate is gray.
+
*Armor is weathered and has blaster and/or scratch marks.|
-
*Circle to the right of numberplate is gray.|
+
*All LED Backpack features are illuminated.|}}
*All LED Backpack features are illuminated.|}}
{{CRLtemplate-nolevels|File:Blankwhite.gif|Abdomen Armor|
{{CRLtemplate-nolevels|File:Blankwhite.gif|Abdomen Armor|
-
*Katarn-Class Commando Clone Abdominal Armor is solid cod and ab piece with surface 3-D details and a permanent belt box on the sides of the waist.
+
*Katarn-Class Commando Abdomen Armor.
-
**If using floater ab section, it must be placed behind the lower ab and cod section closer to the body.
+
*Armor is painted flat black.
-
*Abdominal armor is flat black.  
+
*Armor consists of a solid codpiece and abdomen.
-
*Armor is weathered with blaster and/or scratches.
+
*Abdomen has 3-D surface details and a permanent belt box waist on the sides.
-
*Abdominal armor may overlap Posterior armor along sides, must be as seamless as possible.||}}
+
*Armor is as seamless as possible.
 +
**Abdominal armor may overlap Posterior Armor along sides.
 +
**If using floater abdomen section, it is placed behind the lower abdomen and codpiece, closest to the body.
 +
*Armor is weathered with blaster and/or scratch marks.||}}
{{CRLtemplate-nolevels|File:Blankwhite.gif|Posterior Armor|
{{CRLtemplate-nolevels|File:Blankwhite.gif|Posterior Armor|
-
*Katarn-Class Commando Clone Posterior Armor is a solid butt and back piece with protruding rectangle and angled edge butt detail. Permanent belt box waist aligns with abdominal armor.
+
*Katarn-Class Commando Posterior Armor.
-
*Posterior armor is flat black.  
+
*Armor is painted flat black.
-
*Posterior is weathered with blaster and/or scratches.||}}
+
*Armor consists of a solid back and posterior.
 +
*Armor includes protruding rectangle and angled edge posterior detail.
 +
*Permanent belt box waist aligns with Abdomen Armor.
 +
*Posterior is weathered with blaster and/or scratch marks.||}}
{{CRLtemplate-nolevels|File:Blankwhite.gif|Thigh Armor|
{{CRLtemplate-nolevels|File:Blankwhite.gif|Thigh Armor|
-
*Katarn-Class Commando Clone Thigh armor that is similar but with slight differences to regular clone armor with arching indent in back and raised ridge in front.
+
*Katarn-Class Commando Thigh Armor.
-
*Thighs are flat black.  
+
**Armor is similar, but with slight differences to regular clone armor, with arching indent in back and raised ridge in front.
-
*Thighs are weathered with blaster and/or scratch marks.
+
*Armor is painted flat black.
-
*Thighs are seamless.||}}
+
*Armor is seamless.
 +
**No visible traces of how the armor was assembled are shown.
 +
*Thighs are weathered with blaster and/or scratch marks.||}}
{{CRLtemplate-nolevels|File:Blankwhite.gif|Knee and Lower Leg Armor|
{{CRLtemplate-nolevels|File:Blankwhite.gif|Knee and Lower Leg Armor|
-
*Katarn-Class Commando Clone Knees and Shins. Shins are rounded at the calf and have a flat front.
+
*Katarn-Class Commando Knee/ Lower Leg Armor.
 +
*Armor is painted flat black.
*Knees have a rounded shield pattern with two vertical indents running from top to lower half.
*Knees have a rounded shield pattern with two vertical indents running from top to lower half.
-
*Knees and Shins are flat black.
+
*Knees are attached or hinged to top of shin and designed to look as if floating in front of the knee.
-
*Knees and Shins are weathered with blaster and/or scratch marks.
+
*Angle of knee follows alignment of front shin surface.
-
*Shins are constructed with hidden closures or seamless. Overlapping front or inside leg seams are acceptable. 
+
*Legs are rounded at the calf and have a flat front.
-
*Knees are attached or hinged to top of shin and designed to look as if floating in front of the knee. Angle of knee must follow alignment of front Shin surface.||}}
+
*Armor is constructed with hidden closures or seamless if possible.
 +
**Rear or inside leg seams are acceptable.
 +
**Front seam may also be overlapped with indented edge to provide appearance of seamless edge.
 +
*Knees and Shins are weathered with blaster and/or scratch marks.||}}
{{CRLtemplate|File:Blankwhite.gif|Boots|
{{CRLtemplate|File:Blankwhite.gif|Boots|
-
*Katarn-Class Commando Clone Boots are more rugged than regular clone boots with thicker multi-terrain multi-environment sole, and has front armor shield and strapping.
+
*Katarn-Class Commando Boots.
-
*Boots are black vinyl or leather material that covers the ankle area with no visible undersuit.  
+
*Boots are constructed from black vinyl or leather material.
-
*Boots have flat soles (heel not separated) and no visible laces. Some visible tread on side and arch is authorized.
+
*Boots are tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
-
*Front boot armor detail is similar to standard clone boot and runs up to boot buckle detail.
+
*Boots have front armor shield and strapping.
-
*Front boot shield wrap covering connects at boot buckle and wraps over top of boot. Sides connect with protruding discs at each ankle.
+
*Front boot shield wrap covering connects at boot buckle and wraps over top of boot.
-
*There must be no markings or labels from the shoe makers.|
+
**Sides connect with protruding discs at each ankle.
-
*Boot sole is black or dark gray.
+
*Front boot armor detail is similar to standard clone boot and extends up to boot buckle detail.
 +
*Boots are lace-less and have flat soles.
 +
**Some visible tread on side and arch is acceptable.
 +
*Boots are more rugged then regular clone boots with a thicker, multi-terrain, multi-environment bottom tread.
 +
*Boots have no markings or labels from the shoe maker.|
 +
*Boot sole is black or dark grey.
*Boot sole has game accurate multi-terrain matching sole.|
*Boot sole has game accurate multi-terrain matching sole.|
*Back heel box connects to front boot covering shield wrap at the circular disc.}}
*Back heel box connects to front boot covering shield wrap at the circular disc.}}
Line 158: Line 198:
{{CRLaccessories}}
{{CRLaccessories}}
-
{{CRLtemplate|File:Generic_dc17.jpeg|DC17m Interchangeable Weapon System|
+
{{CRL-dc17m-rifle}}
-
*Blastech base weapon has bulky design similar to game design.
+
-
**Has trigger guard.
+
-
**Elongated fore grip located under upper receiver.
+
-
**Back angled cover with louvered design.
+
-
**Ammo magazine slot on left center of upper receiver.
+
-
**Shield flap on left side of upper receiver behind magazine well and above trigger guard.
+
-
**Rear prong sights on top of upper receiver.
+
-
*Assault Rifle attachment with short barrel and blaster ammo magazine.
+
-
*DC17m is weathered.|
+
-
*Blue lighted 3 digit numeric display counter on left side.
+
-
*Blue LED light bars on ammo magazine.
+
-
*Blue LED power on light bar on top of upper receiver.|
+
-
*Blue LED barrel light activated with trigger.
+
-
*Game accurate sound effects.
+
-
*Display countdown when firing coincides with diminishing ammo magazine light.}}
+
{{CRLfooter|CTN_CRL|R}}
{{CRLfooter|CTN_CRL|R}}

