|
| Imperial Officer
|
|
Model MODEL NAME, Photo by PHOTOGRAPHER NAME
|
|
|
|
Description: Imperial Officer
Prefix: ID
Detachment: Imperial Officer Corps
Context: Star Wars Episodes IV - IV and Expanded Universe
|
|
|
| This CRL is a work in progress and is not yet ready to use for GML approval!
|
|
| Hat
For 501st approval:
- Fabric should be a medium weight suiting material exactly matching the tunic and pants. Gabardine style weave is most accurate.
- Base of the hat should be conical, with a crown about 4" (101.6 mm) tall.
- Front and rear "flaps" should overlap on the sides and be about 4" (101.6 mm) high.
- Front bill extends 3" down, decorated with 6 or 7 concentric stitches.
- Imperial Code Disk positioned in the center of the front vertical "flap."
|
For level two certification (if applicable):
|
For level three certification (if applicable):
|
|
|
| 150px
| Imperial Code Disk
For 501st approval:
- A stepped cone shape appearing to be 3 disks stacked on top of one another.
- The bottom disk is 1" (25.3 mm) the middle disk is 3/4" (19.1 mm) and the top disk is 1/2" (12.7 mm.)
- There is an indentation in the center of the top disk about 1/4" (6.4 mm)
|
For level two certification (if applicable):
|
For level three certification (if applicable):
|
|
|
| 150px
| Tunic
For 501st approval:
- Fabric should be a medium weight suiting material exactly matching the pants and hat. Gabardine style weave is most accurate. Color options are black or olive-greyish green.
- Tunic is double-breasted with a left over right closure on the tapered yoke.
- Yoke comes up across the shoulder to the top shoulder seam.
- The standing collar has square corners and is about 1.25" (31.8 mm) tall and closes snugly and includes a modesty panel behind closure. Collar edges are closed with two eye hooks.
- There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
- Sleeves are long, and without decoration, cuffs or buttons, containing 2 seams, one along the bottom and one along the back.
- Tunic should be constructed with no top-stitching (stitches visible on the exterior surface of fabric)
|
For level two certification (if applicable):
- There is a dart of about 2" (50.8 mm) in the top center of the yoke.
- Additionally there is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
- The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center.
|
For level three certification (if applicable):
|
|
|
| 150px
| Rank Bar
For 501st approval:
- Worn on the left side of the tunic over the heart.
- Rank consists of colored plastic tiles mounted on metal bar.
- Each bar is 1" (25.4 mm) height, length is determined by chosen rank
- Rank tile dimensions are 1/2" (12.7 mm)width x 3/4" (19 mm) height and about 1/8" (3.2 mm).
- Tiles should be mounted with 1/4" (6.4 mm) spaces between them.
|
For level two certification (if applicable):
- Rank tiles are translucent. Color quantity and combinations are determined by rank, and should be appropriate to uniform type (examples: no Grand Moffs wore black uniforms with hats, Grand Admiral rank should match Grand Admiral uniform, etc.).
|
For level three certification (if applicable):
Double-row ranks should be constructed from separate pieces of one row each, rather than two rows of caps on a single metal backing piece.
|
|
|
| PART NAME (USE THIS TEMPLATE AS OFTEN AS NEEDED)
For 501st approval:
- LIST OF
- 501st MINIMUM
- REQUIREMENTS
|
For level two certification (if applicable):
- LIST OF LEVEL 1 REQUIREMENTS
- OR USE A SPACE TO LEAVE BLANK
|
For level three certification (if applicable):
- LIST OF LEVEL 2 REQUIREMENTS
- OR USE A SPACE TO LEAVE BLANK
|
|
|
|
NAVIGATION
|
