(Difference between revisions)
(8 intermediate revisions not shown)
Line 7: Line 7:
{{CRLctnlevels}}
{{CRLctnlevels}}
-
{{CRLwiplmoapproval}}
+
{{CRLwipgmlapproval}}
{{CRLrequirements}}
{{CRLrequirements}}
-
{{CRLtemplate|File:Blankwhite.gif|Helmet|
+
{{CRLtemplate-nolevels|File:Blankwhite.gif|Helmet|
-
*Helmet painted matte white.
+
*Armor is painted matte or satin white.
*A large Galactic Republic symbol covers nearly the entire front and top of the helmet dome.
*A large Galactic Republic symbol covers nearly the entire front and top of the helmet dome.
 +
*The blue line across the top of the eye lens extends around to the back of the helmet and converges with the larger blue section on the rear quarter.
*The helmet eye lens and nose area are outlined in blue with the lines converging to a point over the lower chin area.
*The helmet eye lens and nose area are outlined in blue with the lines converging to a point over the lower chin area.
-
*The blue line across the top of the lens extends around to the back of the helmet and converges with the larger blue section on the rear quarter.
 
*The rectangle ear caps are painted grey.
*The rectangle ear caps are painted grey.
-
*Side vent tubes have 6 hash marks on each.
+
*6 vents on each side of helmet.
 +
**Vents may be painted black or grey, or cut out and filled with black mesh.  
*The rear of the helmet has an indented band that is filled with a slightly darker shade of blue than what is on the front of the helmet.
*The rear of the helmet has an indented band that is filled with a slightly darker shade of blue than what is on the front of the helmet.
-
*Each rear quarter of the helmet, from the backside of the earpieces to the center rear section, is painted blue. This includes all four walls of the indented section. This color extends from the upper indented helmet band down to the curved lower collar.
+
*Each rear quarter of the helmet, from the backside of the earpieces to the center rear section, is painted blue, including all four walls of the indented section.
*The center round cap, on the rear of the helmet, is painted grey.
*The center round cap, on the rear of the helmet, is painted grey.
-
*If weathered, the blue areas include heavy scuff marks and fading.
+
*Weathering of blue areas includes various scuff marks and fading.
*Weathering of white areas are shades of grey.||}}
*Weathering of white areas are shades of grey.||}}
-
{{CRLtemplate|File:Blankwhite.gif|Neck Seal|
+
{{CRL-TC_animated_neckseal}}
-
*Neck seal is black in color with vertical ribbing.
+
-
The neckseal stands tall, "turtleneck" style and reaches nearly to the chin.
+
-
*No logos or labels are to be visible.
+
-
*||}}
+
{{CRL-generic-undersuit}}
{{CRL-generic-undersuit}}
-
{{CRLtemplate|File:Blankwhite.gif|Shoulder Bells|
+
{{CRLtemplate-nolevels|File:Dogma_Shoulders.jpg|Shoulder Armor|
-
*Armor painted with a base of matte or satin white.
+
*Armor painted matte or satin white.
-
*Each shoulder has a wide blue stripe down the center.
+
*Shoulders have wide, vertical, center blue stripe.
-
*If weathered, the blue areas include heavy scuff marks and fading.
+
*Shoulders have all rounded edges.
-
*Weathering of white areas are shades of grey.|
+
*Shoulder armor is not symmetrical.
-
*Shoulder bells must be weathered.|}}
+
**The shoulders slightly curve back at the bottom.
 +
*Weathering of blue areas includes various scuff marks and fading.
