501st Legion: Vader's Fist

(Difference between revisions)

Latest revision as of 04:10, 1 March 2012

Clone Commander Gree

Model MODEL NAME, Photo by PHOTOGRAPHER NAME

Description: Clone Trooper
Prefix: CC
Detachment: Clone Trooper Detachment
Context: Episode III: Revenge of the Sith
CC-1004 was a senior clone commander in the Grand Army of the Republic. He possessed of a keen interest in alien species and cultures, 1004 was singled out to participate in a special training program by ARC trooper Alpha-17 that encouraged individuality. As a token of his independence, 1004 was rewarded with a name and chose to be known as "Gree," a reference to an obscure alien species that he found particularly interesting.

The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: Effective June 1 2012, the 501st will no longer be approving realistic interpretations of Clone Wars CG characters. The armor sculpt must match the character being recreated. See this thread at clonetroopers.net for the differences between the sculpts.

This CRL is a work in progress. This costume may be approved by GMLs, but additional research should be done until the CRL is complete.
If you have this costume and would like to assist with this CRL, please contact your detachment leader!
Please note that the use of the word "should" below does not indicate that a requirement is optional. All instances of should will be replaced with must as this guide is completed.

Required Costume Components
The following costume components must be present and appear as described below for approval .

	Helmet For 501st approval: Episode 3 style Clone Helmet - Fanmade bucket. Some "name brand" helmets may be unacceptable. Visor - Green Mirrored Visor. Helmet mohawk on dome. Vertical kill stripes on each side of helmet between the ears and rear V and are hunter green. Helmet frown is charcoal grey in color. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown. Primer gray stripe around back of dome. Ear caps are painted a dark grey. Face and Nose and dome are chrome. A Green command stripe is painted on the face and dome. The dome is a circular based stripe. The green stripe should be cammo'd in some way. The mohawk, ears, and rear V portions a white. The indents are cammo. The tubing around the helmet are a pale blue/gray.
	For level two certification (if applicable): Helmet has the appearance of a neck ring.
	For level three certification (if applicable): Helmet has an enclosed complete neck ring that seals the helmet to the neck.

	Neck Seal For 501st approval: Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.
	For level two certification (if applicable):
	For level three certification (if applicable):

	Under Suit For 501st approval: Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.
	For level two certification (if applicable):
	For level three certification (if applicable):

	Shoulder Bells For 501st approval: Armor should be painted chrome. Shoulders have a chrome outer ring with weathered cammoded center. Each shoulder bell has a different weathering pattern. Shoulders should be tear drop in shape with all rounded edges.
	For level two certification (if applicable):
	For level three certification (if applicable): Shoulder bells should not be symmetrical. The Shoulder bells should slightly curve back at the bottom of the shoulder.

	Upper Arm Armor For 501st approval: Armor should be painted chrome. Biceps have a chrome outer ring with weathered cammoded center. Tricep indents are all chrome. The cammo pattern and scratches are distinct to each arm. Should have a dimple on the lower area of the back of the arm. The outside of the bicep should have a hard line edge at the front that turns in. The inside of the upper arm should be rounded.
	For level two certification (if applicable):
	For level three certification (if applicable): Armor should be seamless. No visible traces of how the armor was assembled should be shown.

	Elbow Armor For 501st approval: Armor should be painted matte or satin black, with hosta leaf green and hunter green cammo pattern on top. There are two elbows. On each elbow on the outside of the body near the connection point of the elbow strap there should be detail slots that look like an equal symbol on both elbow pieces. Both elbows have strapping. The straps should have a raised detail line at the top and bottom of the strap The straps should be black.
	For level two certification (if applicable):
	For level three certification (if applicable): Elbows should be mirror images of each other with a notched area on the outside of the elbow above the detail marks.

	Forearm Armor For 501st approval: Armor should be painted in a cammo pattern that uses lighter greens than that of the suit. Both left and right forearms should be mirror images of each other. Right forearm should have a compad that has 8 small buttons,1 Large main button, and 1 slightly smaller rectanular button. Forearm tops should have a flattened triangular area that have a ridge that comes to a point at the top of the forearm.
	For level two certification (if applicable):
	For level three certification (if applicable): Compad has detail antenna on its left. Instead of a hard edge the top of the forearm has a bone ridge. Armor should be seamless. No visible traces of how the armor was assembled should be shown.

	Hand Plates For 501st approval: Armor should be painted in a cammo pattern that uses lighter greens than that of the suit. Hand plates are mirror images of each other. Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand.
	For level two certification (if applicable):
	For level three certification (if applicable):

	Gloves For 501st approval: Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin.
	For level two certification (if applicable):
	For level three certification (if applicable):

	Chest Armor For 501st approval: Armor should be painted matte or satin black. Hosta leaf green should be shadowed all over the armor. A command stripe that start top center of the chest and flairs out the meet the lower part of the chest. The end of the stripe rides the lower ridge to a point. There are scratches that show chrome paint. The left side of the left peck is chrome and weathered in. Gree does not have two detail slots on his chest. Chest and back plate should match together at the sides with no gap, just a seam line. Shoulder straps should be placed underneath the chest to connect to the back.
	For level two certification (if applicable):
	For level three certification (if applicable): Shoulder straps should be slotted into the chest into the detail ridges of the top connection points.

