Revision as of 12:10, 16 June 2014 by TK826 (Talk | contribs)
crlblackhd.gif
Sergeant Dogma (Phase 2)
Dogma.jpg
Model CT 9512 , Photo by Joey K.


Clone-Trooper-Detachment.png

Description: Sergeant Dogma (Phase 2)
Prefix: CT
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Season 4

Dogma carries the rank of Platoon Sergeant in the elite Torrent Company of the Grand Army of the Republic. Dogma is widely recognized as an extremely loyal soldier who never questions or disobeys orders.


The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

  • This CRL is a work in progress.
  • As such, this costume must be approved by the Legion Membership Officer, via the appropriate section of the Legion forum.
  • If you have this costume and would like to assist with the completion of this library entry, please contact your detachment leader.
  • Please note that the use of the word "should" below does not indicate that the armor piece is considered open to interpretation. All instances of "should be" and "should have" will be replaced with "is" and "has", as this guide is completed.

Required Costume Components

The following costume components are present and appear as described below.

Blankwhite.gif Helmet
For 501st approval:
  • Helmet painted matte white.
  • A large blue, downward pointing, "arrow head" design covers the center of the helmet face and front of dome.
  • Front center of dome has a smaller red, downward pointing, triangle.
  • Frown is painted grey.
  • Chin vocoder is painted grey.
  • Ear caps are grey.
  • 6 Vents on each side of helmet.
    • Vents may be painted black or grey, or cut out and filled with black mesh.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.



TC animated neckseal.jpg Neck Seal
For 501st approval:
  • Neck seal is black in color with no ribbing.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.
For level two certification (if applicable):
  • Neck seal closes in the front via 2 small black snaps.


TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


Blankwhite.gif Shoulder Armor
For 501st approval:
  • Armor painted matte or satin white.
  • Shoulders have wide, vertical, center blue stripe.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.


Blankwhite.gif Upper Arm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Outside of piece has a blue stripe which aligns with shoulder armor.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.


Blankwhite.gif Forearm Armor
For 501st approval:
  • Armor painted matte or satin white.
  • Front of forearm has a blue stripe.
  • Right forearm has a compad with 6 raised buttons, with a larger rectangle above them.
    • A smaller raised section is closest to the elbow.
  • Armor is seamless on the outside edge.
    • Due to the shape of the armor, a butted seam is acceptable on the inside if required.
  • Elbow plate is integrated into the forearm armor.
  • Elbow section has a center blue stripe.
    • Stripes on front of forearm and elbow pieces do not align.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.
For level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.


Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.


Blankwhite.gif Hand Plates
For 501st approval:
  • Armor is painted matte or satin white.
  • Center of hand plate has a blue stripe.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.


Dogma Chest.jpg Chest Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Center of chest armor has a large blue, downward pointing, "arrow head" design matching that of the helmet face.
  • Shoulder straps are blue.
  • Lower portion of the chest has a squared notch for the abdomen armor to fit into.
  • Chest and back plate match together at the sides with no open gap.
    • Butted seam lines are permitted if required.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.


Blankwhite.gif Back Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Top middle section of the back armor is painted blue and extends down to the top of the protruding back section.
  • Back armor has a detail plate consisting of 4 circles and 5 horizontal bars.
  • Chest and back plate match together at the sides with no open gap.
    • Butted seam lines are permitted if required.
  • Shoulder straps are blue.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.


Blankwhite.gif Abdomen Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Top edge of the armor is squared off to match the chest armor.
  • The abdomen armor protrudes out in the middle to match the shape of the chest armor.
  • The abdomen armor joins at the rear and the join is covered by a center plate.
  • Armor is weathered with shades of grey.


Blankwhite.gif Codpiece and belt front
For 501st approval:
  • Armor is painted matte or satin white.
  • Belt is approx 3" tall and divided into segments. The front segments have a key/slot detail.
  • Belt boxes are mounted on each side.
  • Cod and Posterior armor are connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Armor is weathered with shades of grey.


Blankwhite.gif Posterior Armor, belt rear and detonator
For 501st approval:
  • Armor is painted matte or satin white.
  • Belt is approx 3" tall and divided into segments.
  • Cod and Posterior armor should connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Detonator is centered on the back of belt with no control buttons.
  • The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
    • Lines may be recessed or painted on.
  • Center of each round end cap is painted grey.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Detonator lines are recessed
Blankwhite.gif Thigh Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
    • This triangle section is painted blue.
  • From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
  • The upper outer edge has an angled section.
  • The rear of the thigh has an indentation.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.


Blankwhite.gif Lower Leg Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Knee armor is integrated with the lower leg.
    • Center of knee section is painted blue.
  • Front center of armor is painted with a blue elongated hexagonal design.
  • The rear of the should have an indentation.
  • Outer edge of the of armor is seamless.
    • A clam shell opening on the inner leg is acceptable.
  • Weathering of blue areas includes various scuff marks and fading.
  • Weathering of white areas are shades of grey.



TC animated boots.jpg Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
  • Boots are lace-less and have flat soles.
  • Boots have a center strip running from the toe to the ankle.
  • A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.
For level two certification (if applicable):
  • Boots have accurate notched sole.
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.


CRLdc15s-animated.jpg DC-15S Blaster Carbine (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.

  • This is the animated variant of the DC-15S blaster rifle.


This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:CT_-_Dogma_phase_2

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.