 +
*Weathering of white areas are shades of grey.||}}
-
{{CRLtemplate|File:Blankwhite.gif|Upper Arm Armor|
+
{{CRLtemplate-nolevels|File:Dogma_Biceps.jpg|Upper Arm Armor|
-
*Armor painted with a base of matte or satin white.
+
*Armor is painted matte or satin white.
-
*Each bicep has a blue stripe down the center which is aligned with the shoulder armor.
+
*Each bicep has a blue vertical stripe down the center which is aligned with the shoulder armor.
-
*If weathered, the blue areas include heavy scuff marks and fading.
+
*Armor is cylindrical with no rear indent.
-
*Weathering of white areas are shades of grey.
+
*Armor is seamless.
-
*Biceps should be seamless.|
+
**No visible traces of how the armor was assembled are shown.
-
*Armor must be weathered.|}}
+
*Weathering of blue areas includes various scuff marks and fading.
 +
*Weathering of white areas are shades of grey.||}}
-
{{CRLtemplate|File:Blankwhite.gif|Forearm Armor|
+
{{CRLtemplate-onelevel|File:Dogma_Forearms.jpg|Forearm Armor|
-
*Armor painted with a base of matte or satin white.
+
*Armor painted matte or satin white.
-
*Front of both forearms have a blue stripe.
+
*Front of each forearm has a blue stripe.
-
*Right forearm must have a compad that has 6 raised buttons, with a larger rectangle above them. A smaller raised section is closest to the elbow.
+
*Right forearm has a compad with 6 raised buttons, with a larger rectangle above them. A smaller raised section is closest to the elbow.
-
*Armor must be seamless on the outside edge. Due to the shape of the armor, a butted seam is acceptable on the inside if required.   
+
*Armor is seamless on the outside edge.
 +
**Due to the shape of the armor, a butted seam is acceptable on the inside if required.   
*Elbow plate is integrated into the forearm armor.
*Elbow plate is integrated into the forearm armor.
-
*Elbow section has blue stripe.
+
*Elbow section has a center blue stripe.
**Stripes on front of forearm and elbow pieces do not align.  
**Stripes on front of forearm and elbow pieces do not align.  
-
*Weathering of blue areas include heavy scuff marks and fading.
+
*Weathering of blue areas includes various scuff marks and fading.
*Weathering of white areas are shades of grey.|
*Weathering of white areas are shades of grey.|
-
*Armor must be seamless. No visible traces of how the armor was assembled should be shown.
+
*Armor is seamless.
-
*Armor must be weathered.|}}
+
**No visible traces of how the armor was assembled are shown.|}}
-
{{CRLtemplate|File:Blankwhite.gif|Hand Plates|
+
{{CRL-TC_animated_handplates}}
-
*Painted with a base color of matte or satin white.
+
-
*If weathered, the weathering should be shades of grey.
+
-
*Hand plates are mirror images of each other.
+
-
*Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.||}}
+
{{CRL-generic_black_gloves}}
{{CRL-generic_black_gloves}}
-
{{CRLtemplate|File:Blankwhite.gif|Chest Armor|
+
{{CRLtemplate-nolevels|File:Blankwhite.gif|Chest Armor|
-
*Armor painted with a base of matte or satin white.
+
*Armor is painted matte or satin white.
*Center of chest has a vertical blue stripe which starts below the top edge of the armor and ends short of the bottom edge.
*Center of chest has a vertical blue stripe which starts below the top edge of the armor and ends short of the bottom edge.
-
*Weathering of blue areas include heavy scuff marks and fading.
 
