Costuming:Jawa - Revision history

TK826 at 06:53, 14 April 2013

2013-04-14T06:53:21Z

← Older revision		Revision as of 06:53, 14 April 2013
Line 11:		Line 11:

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Mask\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Mask\|
-	*The mask is base upon which to mount two glowing eyes.	+	*The mask is a base upon which to mount the two glowing eyes.
	*Face Shroud/mask: The face shroud must be constructed of a black material or short black fur that hides the entire head and face of the costumer (No skin may be visible).		*Face Shroud/mask: The face shroud must be constructed of a black material or short black fur that hides the entire head and face of the costumer (No skin may be visible).
	*To help conceal everything, and still allow for necessary vision and air circulation, a black mesh fabric may be used to cover over the top of the completed mask and eyes as long as the eyes can be seen when lit.		*To help conceal everything, and still allow for necessary vision and air circulation, a black mesh fabric may be used to cover over the top of the completed mask and eyes as long as the eyes can be seen when lit.

TK826 at 00:17, 14 April 2013

2013-04-14T00:17:41Z

← Older revision		Revision as of 00:17, 14 April 2013
Line 12:		Line 12:
	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Mask\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Mask\|
	*The mask is base upon which to mount two glowing eyes.		*The mask is base upon which to mount two glowing eyes.
-	*Face Shroud/mask: The face shroud must be constructed of a black material or short black fur that hides the entire head and face of the costumer (No skin may be visible). To help conceal everything, and still allow for necessary vision and air circulation, a black mesh fabric may be used to cover over the top of the completed mask and eyes as long as the eyes can be seen when lit.	+	*Face Shroud/mask: The face shroud must be constructed of a black material or short black fur that hides the entire head and face of the costumer (No skin may be visible).
-	* Eyes: When the mask is worn with the costume, only the illuminated eyes should be visible from inside the hood. The eyes should "glow", not "project" meaning, the use of mini-flashlights or other reflectors that emit a beam of light is incorrect. A simple incandescent lamp or non-directional LED is ideal. The eyes must be yellow or amber in color and ~~not exceed~~ 1 ~~inch/3cm~~ in diameter. \| \|  }}	+	*To help conceal everything, and still allow for necessary vision and air circulation, a black mesh fabric may be used to cover over the top of the completed mask and eyes as long as the eyes can be seen when lit.
		+	* Eyes: When the mask is worn with the costume, only the illuminated eyes should be visible from inside the hood.
		+	*The eyes should "glow", not "project" meaning, the use of mini-flashlights or other reflectors that emit a beam of light is incorrect. A simple incandescent lamp or non-directional LED is ideal.
		+	*The eyes must be yellow or amber in color and sized at 1 to 1.25in (2.5 to 3.2 cm) in diameter. \| \|  }}

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Hood\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Hood\|
-	*The hood is a separate piece from the robe and is not connected to it. The hood is made of the same material as the robe. Brown monks cloth or a similar textured fabric is to be used. The inside of the hood must be lined with solid black fabric. To achieve the correct look and maintain proper visibility, a wire or plastic reinforcement is sewn into the face opening. The flaps at the bottom of the face/hood opening should overlap and wrap around as seen in the films. The hood may show signs of weathering. \| \|  }}	+	*The hood is a separate piece from the robe and is not connected to it.
		+	*The hood is made of the same material as the robe.
		+	*Brown monks cloth or a similar textured fabric is to be used.
		+	*The inside of the hood must be lined with solid black fabric.
		+	*To achieve the correct look and maintain proper visibility, a wire or plastic reinforcement is sewn into the face opening.
		+	*The flaps at the bottom of the face/hood opening should overlap and wrap around as seen in the films.
		+	*The hood may show signs of weathering. \| \|  }}

