(Difference between revisions)
 
(20 intermediate revisions not shown)
Line 1: Line 1:
-
{{CRLheader|Clone Trooper|File:.jpg|}}
+
{{CRLheader|Clone Trooper - Phase II|File:Clonetrooper_Phase2_Standard.jpg|Clonetrooper - Phase II|none}}
-
{{CRLdetinfo| 1111 |Clone Trooper|TC|Episode III: Revenge of the Sith|
+
{{CRLdetinfo| 1111 |Clone Trooper - Phase II|TC|Episode III: Revenge of the Sith|
-
Clone troopers were an army of identical, genetically-modified clones of Jango Fett, created to serve in the Grand Army of the Republic during the conflict that came to be known as the Clone Wars. Cloned and raised in the cities of Kamino, the clone  troopers trained and drilled since birth, and came to be regarded as one of the most efficient military forces ever to have existed in galactic history. This was not only due to their training, but also to their unwavering loyalty to the Galactic Republic and its leader, Supreme Chancellor Palpatine.  
+
 
 +
Clone troopers are an army of identical, genetically-modified clones, created to serve in the Grand Army of the Republic during the conflict known as the Clone Wars. Cloned and raised in the cities of Kamino, the clone  troopers have trained and drilled since birth. They are regarded as one of the most efficient military forces ever to have existed in galactic history. This is not only due to their training, but also their unwavering loyalty to the Galactic Republic and its leader, Supreme Chancellor Palpatine.
{{RL_approved}}}}
{{RL_approved}}}}
Line 13: Line 14:
{{CRLtemplate|File:E3 Clone Helmet.jpg | Helmet|
{{CRLtemplate|File:E3 Clone Helmet.jpg | Helmet|
-
*Episode 3 style Clone Helmet - Fanmade bucket. Some "name brand" helmets may be unacceptable.
+
*Phase 2 (Episode 3) style helmet.
-
*Helmet must be painted matte or satin white.
+
**Some "name brand" helmets may be unacceptable.
-
*Visor - Mirrored Chrome or Black Visor
+
*Helmet is painted matte or satin white.
-
*Mohawk on dome has raised edges on the outside edges of the top.
+
*Mohawk on dome has raised outside edges.
-
*Tube stripes on each side are dark blue in color. There are 9 stripes per side
+
*Bar above the eye lens wraps around the sides and is painted black.
-
*Frown is charcoal grey in color and has 7 teeth 1 in the middle and three on each side. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
+
*Mirrored Chrome or Black eye lens.
-
*Primer grey stripe around back of dome.
+
*Frown is charcoal grey in color with 7 teeth.
-
*Bar above the visor wrapping around the sides is painted black.
+
**(1) in the middle and three on each side.
-
*Vocoder (chip detail) is painted black.
+
**Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
 +
*Vocoder (chin detail) is painted black.
*Aerators (cylinders on either side of the vocoder) are painted black, with the center round part painted silver.
*Aerators (cylinders on either side of the vocoder) are painted black, with the center round part painted silver.
-
*Ear bars are painted a dark grey. The raised edge around the ear cap is painted black.
+
*Ear bars are painted a dark grey.
-
*Rectangular “grid” on back of helmet painted black.|
+
**The raised edge around the ear cap is painted black.
-
*Helmet has the appearance of a neck ring. |
+
*Tube stripes on each side are dark blue in color.
-
*Helmet has an enclosed complete neck ring that seals the helmet to the neck. }}
+
**(9) stripes per side.
 +
*Primer grey stripe around back of dome.
 +
*Rectangular “grid” on back center of helmet painted black.
 +
*Armor is weathered with shades of grey.|
 +
*Helmet has the appearance of a neck ring.|
 +
*Helmet has an enclosed complete neck ring that seals the helmet to the neck.}}
-
{{CRLtemplate|File:IMG 0411.jpg|Neck Seal|
+
{{CRL-realistic-clone-neckseal}}
-
*Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible.
+
-
*If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.|
+
-
*Neck seal to be black in color with vertical ribbing. |}}
+
-
{{CRLtemplate|File:TK_anh_stunt_undersuit.jpeg|Under Suit|
+
{{CRL-generic-undersuit}}
-
* Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.| | }}
+
-
{{CRLtemplate|File:Clone shoulder bells copy.jpg|Shoulder Bells|
+
{{CRLtemplate-nolevels|File:Clone shoulder bells copy.jpg|Shoulder Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Shoulders should be tear drop in shape with all rounded edges. | |
+
*Shoulders are tear drop in shape with all rounded edges.
-
*Shoulder bells should not be symmetrical. The Shoulder bells should slightly curve back at the bottom of the shoulder. }}
+
*Shoulders are not symmetrical.  
 +
**The shoulders slightly curve back at the bottom.
 +
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:Clone bicept copy.jpg|Upper Arm Armor|
+
{{CRLtemplate-nolevels|File:Clone_Biceps.jpg|Upper Arm Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Should have a dimple on the lower area of the back of the arm. The outside must have a hard line edge at the front that turns in. The inside of the upper arm should be rounded.
+
*A dimple on the lower area of the back of the arm.
-
*Armor should be seamless. No visible traces of how the armor was assembled should be shown. | |}}
+
