crlblackhd.gif
Juno Eclipse, Rogue Shadow
Juno Eclipse Rogue Shadow.jpg
Model Juno Eclipse, Rogue Shadow, Photo by Unknown


Imperial-Officer-Corps.png

Description: Juno Eclipse, Rogue Shadow
Prefix: ID
Detachment: Imperial Officer Corps
Context: The Force Unleashed

Having been a skilled TIE pilot who led Vader's Black Eight Squadron, the Dark Lord appointed Captain Juno Eclipse as the pilot of the vessel "Rogue Shadow", an advanced technology ship primarily designed for stealth and infiltration purposes. Although uncertain of the nature of her missions, Eclipse welcomed the opportunity to fly such a unique starship.


The 501st approval requirements are listed in black.

The Imperial Officer Corp Detachment defines additional, optional levels of costuming excellence. In the page below, items listed in blue are optional features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.


This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
  • Any uncertainties or questionable aspects of the submitted costume should be brought to the appropriate DL/GML peer review section of the legion forum.
Required Costume Components

The following costume components are present and appear as described below.


ID hat black.jpg Imperial Hat, black
For 501st approval:
  • Fabric is a medium weight suiting material matching the pants and tunic if applicable.
    • Gabardine style weave is most accurate.
  • Base of the hat is conical, with a crown about 4" (101.6 mm) tall.
  • Front and rear "flaps" overlap on the sides and are about 4" (101.6 mm) high.
  • Front bill extends 3" down, decorated with 6 or 7 concentric stitches.
  • Imperial Code Disk is positioned in the center of the front vertical "flap."
For level two certification (if applicable):
  • Code Disk has a notch detail on the outermost disk.
For level three certification (if applicable):
  • Code disk exactly matches screen-used prop.
ID juno hair.jpg Hair Style
For 501st approval:
  • Hair is be blonde.
    • This can be achieved via natural hair color or a wig.
  • Worn in a French twist.
  • Hair style and color match published images.
For level two certification (if applicable):
  • If a wig is worn, it gives the appearance of natural hair.
Juno Shirt.jpg Grey Tank Top
For 501st approval:
  • Grey tank top style undershirt worn under the tunic.


ID juno gloves.jpg Gloves
For 501st approval:
  • Open back, full-fingered driver gloves.


Juno Tunic.jpg Jacket/ Tunic
For 501st approval:
  • Waist length, fitted officer-like black jacket with high collar.
  • Breast panels present but folded back (or made to give the appearance of being folded back.
  • 3/4-length sleeves
  • Tailored via 2 princess seams in the back.
For level two certification (if applicable):
  • Tunic is neat and snugly fitted to the costumer.
  • Tunic length ends at the top of the belt.
  • There is no top-stitching visible anywhere.
  • There is a lining sewn in.
ID juno rank.jpg Rank Bar
For 501st approval:
  • Worn on the left side of the tunic over the heart.
  • Rank consists of colored plastic tiles mounted on metal bar.
  • Rank tiles are 4 amber and 2 red (from left to right), made of some type of plastic (i.e. plexiglass, acrylic, etc.)
  • Yellow tiles are not acceptable.
  • Rank tile dimensions are approx. 1/2" (12.7 mm)width x 3/4" (19 mm) height and about 1/8" (3.2 mm).
  • Tiles are mounted with approx. 1/4" (6.4 mm) spaces between them.
For level two certification (if applicable):
  • Rank bar dimensions are relative to the costumer (i.e. not excessively large, or too small for the person’s frame).
Code Cylinders02.jpg Code Cylinders
For 501st approval:
  • (2) code cylinders, one on each side of the tunic.
  • Basic Style: Silver "chalk holder" tube with a short clip. Top is colored Blue.
  • Dosimeter Style: True Dosimeter with correct clip and Blue top.
For level two certification (if applicable):
  • Only real or replica dosimeters are used.


ID belt.jpg Belt
For 501st approval:
  • The belt is constructed from a non-textured leather or a leather-like material.
  • Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable.
  • There are no loops on the belt.
  • A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle.
    • The belt may be worn with the snap to the right or left of the wearer.
  • The buckle is constructed from a horizontally brushed metal, or metal looking material.
  • The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners.
  • Buckle is adorned with an Imperial Code Disk at the center.
    • Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.
For level two certification (if applicable):
  • Belt is made of leather.
  • Snap is worn to the left of the wearer.
  • Buckle has a slight horizontal curve.
Juno Trousers.jpg Leggings
For 501st approval:
  • Fitted black trousers
  • May be made from a stretch material or from the same fabric as the jacket.
For level two certification (if applicable):
  • Leggings are tightly fitted to the costumer with no visible pockets.


ID Officer Boots.jpg Officer Boots
For 501st approval:
  • Knee-high, black, lace-less, smooth non-textured, leather or leather-like material.
    • Rubber is not acceptable.
    • PVC or synthetic material is allowed as long as it gives the appearance of leather.
  • There are no stretch panels, buckles, snap tabs, or decoration.
  • Boots have conservative heels.
  • If zippers are present, they are hidden on the inner part of the boot shaft.
    • Not visible from the front, side or back.
  • The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style.
For level two certification (if applicable):
  • Boots do not have a zipper.
For level three certification (if applicable):
  • Boots are made of leather.
    • Not vinyl or PVC.
  • Exact replicas of English riding (dress) boots or Equestrian boots.

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:ID_juno_eclipse_rogue_shadow

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.