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Robe\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Robe\|
-	*Brown monks cloth or a similar textured fabric is to be used to construct the robe. The robe must be sewn closed or have an off center (to the side) opening that runs the length of the garment. No visible seams should appear. The openings of the sleeves and robe bottom must be not be hemmed and must also be tattered and frayed. The finished robe must be weathered. \| \|  }}	+	*Brown monks cloth or a similar textured fabric is to be used to construct the robe.
		+	*The robe must be sewn closed or have an off center (to the side) opening that runs the length of the garment.
		+	*No visible seams should appear.
		+	*The openings of the sleeves and robe bottom must be not be hemmed and must also be tattered and frayed.
		+	*The finished robe must be weathered. \| \|  }}

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Gloves\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Gloves\|
-	*The gloves must be constructed of black cloth or black leather. Gloves must cover hands and entire wrist. Black short fur may be attached to the gloves on top of the hands. \| \|  }}	+	*The gloves must be constructed of black cloth or black leather.
		+	*Gloves must cover hands and entire wrist.
		+	*Black short fur may be attached to the gloves on top of the hands. \| \|  }}

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Boots\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Boots\|
-	*The boots must be wrapped in the same brown textured fabric as used to construct the hood and robe. The boots must be tall enough to cover the mid-shin or higher. The boots must be weathered in the same manner as the hood and robe. \| \|  }}	+	*The boots must be wrapped in the same brown textured fabric as used to construct the hood and robe.
		+	*The boots must be tall enough to cover the mid-shin or higher.
		+	*The boots must be weathered in the same manner as the hood and robe. \| \|  }}

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Undergarments\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Undergarments\|
Line 31:		Line 48:

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Bandoliers\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Bandoliers\|
-	*At least one bandolier must be worn. Acceptable versions of the bandolier consist of Swedish, British, NZ, Australian, Canadian, and German. The bandoliers may be purchased originals or accurately fabricated reproductions. They must be made of brown/black leather or similar looking material.	+	*At least one bandolier must be worn.
		+	*Acceptable versions of the bandolier consist of Swedish, British, NZ, Australian, Canadian, and German.
		+	*The bandoliers may be purchased originals or accurately fabricated reproductions.
		+	*They must be made of brown/black leather or similar looking material.
	*The bandolier(s) must be aged and weathered. All metal pieces should be dull, worn and scuffed. The metal pieces should not appear new and shiny or have a shine to them.		*The bandolier(s) must be aged and weathered. All metal pieces should be dull, worn and scuffed. The metal pieces should not appear new and shiny or have a shine to them.
-	*More than one bandolier may be worn at the same time. Acceptable configurations include: One bandolier across the shoulder to the waist, two crossed over the chest to the waist, one across the chest and one around the waist, two crossed over the chest and one around the waist. \| \|  }}	+	*More than one bandolier may be worn at the same time.
		+	*Acceptable configurations include: One bandolier across the shoulder to the waist, two crossed over the chest to the waist, one across the chest and one around the waist, two crossed over the chest and one around the waist. \| \|  }}

	{{CRLaccessories}}		{{CRLaccessories}}

TK826 at 20:06, 12 April 2013

2013-04-12T20:06:13Z

← Older revision		Revision as of 20:06, 12 April 2013
Line 33:		Line 33:
	*At least one bandolier must be worn. Acceptable versions of the bandolier consist of Swedish, British, NZ, Australian, Canadian, and German. The bandoliers may be purchased originals or accurately fabricated reproductions. They must be made of brown/black leather or similar looking material.		*At least one bandolier must be worn. Acceptable versions of the bandolier consist of Swedish, British, NZ, Australian, Canadian, and German. The bandoliers may be purchased originals or accurately fabricated reproductions. They must be made of brown/black leather or similar looking material.
	*The bandolier(s) must be aged and weathered. All metal pieces should be dull, worn and scuffed. The metal pieces should not appear new and shiny or have a shine to them.		*The bandolier(s) must be aged and weathered. All metal pieces should be dull, worn and scuffed. The metal pieces should not appear new and shiny or have a shine to them.
-	*More than one bandolier may be worn at the same time. Acceptable configurations include: One bandolier across the shoulder to the waist, two ~~crisscrossed across~~ the chest to the waist, one across the chest and one around the waist, two crossed over the chest and one around the waist. \| \|  }}	+	*More than one bandolier may be worn at the same time. Acceptable configurations include: One bandolier across the shoulder to the waist, two crossed over the chest to the waist, one across the chest and one around the waist, two crossed over the chest and one around the waist. \| \|  }}