*The outside of the bicep has a hard line edge at the front that turns in.
 +
*The inside of the upper arm is rounded.
 +
*Armor is seamless.
 +
**No visible traces of how the armor was assembled are shown.
 +
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:Clone elbow copy.jpg|Elbow Armor|
+
{{Elbow_Armor_Realistic}}
-
*Armor should be painted matte or satin white
+
-
*There are two elbows. On each elbow on the outside of the body near the connection point of the elbow strap there should be detail slots that look like an equal symbol on both elbow pieces.
+
-
* Both elbows have strapping.  The straps should have a raised detail line at the top and bottom of the strap.| |
+
-
*Elbows should be mirror images of each other with a notched area on the outside of the elbow above the detail marks.}}
+
{{CRLtemplate|File:Clone gauntlets copy.jpg|Forearm Armor|
{{CRLtemplate|File:Clone gauntlets copy.jpg|Forearm Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Both left and right forearms should be mirror images of each other.
+
*Forearms are mirror images of each other.
-
*Right forearm should have a compad that has 8 small buttons in 2 rows of 4,1 Large main button, and 1 slightly smaller rectangular button at the top closer to the elbow.
+
*Right forearm has a compad with 8 small buttons,1 Large main button, and 1 slightly smaller rectangular button.
-
*Forearm tops should have a flattened triangular area that starts at the wrist and becomes a ridge that comes to a point at the top of the forearm.  
+
*Forearm tops have a flattened triangular area with a ridge that comes to a point at the top of the forearm.
-
*Armor should be seamless. No visible traces of how the armor was assembled should be shown. | |
+
*Armor is seamless.
-
*Compad has detail antenna on its left.
+
**No visible traces of how the armor was assembled are shown.
-
*Instead of a hard edge the top of the forearm has a bone ridge.}}
+
*Armor is weathered with shades of grey.|
 +
*Compad has detail antenna on its left.|
 +
*Instead of a hard edgethe top of the forearm has a bone ridge.}}
-
{{CRLtemplate|File:Clone hand guards copy.jpg|Hand Plates|
+
{{Hand_Plates_Realistic}}
-
*Armor should be painted matte or satin white
+
-
*Hand plates are mirror images of each other. 
+
-
*Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand. | | }}
+
-
{{CRLtemplate|File:Generic-black-gloves.jpg|Gloves|
+
{{CRL-generic_black_gloves}}
-
*Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. | | }}
+
-
{{CRLtemplate|File:Clone chest copy.jpg|Chest Armor|
+
{{CRLtemplate-nolevels|File:Clone chest copy.jpg|Chest Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Two detail slots on the bottom right of the right breast.
+
*Two detail slots on the bottom right of the right chest.
-
*Chest and back plate should match together at the sides with no gap, just a seam line.  
+
*Chest and Back armor match together at the sides with no open gap.
-
*Shoulder straps should be placed underneath the chest to connect to the back. |
+
**A seam line is present.
-
|
+
*Shoulder straps are slotted into the chest into the detail ridges of the top connection points.
-
* Shoulder straps should be slotted into the chest into the detail ridges of the top connection points. }}
+
*Shoulder straps are slotted into the detail ridges of the top connection points.
 +
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:Clone back.jpg|Back Armor|
+
{{CRLtemplate-onelevel|File:Clone back.jpg|Back Armor|
-
*Armor should be painted matte or satin white.
+
*Realistic style back armor.
-
*Rear tank has detailed area that contains 4 circles. Under the circles at the left side of the back there should be two parallel lines and the the right of the back there should a be a squared detail.
+
*Armor is painted matte or satin white.
-
*Chest and back plate should match together at the sides with no gap, just a seam line.  
+
*Back has a detail plate with four circles on top, two elongated areas on left, and vents on lower right.
-
*Shoulder straps should be placed underneath the chest to connect to the back. |
+
*Back and Chest armor match together at the sides with no open gap.
-
|
+
**A seam line is present.
-
*Shoulder straps should be slotted into the Back into the detail ridges of the top connection points.
+
*Shoulder straps are slotted into the detail ridges of the top connection points.
-
*Highly detailed resin insert should replace softer details. }}
+
*Armor is weathered with shades of grey.|
 +
*Highly detailed resin Back box plate cover with circuitry insets.|}}
-
{{CRLtemplate|File:Clone abb2.jpg|Ab Armor|
+
{{CRLtemplate-onelevel|File:Clone abb2.jpg|Abdomen Armor|
-
*Armor should be painted matte or satin white.
+
*Realistic style abdomen Armor  
-
*Four 1/4" diameter holes per side on indents of ab plate, eight holes total.
+
*Armor is painted matte or satin white.
-
*Ab section should wrap around the wearers body and be sealed at the sides or at the back.
+
*Eight 1/4" diameter holes, with four holes inside each indented channel of the abdomen.
-
*Ab section should be completely contained under the chest and back armor. |
+
*Abdomen armor wraps around the wearers body and is sealed at sides or back.