-
*Weathering of white areas are shades of grey.
 
*Shoulder straps are white.
*Shoulder straps are white.
*Lower portion of the chest is shaped to match the abdomen armor.
*Lower portion of the chest is shaped to match the abdomen armor.
-
*Chest and back plate should match together at the sides with no open gap.
+
*Chest and back plate match together at the sides with no open gap.
-
**There is a butted seam line present between the front and back pieces.|
+
**There is a butted seam line present between the front and back pieces.
-
*Armor must be weathered.|}}
+
*Weathering of blue areas includes various scuff marks and fading.
 +
*Weathering of white areas are shades of grey.||}}
-
{{CRLtemplate|File:Blankwhite.gif|Back Armor|
+
{{CRLtemplate-nolevels|File:Back_Armor_Phase2_Animated.jpg|Back Armor|
-
*Armor painted with a base of matte or satin white.
+
*Armor is painted matte or satin white.
*Back armor has a detail plate consisting of  4 circles and 5 horizontal bars.
*Back armor has a detail plate consisting of  4 circles and 5 horizontal bars.
-
*Weathering of white areas are shades of grey.
+
*Chest and back plate match together at the sides with no open gap.
-
*Chest and back plate should match together at the sides with no open gap.
+
**There is a butted seam line present between the front and back pieces.  
**There is a butted seam line present between the front and back pieces.  
-
*Shoulder straps are white.|
+
*Shoulder straps are white.
-
*Armor must be weathered.|}}
+
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:Blankwhite.gif|Ab Armor|
+
{{CRLtemplate-nolevels|File:Blankwhite.gif|Abdomen Armor|
-
*Armor painted with a base of matte or satin white.
+
*Armor is painted matte or satin white.
-
*Near the top of the ab piece is a short rectangular dash which tapers inward slightly as it travels downward.
+
*Near the top of the abdomen is a short rectangular dash which tapers inward slightly as it travels downward.
**When the chest and ab armor are combined, the two dash marks resemble an exclamation point.  
**When the chest and ab armor are combined, the two dash marks resemble an exclamation point.  
 +
*Top edge of the armor is squared off to match the chest armor.
 +
*The abdomen armor protrudes out in the middle to match the shape of the chest.
 +
*The abdomen armor joins at the rear and the join is covered by a center plate.
*Weathering of blue areas include heavy scuff marks and fading.
*Weathering of blue areas include heavy scuff marks and fading.
-
*Weathering of white areas are shades of grey.
+
*Weathering of white areas are shades of grey.||}}
-
*Top top section of the armor piece is shaped off to match the chest armor.
+
-
*The ab armor protrudes out in the middle to match the shape of the chest.
+
-
*The ab armor joins at the rear and the join is covered by a center plate.|
+
-
*Armor must be weathered.|}}
+
-
{{CRLtemplate|File:Blankwhite.gif|Codpiece and belt front|
+
{{CRL-TC_animated_cod}}
-
*Armor painted with a base of matte or satin white.
+
-
*If weathered, the weathering should be shades of grey.
+
-
*Belt is approx 3" tall and divided into segments. The front segments have a key/slot detail.
+
-
*Belt boxes are mounted on each side.
+
-
*Cod and Posterior armor should connect at the hips. Butted seams are permitted at this connection if required.|
+
-
*Armor must be weathered.|}}
+
-
{{CRLtemplate|File:Blankwhite.gif|Posterior Armor, belt rear and detonator|
+
{{CRLtemplate-onelevel|File:Posterior_Armor_Phase2_Animated.jpg|Posterior Armor, belt rear and Detonator|
-
*Armor painted with a base of matte or satin white.
+
*Armor is painted matte or satin white.
-
*If weathered, the weathering should be shades of grey.
+
*Belt is approx 3" tall and divided into segments.
*Belt is approx 3" tall and divided into segments.
-
*Cod and Posterior armor should connect at the hips. Butted seams are permitted at this connection if required.
+
*Cod and Posterior armor connect at the hips.
 +
**Butted seams are permitted at this connection if required.
*Detonator is centered on the back of belt with no control buttons.
*Detonator is centered on the back of belt with no control buttons.
-
**The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
+
*The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
**Lines may be recessed or painted on.
**Lines may be recessed or painted on.
-
**Center of each round detonator end cap is painted grey.|
+
*Armor is weathered with shades of grey.|
-
*Armor must be weathered.|}}
+
*Detonator lines are recessed.|}}
-
{{CRLtemplate|File:Blankwhite.gif|Thigh Armor|
+
{{CRL-TC_animated_belt_boxes}}
-
*Armor painted with a base of matte or satin white.
+
-
*Front of thigh armor should have a flat triangular area near the knee with a notch cut out for the knee armor.
+
-
*From the top of the triangle a ridge line should travel up the front of the thigh to the top.
+
-
*The upper outer edge should have an angled section.
+
-
*The rear of the thigh should have an indentation.
+
-
*Armor must be seamless.  No visible traces of how the armor was assembled should be shown.
+
-
*Weathering is shades of grey.|
+
-
*Armor must be weathered.|}}
+
-
{{CRLtemplate|File:Blankwhite.gif|Shin Armor|
+
{{CRL-TC_animated_thighs}}
-
*Armor painted with a base of matte or satin white.
+
 