	{{CRLaccessories}}		{{CRLaccessories}}

TK826 at 20:04, 12 April 2013

2013-04-12T20:04:56Z

← Older revision		Revision as of 20:04, 12 April 2013
Line 33:		Line 33:
	*At least one bandolier must be worn. Acceptable versions of the bandolier consist of Swedish, British, NZ, Australian, Canadian, and German. The bandoliers may be purchased originals or accurately fabricated reproductions. They must be made of brown/black leather or similar looking material.		*At least one bandolier must be worn. Acceptable versions of the bandolier consist of Swedish, British, NZ, Australian, Canadian, and German. The bandoliers may be purchased originals or accurately fabricated reproductions. They must be made of brown/black leather or similar looking material.
	*The bandolier(s) must be aged and weathered. All metal pieces should be dull, worn and scuffed. The metal pieces should not appear new and shiny or have a shine to them.		*The bandolier(s) must be aged and weathered. All metal pieces should be dull, worn and scuffed. The metal pieces should not appear new and shiny or have a shine to them.
-	*More than one bandolier may be worn at the same time. Acceptable configurations include: One bandolier across the shoulder to the waist, two crisscrossed across the chest to the waist, one across the chest and one around the waist, two ~~crisscrossed across~~ the chest and one around the waist. \| \|  }}	+	*More than one bandolier may be worn at the same time. Acceptable configurations include: One bandolier across the shoulder to the waist, two crisscrossed across the chest to the waist, one across the chest and one around the waist, two crossed over the chest and one around the waist. \| \|  }}

	{{CRLaccessories}}		{{CRLaccessories}}

TK826 at 16:37, 12 April 2013

2013-04-12T16:37:13Z

← Older revision		Revision as of 16:37, 12 April 2013
Line 47:		Line 47:

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Torch welder\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Torch welder\|
-	*The device which ~~was~~ used to attach restraining bolts to the various droids. \| \| \| }}	+	*The device which is used to attach restraining bolts to the various droids. \| \| \| }}

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Droid caller\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Droid caller\|

TK826 at 16:36, 12 April 2013

2013-04-12T16:36:09Z

← Older revision		Revision as of 16:36, 12 April 2013
Line 38:		Line 38:

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Vest\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Vest\|
-	*Vest made of tan textured fabric. If used, the vest must ~~been~~ weathered. \| \| \| }}	+	*Vest made of tan textured fabric. If used, the vest must be weathered. \| \| \| }}

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Ion Blaster\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Ion Blaster\|

TK826 at 15:13, 12 April 2013

2013-04-12T15:13:15Z

← Older revision		Revision as of 15:13, 12 April 2013
Line 10:		Line 10:
	{{CRLrequirements}}		{{CRLrequirements}}

-	{{CRLtemplate-nolevels\|File:Blankwhite.gif\| ~~Helmet /~~ Mask\|	+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Mask\|
-	*~~Mask:~~ The mask is ~~basically a~~ base upon which to mount two glowing eyes. Only the illuminated eyes should be visible, making it ideal to wear the mask under the shroud. The glowing eyes should glow, not project, so do not use mini-flashlights or other reflector beams that shoot light out. A simple incandescent lamp or non-directional LED is ideal. The diameter of the light should not exceed 3/4” (5cm).	+	*The mask is base upon which to mount two glowing eyes.
-	*Face Shroud: The face shroud ~~should~~ be a ~~breathable,~~ black ~~covering~~ that hides the head of the costumer, ~~but allows~~ for necessary vision and air circulation ~~(such as~~ a ~~tight~~ mesh).	+	*Face Shroud/mask: The face shroud must be constructed of a black material or short black fur that hides the entire head and face of the costumer (No skin may be visible). To help conceal everything, and still allow for necessary vision and air circulation, a black mesh fabric may be used to cover over the top of the completed mask and eyes as long as the eyes can be seen when lit.
-	*~~The hood should be made of material that matches~~ the ~~robes~~, ~~preferably~~ the ~~appropriate herringbone Ralph Lauren blanket, Monk’s cloth, or similar textured material, and~~ should be ~~a rusty brown color~~. The ~~hood~~ should ~~have~~ a ~~wire reinforcement sewn into the face opening to keep the hood open for visibility and look~~. A ~~solid core, coated wire of 12~~ or ~~14 gauge metal~~ is ~~recommended~~. The ~~flaps at the bottom of the face opening should overlap as seen~~ in ~~the films~~. \| \|  }}	+	* Eyes: When the mask is worn with the costume, only the illuminated eyes should be visible from inside the hood. The eyes should "glow", not "project" meaning, the use of mini-flashlights or other reflectors that emit a beam of light is incorrect. A simple incandescent lamp or non-directional LED is ideal. The eyes must be yellow or amber in color and not exceed 1 inch/3cm in diameter. \| \|  }}