-
|
+
*Abdomen is completely contained under the chest and back armor.
-
* Ab section should be seamless at the sides and close in the back. A detail plate should cover the seam line and hide all work.}}
+
*Abdomen is seamless at the sides and closed in the back.
 +
*Armor aligns with codpiece with the seam line hidden by the belt.  
 +
*Armor is weathered with shades of grey.|
 +
*Seam line along sides or back has no gap.|}}
-
{{CRLtemplate|File:CLone cod and rear.jpg|Cod and Posterior Armor|
+
{{CRLtemplate-onelevel|File:CLone cod and rear.jpg|Cod and Posterior Armor|
-
*Armor should be painted matte or satin white.
+
*Realistic style Codpiece and posterior armor.
-
*Cod and Posterior armor should connect at the hips. | |
+
*Armor is painted matte or satin white.
-
*Hips should be connected via a snap with the correct detailed shape of the armor at the connection point. }}
+
*Cod and Posterior armor connect at the hips.
 +
*Armor is weathered with shades of grey.|
 +
*Hips have correct detail connector snap and edge feature at the codpiece and posterior side connection.|}}
-
{{CRLtemplate|File:Clone Belt copy.jpg|Belt|
+
{{Belt_Realistic}}
-
*Armor should be painted matte or satin white.
+
-
*Ammo Belt with boxes and detonator.
+
-
*Detonator is centered on the back of belt.
+
-
*8 boxes total, 4 on each side of abdomen and attached to the belt. |
+
-
|
+
-
*Belt Boxes should be notched and fitted flush with the details of the belt.
+
-
*Left Rear belt box should have two square buttons in the top left corner and and equal symbol detail at the bottom right.
+
-
*Right Rear belt box should have a bar with two small cylinders centered with and equal symbol detail on the bottom left.
+
-
*From the rear two belt boxes the belt should have a ribbed detailed appearance.}}
+
-
{{CRLtemplate|File:Clone thighs.jpg|Thigh Armor|
+
{{CRLtemplate-onelevel|File:Clone thighs.jpg|Thigh Armor|
-
*Armor should be painted matte or satin white.  
+
*Armor is panted matte or satin white.
-
* Front of thigh armor should have a flat triangular area near the knee.  From the top of the triangle a ridge line should go up the front of the thigh to the top.
+
*Thigh Armor has a flat triangle area above the knee which transitions to a ridge line that travels up the front of the thigh to the top edge.
-
*Bottom rear of the thigh should have an indentation.
+
*Rear of armor has an indented area.
-
*Armor should be seamless. No visible traces of how the armor was assembled should be shown. |
+
*Armor is seamless.
-
|
+
**No visible traces of how the armor was assembled are shown.
-
* Outside of lower portion of the thighs should come to a point and inner lower end should be rounded.}}
+
*Armor is weathered with shades of grey.|  
 +
*Outside lower portion of the thighs come to a point and inner lower end is rounded.|}}
-
{{CRLtemplate|File:Clone knees copy.jpg|Knee Armor|
+
{{CRLtemplate-onelevel|File:Clone knees copy.jpg|Knee Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Knees should wrap around the front of the leg. From top center a raised detail line should be present.
+
*Knees wrap around the front of the leg.
-
*Knees should be strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.|
+
*From top center a raised detail line is present.
-
|
+
*Knees are strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.|
-
*Center strap should be primer gray.
+
*Center strap is primer grey.
-
*Connection between the knee and the strapping should have a detail clip.}}
+
*Connection between the knee and the strapping has a detail clip.|}}
-
{{CRLtemplate|File:Clone shins.jpg|Lower Leg Armor|
+
{{CRLtemplate-onelevel|File:Clone shins.jpg|Lower Leg Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Lower Legs are mirror images of each other. The front of the armor should have a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
+
*Lower Legs are mirror images of each other.
-
*Back of the lower legs should have an indentation just under the calf the follow down to the ankle.
+
*The front of the armor has a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
-
*Calf can have an access area on the inside of the leg.  The outside of the calf should be closed. |
+
*Back of the lower legs have an indentation just under the calf that travels down to the ankle.
-
|
+
*The outside of the calf is closed.
-
*Calves should be seamless and have a trap door access through the indent in the rear of the lower leg.
+
**Calf can have an access area on the inside of the leg.|
-
*Outside of the lower leg should have a pointed tip at the top and the inside of the lower leg should be rounded off at the top.}}
+
*Calves are seamless and have a trap door access through the indent in the rear of the lower leg.|}}
-
{{CRLtemplate|File:Clone shoes copy.jpg |Boots|
+
{{CRL-cloneboots-realistic}}
-
*White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor.
+
-
* Boots must be lace-less and have flat soles.
+
-
*The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap.
+
-
* This strap shall be white to match the boot.
+
-
*There shall be no markings or labels from the shoe makers. The shoe soles should be gray. | | }}
+
{{CRLaccessories}}
{{CRLaccessories}}