Revision as of 03:49, 30 August 2014

crlblackhd.gif
Republic Commando: Atin
Missingprofile.jpg
Model unknown, Photo by unknown


Clone-Trooper-Detachment.png

Description: Republic Commando: Atin
Prefix: RC
Detachment: Clone Trooper Detachment
Context: Star Wars: Republic Commando Novels

Republic Commandos are uniquely trained to work in groups as one. Computer/Technology Expert.


The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

  • This CRL is a work in progress.
  • This costume may be approved by GMLs, but until the library entry is complete, it is suggested that this character first be submitted to the appropriate DL/GML peer review section of the legion forum.
  • If you have this costume and would like to assist with the completion of this library entry, please contact your detachment leader.
  • Please note that the use of the word "should" below does not indicate that the armor piece is considered open to interpretation. All instances of "should be" and "should have" will be replaced with "is" and "has", as this guide is completed.
Required Costume Components

The following costume components are present and appear as described below.

Blankwhite.gif Helmet
For 501st approval:
  • Katarn-Class Commando Armor Helmet matching armor color.
  • Armor is painted flat black.
  • Blue Mirrored eye lens.
    • Optional: May use black eye lens as long as blue illuminated glow reflects from lens lighting.
  • Blue lighting for eye lens illumination installed along upper edge of lens and concealed behind helmet edge.
    • EL Wire is recommended.
    • LED lighting or acrylic rod is also acceptable.
  • Black mouth frown.
  • Chin communication greeblie detail piece painted flat black with gray backing.
  • Two front aerators are painted flat black with gray backing.
  • Cheek vents on each side of helmet face.
    • If vents are cut out, they are backed with black mesh screen or speakers.
  • Right Ear Only:
    • Spotlight holder on right ear circle of helmet with LED bulb.
  • Left Ear Only:
    • Communications pod with two antennae covers left ear.
    • Pod is black.
    • Antennae are gray along the center of the antennae poles.
    • Gray horizontal stripe edging along top of Pod.
      • Does not cover top angled base for antennae connection.
  • Black band across back of helmet above the gray band.
  • Grey band across back of helmet below the black band.
  • Grey ventilation louvers that run vertically down the center of helmet back.
    • If backing material is cut out it is covered with black mesh screen.
  • Side vents under ear column are painted to match helmet with backing material painted black.
    • If vents are cut out for ventilation, they are backed with black mesh screen.
  • Armor is weathered and has blaster and/ or scratch marks.
For level two certification (if applicable):
  • Detail groove lines are weathered with grey to highlight groove lines.
RCNeckseal.jpg Neckseal
For 501st approval:
  • Neck Seal is made of black vinyl or leather type material.
  • 4-5 horizontal neck ribs that may range in size from 1/4 inch to 1/2 inch thick.
  • Neck ribs connect to bib.
  • Bib covers the entire area within the neckline of the chest and back armor. *Bib area includes trapezoidal detail shapes.
    • Optional: Trapezoidal detail shapes may or may not have 3-dimensional features.
For level two certification (if applicable):
  • Bib detail shapes are 3-dimensional.
    • Shapes include (6) front elongated trapezoids and (3) raised shoulder trapezoids.
Blankwhite.gif Shoulder Armor
For 501st approval:

Katarn-Class Commando Shoulder Armor. Armor is painted flat black. Armor is rounded on neck and bicep ends with raised center and imbedded buckle detail.

    • Buckle is black.
    • Recessed rectangle areas are grey.
  • Right Shoulder Only:
    • Computer/Technology expert shield cover over right shoulder with protruding rectangle rib detail on top.
    • Shield cover is flat black.
    • Rectangle rib detail is black with gray spacers.
  • Armor is weathered and has blaster and/ or scratch marks.
For level two certification (if applicable):
  • Groove lines are weathered with grey/ brown to highlight detail.
Blankwhite.gif Upper Arm Armor
For 501st approval:
  • Katarn-Class Commando Upper Arm Armor.
  • Armor is painted flat black.
  • Indented emblem is flat black.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Armor is weathered and has blaster and/ or scratch marks.


Blankwhite.gif Elbow Armor
For 501st approval:
  • Katarn-Class Commando Elbows.
  • Armor is painted flat black.
  • Elbows are attached or hinged to Forearm Armor.
  • Connecting strap attaches to each side of elbow and wraps over the arm.
    • Optional: Elbows are strapless.
  • Armor is weathered and has blaster and/ or scratch marks.


DarmanForearms.jpg Forearm Armor
For 501st approval:
  • Katarn-Class Commando Forearms.
  • Armor is painted flat black.
  • Forearm Armor has raised resin detail on top and curving indented designs on sides.
    • Side with double curved indents is on outside of forearm.
  • Forearms have attached or hinged Elbows.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Armor is weathered and has blaster and/ or scratch marks.



RCGloves.jpg Gloves
For 501st approval:
  • Black gauntlet length gloves made of leather, nylon, or other low pile fabrics.
  • Gloves have imbedded armor padding along fingers and back of hand.
  • Gloves do not show any labels or logos once armor is attached.


DarmanHandPlates.jpg Hand Plates
For 501st approval:
  • Katarn-Class Commando Handplates.
  • Armor is painted flat black.
  • Left Hand Plate has elevated “Y” or “T” shape with edge indentation.
  • Right Hand Plate has elevated horizontal bar on top.
  • Armor is weathered and has blaster and/or scratch marks.
For level two certification (if applicable):
  • Vibroblade attachment on left hand.
Blankwhite.gif Chest Armor
For 501st approval:

Katarn-Class Commando Chest Armor.

  • Armor is painted flat black.
  • Armor has a “V” shape front with elevated chest area.
  • Two gray circles are located on left chest detail and aligned horizontally to match chest edge.
    • Circles may range in size from 1/2 inch to 3/4 inch diameter.
  • Chest and Back Armor match together at the sides with no open gap.
    • A seam line is present.
  • Chest is weathered and has blaster and/or scratch marks.


Blankwhite.gif Back Armor
For 501st approval:
  • Katarn-Class Commando Back Armor.
  • Armor is painted flat black.
  • Raised area on numberplate is gray.
  • Back Armor lines up with Backpack.
    • If back detail is present the exterior edge lines up with Backpack.
  • Back and Chest Armor match together at the sides with no open gap.
    • A seam line is present.
  • Armor is weathered and has blaster and/ or scratch marks.


Blankwhite.gif Backpack
For 501st approval:

Katarn-Class Commando Backpack.