-	{{CRLtemplate\|File:Blankwhite.gif\|~~Robe(s)~~\|	+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Hood\|
-	*The robe ~~should be~~ of the ~~appropriate herringbone Ralph Lauren blanket, Monk’s~~ cloth, or similar textured ~~material, and should~~ be ~~a rusty brown color~~. The ~~openings~~ of the ~~sleeves and robe bottom should~~ be ~~flared, unhemmed and frayed~~. ~~Cottons are recommended for cost,~~ look, ~~feel, breath-ability,~~ and ~~ease~~ of ~~care~~. \| \|  }}	+	*The hood is a separate piece from the robe and is not connected to it. The hood is made of the same material as the robe. Brown monks cloth or a similar textured fabric is to be used. The inside of the hood must be lined with solid black fabric. To achieve the correct look and maintain proper visibility, a wire or plastic reinforcement is sewn into the face opening. The flaps at the bottom of the face/hood opening should overlap and wrap around as seen in the films. The hood may show signs of weathering. \| \|  }}

		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Robe\|
		+	*Brown monks cloth or a similar textured fabric is to be used to construct the robe. The robe must be sewn closed or have an off center (to the side) opening that runs the length of the garment. No visible seams should appear. The openings of the sleeves and robe bottom must be not be hemmed and must also be tattered and frayed. The finished robe must be weathered. \| \|  }}

		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Gloves\|
		+	*The gloves must be constructed of black cloth or black leather. Gloves must cover hands and entire wrist. Black short fur may be attached to the gloves on top of the hands. \| \|  }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Boots\|
		+	*The boots must be wrapped in the same brown textured fabric as used to construct the hood and robe. The boots must be tall enough to cover the mid-shin or higher. The boots must be weathered in the same manner as the hood and robe. \| \|  }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Undergarments\|
		+	*Black or brown undergarments should be used to cover the arms, legs, and any other areas where skin or clothing might be exposed. This is to ensure that no skin or clothing is visible at anytime. \| \|  }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Bandoliers\|
		+	*At least one bandolier must be worn. Acceptable versions of the bandolier consist of Swedish, British, NZ, Australian, Canadian, and German. The bandoliers may be purchased originals or accurately fabricated reproductions. They must be made of brown/black leather or similar looking material.
		+	*The bandolier(s) must be aged and weathered. All metal pieces should be dull, worn and scuffed. The metal pieces should not appear new and shiny or have a shine to them.
		+	*More than one bandolier may be worn at the same time. Acceptable configurations include: One bandolier across the shoulder to the waist, two crisscrossed across the chest to the waist, one across the chest and one around the waist, two crisscrossed across the chest and one around the waist. \| \|  }}
		+
		+	{{CRLaccessories}}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Vest\|
		+	*Vest made of tan textured fabric. If used, the vest must been weathered. \| \| \| }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Ion Blaster\|
		+	*This is the Jawa's weapon of choice. \| \| \| }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Holster\|
		+	*The holster in which to carry the Ion Blaster. \| \| \| }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Torch welder\|
		+	*The device which was used to attach restraining bolts to the various droids. \| \| \| }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Droid caller\|
		+	*The hand held device which is used to discover the whereabouts and gain the attention of droids. \| \| \| }}