 +
{{CRLtemplate-onelevel|File:Blankwhite.gif|Lower Leg Armor|
 +
*Armor is painted matte or satin white.
*Knee armor is integrated with the lower leg.
*Knee armor is integrated with the lower leg.
*The knees are painted dark grey with a narrow horizontal white band across the center. This white band rises as it crosses the face of the knee and drops back lower as the travels around the sides.
*The knees are painted dark grey with a narrow horizontal white band across the center. This white band rises as it crosses the face of the knee and drops back lower as the travels around the sides.
 +
*The front of the armor has a triangular detail just below the knee and a hard ridge line down the front of the shin.
*The front of each shin is painted blue.
*The front of each shin is painted blue.
-
*The blue color starts just below the knee section leaving a white band between the blue color and the knee piece. This blue color ends short of the lower edge, leaving a white band around the bottom of the armor piece.  
+
*The blue color starts just below the knee section leaving a white band between the blue color and the knee area. This blue color ends short of the lower edge, leaving a white ankle band around the bottom of the armor piece.  
-
*The rear of the shin should have an indentation.
+
*Back of the lower legs have an indentation just under the calf that extends down to the ankle.
-
*Outer seam of the shin must be seamless.
+
*The outside of the calf is seamless.
-
*A clam shell opening on the inner seam is acceptable.
+
**A clam shell opening on the inner seam is acceptable.
-
*Weathering of white areas are shades of grey.|
+
*Armor is weathered with shades of grey.|
-
*Armor must be weathered.|}}
+
*Armor is seamless with a trap door access through the indent in the rear of the lower leg.|}}
{{CRL-TC_animated_boots}}
{{CRL-TC_animated_boots}}

Revision as of 12:56, 19 June 2014

crlblackhd.gif
Jesse (Phase 2)
Missingprofile.jpg
Model none, Photo by none


Clone-Trooper-Detachment.png

Description: Clone Trooper Jesse (Phase 2)
Prefix: CT
Detachment: Clone Trooper Detachment
Context: Star Wars: The Clone Wars, Season 4

Jesse is respected as a well-mannered and loyal Republic trooper.


The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

  • This CRL is a work in progress.
  • This costume may be approved by GMLs, but until the library entry is complete, it is suggested that this character first be submitted to the appropriate DL/GML peer review section of the legion forum.
  • If you have this costume and would like to assist with the completion of this library entry, please contact your detachment leader.
  • Please note that the use of the word "should" below does not indicate that the armor piece is considered open to interpretation. All instances of "should be" and "should have" will be replaced with "is" and "has", as this guide is completed.
Required Costume Components

The following costume components are present and appear as described below.

Blankwhite.gif Helmet
For 501st approval:
  • Armor is painted matte or satin white.
  • A large Galactic Republic symbol covers nearly the entire front and top of the helmet dome.
  • The blue line across the top of the eye lens extends around to the back of the helmet and converges with the larger blue section on the rear quarter.
  • The helmet eye lens and nose area are outlined in blue with the lines converging to a point over the lower chin area.
  • The rectangle ear caps are painted grey.
  • 6 vents on each side of helmet.
    • Vents may be painted black or grey, or cut out and filled with black mesh.
  • The rear of the helmet has an indented band that is filled with a slightly darker shade of blue than what is on the front of the helmet.
  • Each rear quarter of the helmet, from the backside of the earpieces to the center rear section, is painted blue, including all four walls of the indented section.
  • The center round cap, on the rear of the helmet, is painted grey.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.



TC animated neckseal.jpg Neck Seal
For 501st approval:
  • Neck seal is black in color with no ribbing.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.
For level two certification (if applicable):
  • Neck seal closes in the front via 2 small black snaps.


TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


Dogma Shoulders.jpg Shoulder Armor
For 501st approval:
  • Armor painted matte or satin white.
  • Shoulders have wide, vertical, center blue stripe.
  • Shoulders have all rounded edges.
  • Shoulder armor is not symmetrical.
    • The shoulders slightly curve back at the bottom.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.


Dogma Biceps.jpg Upper Arm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Each bicep has a blue vertical stripe down the center which is aligned with the shoulder armor.
  • Armor is cylindrical with no rear indent.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.