Latest revision as of 13:22, 13 August 2014

crlblackhd.gif
Clone Trooper - Phase II
Clonetrooper Phase2 Standard.jpg
Model Clonetrooper - Phase II, Photo by none


Clone-Trooper-Detachment.png

Description: Clone Trooper - Phase II
Prefix: TC
Detachment: Clone Trooper Detachment
Context: Episode III: Revenge of the Sith

Clone troopers are an army of identical, genetically-modified clones, created to serve in the Grand Army of the Republic during the conflict known as the Clone Wars. Cloned and raised in the cities of Kamino, the clone troopers have trained and drilled since birth. They are regarded as one of the most efficient military forces ever to have existed in galactic history. This is not only due to their training, but also their unwavering loyalty to the Galactic Republic and its leader, Supreme Chancellor Palpatine.

Please note that this costume is also eligible for membership in The Rebel Legion.


The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
  • Any uncertainties or questionable aspects of the submitted costume should be brought to the appropriate DL/GML peer review section of the legion forum.
Required Costume Components

The following costume components are present and appear as described below.

E3 Clone Helmet.jpg Helmet
For 501st approval:
  • Phase 2 (Episode 3) style helmet.
    • Some "name brand" helmets may be unacceptable.
  • Helmet is painted matte or satin white.
  • Mohawk on dome has raised outside edges.
  • Bar above the eye lens wraps around the sides and is painted black.
  • Mirrored Chrome or Black eye lens.
  • Frown is charcoal grey in color with 7 teeth.
    • (1) in the middle and three on each side.
    • Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
  • Vocoder (chin detail) is painted black.
  • Aerators (cylinders on either side of the vocoder) are painted black, with the center round part painted silver.
  • Ear bars are painted a dark grey.
    • The raised edge around the ear cap is painted black.
  • Tube stripes on each side are dark blue in color.
    • (9) stripes per side.
  • Primer grey stripe around back of dome.
  • Rectangular “grid” on back center of helmet painted black.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Helmet has the appearance of a neck ring.
For level three certification (if applicable):
  • Helmet has an enclosed complete neck ring that seals the helmet to the neck.