	{{CRLfooter\|Krayt_Clan_CRL\|D}}		{{CRLfooter\|Krayt_Clan_CRL\|D}}

Stormtrooperguy at 17:10, 29 May 2012

2012-05-29T17:10:37Z

← Older revision		Revision as of 17:10, 29 May 2012
Line 10:		Line 10:
	{{CRLrequirements}}		{{CRLrequirements}}

-	{{CRLtemplate\|File:Blankwhite.gif\| Helmet / Mask\|	+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\| Helmet / Mask\|
	*Mask: The mask is basically a base upon which to mount two glowing eyes. Only the illuminated eyes should be visible, making it ideal to wear the mask under the shroud. The glowing eyes should glow, not project, so do not use mini-flashlights or other reflector beams that shoot light out. A simple incandescent lamp or non-directional LED is ideal. The diameter of the light should not exceed 3/4” (5cm).		*Mask: The mask is basically a base upon which to mount two glowing eyes. Only the illuminated eyes should be visible, making it ideal to wear the mask under the shroud. The glowing eyes should glow, not project, so do not use mini-flashlights or other reflector beams that shoot light out. A simple incandescent lamp or non-directional LED is ideal. The diameter of the light should not exceed 3/4” (5cm).
	*Face Shroud: The face shroud should be a breathable, black covering that hides the head of the costumer, but allows for necessary vision and air circulation (such as a tight mesh).		*Face Shroud: The face shroud should be a breathable, black covering that hides the head of the costumer, but allows for necessary vision and air circulation (such as a tight mesh).

Tuskenfett at 08:29, 23 May 2012

2012-05-23T08:29:58Z

← Older revision		Revision as of 08:29, 23 May 2012
Line 14:		Line 14:
	*Face Shroud: The face shroud should be a breathable, black covering that hides the head of the costumer, but allows for necessary vision and air circulation (such as a tight mesh).		*Face Shroud: The face shroud should be a breathable, black covering that hides the head of the costumer, but allows for necessary vision and air circulation (such as a tight mesh).
	*The hood should be made of material that matches the robes, preferably the appropriate herringbone Ralph Lauren blanket, Monk’s cloth, or similar textured material, and should be a rusty brown color. The hood should have a wire reinforcement sewn into the face opening to keep the hood open for visibility and look. A solid core, coated wire of 12 or 14 gauge metal is recommended. The flaps at the bottom of the face opening should overlap as seen in the films. \| \|  }}		*The hood should be made of material that matches the robes, preferably the appropriate herringbone Ralph Lauren blanket, Monk’s cloth, or similar textured material, and should be a rusty brown color. The hood should have a wire reinforcement sewn into the face opening to keep the hood open for visibility and look. A solid core, coated wire of 12 or 14 gauge metal is recommended. The flaps at the bottom of the face opening should overlap as seen in the films. \| \|  }}
		+
		+	{{CRLtemplate\|File:Blankwhite.gif\|Robe(s)\|
		+	*The robe should be of the appropriate herringbone Ralph Lauren blanket, Monk’s cloth, or similar textured material, and should be a rusty brown color. The openings of the sleeves and robe bottom should be flared, unhemmed and frayed. Cottons are recommended for cost, look, feel, breath-ability, and ease of care. \| \|  }}
		+