Dogma Forearms.jpg Forearm Armor
For 501st approval:
  • Armor painted matte or satin white.
  • Front of each forearm has a blue stripe.
  • Right forearm has a compad with 6 raised buttons, with a larger rectangle above them. A smaller raised section is closest to the elbow.
  • Armor is seamless on the outside edge.
    • Due to the shape of the armor, a butted seam is acceptable on the inside if required.
  • Elbow plate is integrated into the forearm armor.
  • Elbow section has a center blue stripe.
    • Stripes on front of forearm and elbow pieces do not align.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.
For level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.


TC animated handplates.jpg Hand Plates
For 501st approval:
  • Armor is painted matte or satin white.
  • Hand plates are mirror images of each other.
  • Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
  • Armor is weathered with shades of grey.



Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.


Blankwhite.gif Chest Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Center of chest has a vertical blue stripe which starts below the top edge of the armor and ends short of the bottom edge.
  • Shoulder straps are white.
  • Lower portion of the chest is shaped to match the abdomen armor.
  • Chest and back plate match together at the sides with no open gap.
    • There is a butted seam line present between the front and back pieces.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.


Back Armor Phase2 Animated.jpg Back Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Back armor has a detail plate consisting of 4 circles and 5 horizontal bars.
  • Chest and back plate match together at the sides with no open gap.
    • There is a butted seam line present between the front and back pieces.
  • Shoulder straps are white.
  • Armor is weathered with shades of grey.


Blankwhite.gif Abdomen Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Near the top of the abdomen is a short rectangular dash which tapers inward slightly as it travels downward.
    • When the chest and ab armor are combined, the two dash marks resemble an exclamation point.
  • Top edge of the armor is squared off to match the chest armor.
  • The abdomen armor protrudes out in the middle to match the shape of the chest.
  • The abdomen armor joins at the rear and the join is covered by a center plate.
  • Weathering of blue areas include heavy scuff marks and fading.
  • Weathering of white areas are shades of grey.



TC animated cod.jpg Codpiece and Belt front
For 501st approval:
  • Armor is painted matte or satin white.
  • Belt is approx 3" tall and divided into 1.75" wide segments.
  • The front segments have a key/slot detail.
  • Belt boxes are mounted at the hips.
  • Codpiece and Posterior armor connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Armor is weathered with shades of grey.


Posterior Armor Phase2 Animated.jpg Posterior Armor, belt rear and Detonator
For 501st approval:
  • Armor is painted matte or satin white.
  • Belt is approx 3" tall and divided into segments.
  • Cod and Posterior armor connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Detonator is centered on the back of belt with no control buttons.
  • The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
    • Lines may be recessed or painted on.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Detonator lines are recessed.


TC animated belt box.jpg Belt Boxes
For 501st approval:
  • Two rectangular boxes with one mounted on each side of belt.
  • Boxes are painted matte or satin white.
    • The top side of the box is tapered outward.
    • There is an inset detail near the top of each box.
  • Armor is weathered with shades of grey.



TC animated thighs.jpg Thigh Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
  • From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
  • The upper outer edge has an angled section.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
Blankwhite.gif Lower Leg Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Knee armor is integrated with the lower leg.
  • The knees are painted dark grey with a narrow horizontal white band across the center. This white band rises as it crosses the face of the knee and drops back lower as the travels around the sides.
  • The front of the armor has a triangular detail just below the knee and a hard ridge line down the front of the shin.
  • The front of each shin is painted blue.
  • The blue color starts just below the knee section leaving a white band between the blue color and the knee area. This blue color ends short of the lower edge, leaving a white ankle band around the bottom of the armor piece.
  • Back of the lower legs have an indentation just under the calf that extends down to the ankle.
  • The outside of the calf is seamless.
    • A clam shell opening on the inner seam is acceptable.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Armor is seamless with a trap door access through the indent in the rear of the lower leg.


TC animated boots.jpg Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
  • Boots are lace-less and have flat soles.
  • Boots have a center strip running from the toe to the ankle.
  • A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.
For level two certification (if applicable):
  • Boots have accurate notched sole.
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.


CRLdc15s-animated.jpg DC-15S Blaster Carbine (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.

  • This is the animated variant of the DC-15S blaster rifle.


This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:CT_-_Jesse_phase_2

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.