  • Armor is painted flat black.
  • Backpack has 2-digit illuminated translucent ID number.
    • Illuminated number is [22] and includes upper graphic detail.
    • ID number frame and extruding circle detail are grey.
  • Computer/ Technology expert “h” frame attachment with rectangular box connectors on each side of Backpack.
  • Tubes extend up from box connectors to a flat cross bar.
  • Cross bar has imbedded gray horizontal strip in the center on both front and back.
  • Left Tube:
    • Left tube has adjoining smaller tube that also vertically connects box connector to flat cross bar.
    • Cylindrical antennae pod with indented gray detail sits atop the left tube above the flat cross bar.
    • Back side has (5) horizontally aligned blue LEDs, with all five illuminated.
    • Left tube has frosted portion just below the cross bar.
      • Blue LED is present.
  • Right tube:
    • Right tube is grey on upper portion, just below the cross bar.
  • Top of left box connector, below the extended tube, has imbedded horizontally aligned LEDs.
  • Backpack attaches to Back armor without visible hardware.
  • Backpack construction has no visible seams.
  • Armor is weathered and has blaster and/or scratch marks.
For level two certification (if applicable):
  • All LED Backpack features are illuminated.
Blankwhite.gif Abdomen Armor
For 501st approval:
  • Katarn-Class Commando Abdomen Armor.
  • Armor is painted flat black.
  • Armor consists of a solid codpiece and abdomen.
  • Abdomen has 3-D surface details and a permanent belt box waist on the sides.
  • Armor is as seamless as possible.
    • Abdominal armor may overlap Posterior Armor along sides.
    • If using floater abdomen section, it is placed behind the lower abdomen and codpiece, closest to the body.
  • Armor is weathered with blaster and/or scratch marks.


Blankwhite.gif Posterior Armor
For 501st approval:
  • Katarn-Class Commando Posterior Armor.
  • Armor is painted flat black.
  • Armor consists of a solid back and posterior.
  • Armor includes protruding rectangle and angled edge posterior detail.
  • Permanent belt box waist aligns with Abdomen Armor.
  • Posterior is weathered with blaster and/or scratch marks.


Blankwhite.gif Thigh Armor
For 501st approval:
  • Katarn-Class Commando Thigh Armor.
    • Armor is similar, but with slight differences to regular clone armor, with arching indent in back and raised ridge in front.
  • Armor is painted flat black.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Thighs are weathered with blaster and/or scratch marks.


Blankwhite.gif Knee and Lower Leg Armor
For 501st approval:
  • Katarn-Class Commando Knee/ Lower Leg Armor.
  • Armor is painted flat black.
  • Knees have a rounded shield pattern with two vertical indents running from top to lower half.
  • Knees are attached or hinged to top of shin and designed to look as if floating in front of the knee.
  • Angle of knee follows alignment of front shin surface.
  • Legs are rounded at the calf and have a flat front.
  • Armor is constructed with hidden closures or seamless if possible.
    • Rear or inside leg seams are acceptable.
    • Front seam may also be overlapped with indented edge to provide appearance of seamless edge.
  • Knees and Shins are weathered with blaster and/or scratch marks.


Blankwhite.gif Boots
For 501st approval:
  • Katarn-Class Commando Boots.
  • Boots are constructed from black vinyl or leather material.
  • Boots are tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
  • Boots have front armor shield and strapping.
  • Front boot shield wrap covering connects at boot buckle and wraps over top of boot.
    • Sides connect with protruding discs at each ankle.
  • Front boot armor detail is similar to standard clone boot and extends up to boot buckle detail.
  • Boots are lace-less and have flat soles.
    • Some visible tread on side and arch is acceptable.
  • Boots are more rugged then regular clone boots with a thicker, multi-terrain, multi-environment bottom tread.
  • Boots have no markings or labels from the shoe maker.
For level two certification (if applicable):
  • Boot sole is black or dark grey.
  • Boot sole has game accurate multi-terrain matching sole.
For level three certification (if applicable):
  • Back heel box connects to front boot covering shield wrap at the circular disc.
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.


Generic dc17.jpeg DC17m Interchangeable Weapon System
For 501st approval:

Manufactured by BlasTech Industries, the DC17m weapon system may be reconfigured into a standard blaster assault rifle, a compact sniper rifle, or an anti-armor grenade launcher, depending upon the needs of the user.

  • Base weapon has bulky design similar to the in-game characteristics.
    • Has trigger handle.
    • Elongated stock located under front compartment.
    • Back angled cover with louvered design
    • Ammo clip slot on left center compartment.
    • Shield flap on left above trigger handle.
    • Multiple sights on top edge.
  • Assault Rifle attachment with short barrel and rifle ammo clip.
  • DC17m is weathered.
For level two certification (if applicable):
  • Blue lighted 3 digit numeric display counter.
  • Blue LED light bars on ammo clip.
  • Blue LED power on light bar on top edge.
For level three certification (if applicable):
  • Blue LED barrel light activated with trigger.
  • Game accurate sound effects.
  • Display countdown when firing coincides with diminishing ammo clip light.

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:RC_atin

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.