	{{CRLfooter\|Krayt_Clan_CRL\|D}}		{{CRLfooter\|Krayt_Clan_CRL\|D}}

Tuskenfett at 08:24, 23 May 2012

2012-05-23T08:24:47Z

← Older revision		Revision as of 08:24, 23 May 2012
Line 13:		Line 13:
	*Mask: The mask is basically a base upon which to mount two glowing eyes. Only the illuminated eyes should be visible, making it ideal to wear the mask under the shroud. The glowing eyes should glow, not project, so do not use mini-flashlights or other reflector beams that shoot light out. A simple incandescent lamp or non-directional LED is ideal. The diameter of the light should not exceed 3/4” (5cm).		*Mask: The mask is basically a base upon which to mount two glowing eyes. Only the illuminated eyes should be visible, making it ideal to wear the mask under the shroud. The glowing eyes should glow, not project, so do not use mini-flashlights or other reflector beams that shoot light out. A simple incandescent lamp or non-directional LED is ideal. The diameter of the light should not exceed 3/4” (5cm).
	*Face Shroud: The face shroud should be a breathable, black covering that hides the head of the costumer, but allows for necessary vision and air circulation (such as a tight mesh).		*Face Shroud: The face shroud should be a breathable, black covering that hides the head of the costumer, but allows for necessary vision and air circulation (such as a tight mesh).
-	*The hood should be made of material that matches the robes, preferably the appropriate herringbone Ralph Lauren blanket, Monk’s cloth, or similar textured material, and should be a rusty brown color. The hood should have a wire reinforcement sewn into the face opening to keep the hood open for visibility and look. A solid core, coated wire of 12 or 14 gauge metal is recommended. The flaps at the bottom of the face opening should overlap as seen in the films.	+	*The hood should be made of material that matches the robes, preferably the appropriate herringbone Ralph Lauren blanket, Monk’s cloth, or similar textured material, and should be a rusty brown color. The hood should have a wire reinforcement sewn into the face opening to keep the hood open for visibility and look. A solid core, coated wire of 12 or 14 gauge metal is recommended. The flaps at the bottom of the face opening should overlap as seen in the films. \| \|  }}


	{{CRLfooter\|Krayt_Clan_CRL\|D}}		{{CRLfooter\|Krayt_Clan_CRL\|D}}

← Older revision		Revision as of 16:37, 12 April 2013
Line 47:		Line 47:

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Torch welder\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Torch welder\|
-	*The device which ~~was~~ used to attach restraining bolts to the various droids. \| \| \| }}	+	*The device which is used to attach restraining bolts to the various droids. \| \| \| }}

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Droid caller\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Droid caller\|

← Older revision		Revision as of 16:36, 12 April 2013
Line 38:		Line 38:

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Vest\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Vest\|
-	*Vest made of tan textured fabric. If used, the vest must ~~been~~ weathered. \| \| \| }}	+	*Vest made of tan textured fabric. If used, the vest must be weathered. \| \| \| }}

	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Ion Blaster\|		{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Ion Blaster\|

← Older revision		Revision as of 15:13, 12 April 2013
Line 10:		Line 10:
	{{CRLrequirements}}		{{CRLrequirements}}

-	{{CRLtemplate-nolevels\|File:Blankwhite.gif\| ~~Helmet /~~ Mask\|	+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Mask\|
-	*~~Mask:~~ The mask is ~~basically a~~ base upon which to mount two glowing eyes. Only the illuminated eyes should be visible, making it ideal to wear the mask under the shroud. The glowing eyes should glow, not project, so do not use mini-flashlights or other reflector beams that shoot light out. A simple incandescent lamp or non-directional LED is ideal. The diameter of the light should not exceed 3/4” (5cm).	+	*The mask is base upon which to mount two glowing eyes.
-	*Face Shroud: The face shroud ~~should~~ be a ~~breathable,~~ black ~~covering~~ that hides the head of the costumer, ~~but allows~~ for necessary vision and air circulation ~~(such as~~ a ~~tight~~ mesh).	+	*Face Shroud/mask: The face shroud must be constructed of a black material or short black fur that hides the entire head and face of the costumer (No skin may be visible). To help conceal everything, and still allow for necessary vision and air circulation, a black mesh fabric may be used to cover over the top of the completed mask and eyes as long as the eyes can be seen when lit.
-	*~~The hood should be made of material that matches~~ the ~~robes~~, ~~preferably~~ the ~~appropriate herringbone Ralph Lauren blanket, Monk’s cloth, or similar textured material, and~~ should be ~~a rusty brown color~~. The ~~hood~~ should ~~have~~ a ~~wire reinforcement sewn into the face opening to keep the hood open for visibility and look~~. A ~~solid core, coated wire of 12~~ or ~~14 gauge metal~~ is ~~recommended~~. The ~~flaps at the bottom of the face opening should overlap as seen~~ in ~~the films~~. \| \|  }}	+	* Eyes: When the mask is worn with the costume, only the illuminated eyes should be visible from inside the hood. The eyes should "glow", not "project" meaning, the use of mini-flashlights or other reflectors that emit a beam of light is incorrect. A simple incandescent lamp or non-directional LED is ideal. The eyes must be yellow or amber in color and not exceed 1 inch/3cm in diameter. \| \|  }}