Clone trooper neck seal.jpg Neck Seal
For 501st approval:
  • Neck seal is black in color with vertical ribbing or being smooth in appearance.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.



TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


Clone shoulder bells copy.jpg Shoulder Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Shoulders are tear drop in shape with all rounded edges.
  • Shoulders are not symmetrical.
    • The shoulders slightly curve back at the bottom.
  • Armor is weathered with shades of grey.


Clone Biceps.jpg Upper Arm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • A dimple on the lower area of the back of the arm.
  • The outside of the bicep has a hard line edge at the front that turns in.
  • The inside of the upper arm is rounded.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Armor is weathered with shades of grey.



Clone elbow copy.jpg Elbow Armor
For 501st approval:
  • Realistic style elbow armor.
  • Armor is painted matte or satin white.
  • Elbow straps have a raised detail line at the top and bottom of the strap.
  • Armor has two parallel dashed detail slots on each outside edge of elbow at the strap connection.
  • Elbows are mirror images of each other with a notched area on the outside of the elbow above the detail marks.
  • Armor is weathered with shades of grey.


Clone gauntlets copy.jpg Forearm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Forearms are mirror images of each other.
  • Right forearm has a compad with 8 small buttons,1 Large main button, and 1 slightly smaller rectangular button.
  • Forearm tops have a flattened triangular area with a ridge that comes to a point at the top of the forearm.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Compad has detail antenna on its left.
For level three certification (if applicable):
  • Instead of a hard edge, the top of the forearm has a bone ridge.


Clone Hand Guards.jpg Hand Plates
For 501st approval:
  • Realistic style hand plates.
  • Armor is painted matte or satin white
  • Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand.
  • Armor is weathered with shades of grey.



Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.


Clone chest copy.jpg Chest Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Two detail slots on the bottom right of the right chest.
  • Chest and Back armor match together at the sides with no open gap.
    • A seam line is present.
  • Shoulder straps are slotted into the chest into the detail ridges of the top connection points.
  • Shoulder straps are slotted into the detail ridges of the top connection points.
  • Armor is weathered with shades of grey.


Clone back.jpg Back Armor
For 501st approval:
  • Realistic style back armor.
  • Armor is painted matte or satin white.
  • Back has a detail plate with four circles on top, two elongated areas on left, and vents on lower right.
  • Back and Chest armor match together at the sides with no open gap.
    • A seam line is present.
  • Shoulder straps are slotted into the detail ridges of the top connection points.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Highly detailed resin Back box plate cover with circuitry insets.
Clone abb2.jpg Abdomen Armor
For 501st approval:
  • Realistic style abdomen Armor
  • Armor is painted matte or satin white.
  • Eight 1/4" diameter holes, with four holes inside each indented channel of the abdomen.
  • Abdomen armor wraps around the wearers body and is sealed at sides or back.
  • Abdomen is completely contained under the chest and back armor.
  • Abdomen is seamless at the sides and closed in the back.
  • Armor aligns with codpiece with the seam line hidden by the belt.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Seam line along sides or back has no gap.
CLone cod and rear.jpg Cod and Posterior Armor
For 501st approval:
  • Realistic style Codpiece and posterior armor.
  • Armor is painted matte or satin white.
  • Cod and Posterior armor connect at the hips.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Hips have correct detail connector snap and edge feature at the codpiece and posterior side connection.