-	{{CRLtemplate\|File:Blankwhite.gif\|~~Robe(s)~~\|	+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Hood\|
-	*The robe ~~should be~~ of the ~~appropriate herringbone Ralph Lauren blanket, Monk’s~~ cloth, or similar textured ~~material, and should~~ be ~~a rusty brown color~~. The ~~openings~~ of the ~~sleeves and robe bottom should~~ be ~~flared, unhemmed and frayed~~. ~~Cottons are recommended for cost,~~ look, ~~feel, breath-ability,~~ and ~~ease~~ of ~~care~~. \| \|  }}	+	*The hood is a separate piece from the robe and is not connected to it. The hood is made of the same material as the robe. Brown monks cloth or a similar textured fabric is to be used. The inside of the hood must be lined with solid black fabric. To achieve the correct look and maintain proper visibility, a wire or plastic reinforcement is sewn into the face opening. The flaps at the bottom of the face/hood opening should overlap and wrap around as seen in the films. The hood may show signs of weathering. \| \|  }}

		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Robe\|
		+	*Brown monks cloth or a similar textured fabric is to be used to construct the robe. The robe must be sewn closed or have an off center (to the side) opening that runs the length of the garment. No visible seams should appear. The openings of the sleeves and robe bottom must be not be hemmed and must also be tattered and frayed. The finished robe must be weathered. \| \|  }}

		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Gloves\|
		+	*The gloves must be constructed of black cloth or black leather. Gloves must cover hands and entire wrist. Black short fur may be attached to the gloves on top of the hands. \| \|  }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Boots\|
		+	*The boots must be wrapped in the same brown textured fabric as used to construct the hood and robe. The boots must be tall enough to cover the mid-shin or higher. The boots must be weathered in the same manner as the hood and robe. \| \|  }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Undergarments\|
		+	*Black or brown undergarments should be used to cover the arms, legs, and any other areas where skin or clothing might be exposed. This is to ensure that no skin or clothing is visible at anytime. \| \|  }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Bandoliers\|
		+	*At least one bandolier must be worn. Acceptable versions of the bandolier consist of Swedish, British, NZ, Australian, Canadian, and German. The bandoliers may be purchased originals or accurately fabricated reproductions. They must be made of brown/black leather or similar looking material.
		+	*The bandolier(s) must be aged and weathered. All metal pieces should be dull, worn and scuffed. The metal pieces should not appear new and shiny or have a shine to them.
		+	*More than one bandolier may be worn at the same time. Acceptable configurations include: One bandolier across the shoulder to the waist, two crisscrossed across the chest to the waist, one across the chest and one around the waist, two crisscrossed across the chest and one around the waist. \| \|  }}
		+
		+	{{CRLaccessories}}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Vest\|
		+	*Vest made of tan textured fabric. If used, the vest must been weathered. \| \| \| }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Ion Blaster\|
		+	*This is the Jawa's weapon of choice. \| \| \| }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Holster\|
		+	*The holster in which to carry the Ion Blaster. \| \| \| }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Torch welder\|
		+	*The device which was used to attach restraining bolts to the various droids. \| \| \| }}
		+
		+	{{CRLtemplate-nolevels\|File:Blankwhite.gif\|Droid caller\|
		+	*The hand held device which is used to discover the whereabouts and gain the attention of droids. \| \| \| }}

	{{CRLfooter\|Krayt_Clan_CRL\|D}}		{{CRLfooter\|Krayt_Clan_CRL\|D}}