Clone Belt copy.jpg Belt
For 501st approval:
  • Realistic style belt, boxes, and detonator.
  • Belt, boxes and detonator are painted matte or satin white.
  • Belt front, between front boxes, has three vertical rectangle indents which are spaced apart by two protruding rectangle areas.
    • The rest of the belt is flat surfaced with raised edging on top and bottom that run along the rest of the belt.
  • Eight Belt Boxes are attached to Belt, with four on each side.
    • The two largest Boxes are in front with angled top surface that is higher toward the center.
    • The smallest boxes are located behind the front boxes, about 1/8 inch apart and have an angled end on top.
    • The medium sized matching boxes, with flat top cover, are about 1/8 inch from smallest boxes.
    • Left rear box is spaced closer to detonator and has two square buttons in the top left corner, and two dashed indented detail marks on bottom right.
  • Right rear box is spaced closer to detonator and has a bar with two small cylinders centered, and two dashed indented detail marks on bottom left.
  • A detonator is centered and attached to back of Belt.
    • Detonator tube is about 2 1/4 inch diameter with wider detailed end caps.
    • Seven horizontally aligned square buttons are on left side of tube, facing backwards.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Boxes are notched on back and fit flush to belt.
For level three certification (if applicable):
  • Back of belt, between rear boxes, has horizontal ribbing.
  • Detonator connects to back of belt without any visible clips and is firmly secured in horizontal position.
Clone thighs.jpg Thigh Armor
For 501st approval:
  • Armor is panted matte or satin white.
  • Thigh Armor has a flat triangle area above the knee which transitions to a ridge line that travels up the front of the thigh to the top edge.
  • Rear of armor has an indented area.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Outside lower portion of the thighs come to a point and inner lower end is rounded.
Clone knees copy.jpg Knee Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Knees wrap around the front of the leg.
  • From top center a raised detail line is present.
  • Knees are strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.
For level two certification (if applicable):
  • Center strap is primer grey.
  • Connection between the knee and the strapping has a detail clip.
Clone shins.jpg Lower Leg Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Lower Legs are mirror images of each other.
  • The front of the armor has a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
  • Back of the lower legs have an indentation just under the calf that travels down to the ankle.
  • The outside of the calf is closed.
    • Calf can have an access area on the inside of the leg.
For level two certification (if applicable):
  • Calves are seamless and have a trap door access through the indent in the rear of the lower leg.


Clone shoes copy.jpg Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle.
  • Boots are lace-less.
  • The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap.
  • There are no markings or labels from the shoe makers.
  • Boot soles are flat.
  • Boot soles are colored primer grey.


Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.


DC15 carbine.jpg DC-15S Blaster
For 501st approval:

Manufactured by BlasTech Industries the DC-15S is smaller in scale than the DC-15A blaster rifle. Although it has a shorter range than that of the "A" model, it is easier to handle with a higher rate of fire. It features a folding stock for braced firing.

  • Realistic Clone Style DC-15S Blaster.
  • Blaster may be scratch built out of plastic, wood, metal or cast in resin.
  • Blaster has realistic Episode II or Episode III details:
    • Wire frame sight.
    • Folding stock.
    • (12) radiator fins evenly spaced along the length of barrel.
    • Igniter detail knobs.
    • Charge magazine clip on right side.
  • Total length is approximately 26“ (66 cm).
  • Because of the scale, the Hasbro version is incorrect.
For level two certification (if applicable):
  • Charge magazine detail on clip is metal to gun metal grey in color.
  • Detail bolts and screws are metal to gun metal grey in color.
  • Igniter knobs have some copper coloring.
  • Blaster is weathered.
For level three certification (if applicable):
  • Functioning Blue LED is installed in barrel.


DC15 rifle.jpg DC-15A Blaster Rifle
For 501st approval:

Manufactured by BlasTech Industries, the DC-15A is a tibanna gas, cartridge powered weapon. Hyper-ionized blue plasma bolts are more than capable of penetrating armored units. Exceptionally effective against both droids and contemporary targets.

  • Realistic Clone Style DC-15A Blaster Rifle.
  • Blaster rifle is scratch built out of plastic, wood, metal or cast in resin.
  • Blaster has realistic Episode II or Episode III details:
    • Flip up sight in down position.
    • (10) radiator fins evenly spaced along the length of barrel.
    • Power setting adjuster detail lever.
    • Sniper Scope attached under rifle in storage position.
    • Charge magazine clip on left side.
    • Igniter detail knobs.
  • Total length is approximately 55 inches (139.7 cm).
  • Because of the scale, the Hasbro version is not allowed.
For level two certification (if applicable):
  • Charge magazine detail on clip is metal to gun metal grey in color.
  • Detail bolts and screws are metal to gun metal grey in color.
  • Igniter has some copper coloring.
  • Power setting adjuster detail lever is metal or gun metal grey.
  • Sniper scope is metal or gun metal grey.
  • Blaster is weathered.
For level three certification (if applicable):
  • Functioning Blue LED is installed in barrel.

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.