	Suspenders For 501st approval: 2 Gray suspenders, one from each shoulder shoud connect to the belt. The first and last belt boxes are the connecting points. On the right side suspender a metal chevron or tab should be placed. Over the shoulders, a larger pad should be placed.
	For level two certification (if applicable):
	For level three certification (if applicable):

	Back Armor For 501st approval: Armor should be painted matte or satin black. No back plate detail is required because it is covered by the Radio Pack. Chest and back plate should match together at the sides with no gap, just a seam line. Shoulder straps should be placed underneath the chest to connect to the back. One thermal detonator should be centered on lower back. Keys face to the left.
	For level two certification (if applicable):
	For level three certification (if applicable): Shoulder straps should be slotted into the Back into the detail ridges of the top connection points.

	Radio Pack For 501st approval: Radio should be painted matte or satin black. Hosta Leaf geen cammo pattern should cover the radio pack. Radio has 3 knobs, dials, or lights on the bottom right corner. Radio has an antenna that comes out the top with a blue diode on it. Radio has a static bar that comes out the face, bends back in at two 90 degree angles and mounts to the side of the radio. Radio mounts to the top of the tank and had two return boxes on each side of the radio.
	For level two certification (if applicable):
	For level three certification (if applicable): There should be an small curl knob near the antenna port. Top returns of the radio should have speaker details.

	Ab Armor For 501st approval: Armor should be painted matte or satin black. Hosta leaf green cammo should be applied to the entire mid section Four 1/4" diameter holes per side on indents of ab plate, eight holes total. Ab section should wrap around the wearers body and be sealed at the sides or at the back. Ab section should be completely contained under the chest and back armor.
	For level two certification (if applicable):
	For level three certification (if applicable): Ab section should be seamless at the sides and close in the back. A detail plate should cover the seam line and hide all work.

	Cod and Posterior Armor For 501st approval: Armor should be painted in a cammo pattern. Hips should have silver accents. Cod and Posterior armor should connect at the hips.
	For level two certification (if applicable):
	For level three certification (if applicable): Hips should be connected via a snap with the correct detailed shape of the armor at the connection point.

	Belt For 501st approval: Armor should be painted matte or satin black. Green cammo paint should be matted all over the belt. Ammo Belt with boxes and detonator. Detonator is centered on the back of belt. 8 boxes total, 4 on each side of abdomen and attached to the belt. Suspenders should connect to the belt boxes
	For level two certification (if applicable):
	For level three certification (if applicable): Front and rear belt boxes have a key hole slot for suspenders to attach into. Belt Boxes should be notched and fitted flush with the details of the belt. Left Rear belt box should have two square buttons in the top left corner and and equal symbol detail at the bottom right. Right Rear belt box should have a bar with two small cylinders centered with and equal symbol detail on the bottom left. From the rear two belt boxes the belt should have a ribbed detailed appearance.

	Thigh Armor For 501st approval: Armor should be painted in a cammo pattern. Each leg has its own distinctive pattern. Front of thigh armor should have a flat triangular area near the knee. From the top of the triangle a ridge line should go up the front of the thigh to the top. Rear of the thigh should have an indention. Left thigh has a pouch that is held in place via a 2 inch gray strap
	For level two certification (if applicable):
	For level three certification (if applicable): Outside of lower portion of the thighs should come to a point and inner lower end should be rounded. Gray leg strap should be made of leather. Leg pouch has the correct shape and may be functional. Armor should be seamless. No visible traces of how the armor was assembled should be shown.

	Knee Armor For 501st approval: Armor should be painted in a cammo pattern. Each knee has a distinctive pattern. Knees should wrap around the front of the leg. From top center a raised detail line should be present. Knees should be strapped to the leg via a black or dark gray strap with a raised center area that wraps around the leg and connects on both sides of the Knee.
	For level two certification (if applicable):
	For level three certification (if applicable): Center strap should be primer gray. Connection between the knee and the strapping should have a detail clip.

	Lower Leg Armor For 501st approval: Armor should be painted gloss black. Lower Legs are mirror images of each other. The front of the armor should have a triangular detail at the top of the leg and a hard ridge line down the front of the shin. Back of the lower legs should have an indentation just under the calf the follow down to the ankle. Calf can have an access area on the inside of the leg. The outside of the calf should be closed.
	For level two certification (if applicable):
	For level three certification (if applicable): Calves should be seamless and have a trap door access through the indent in the rear of the lower leg.

	Boots For 501st approval: Black, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor. Boots must be lace-less and have flat soles. The boots have armor detail to include a natural seam at the toe and a gray strap that goes over the top of the foot with two protruding disks at each side of the strap. There should be no markings or labels from the shoe makers. Boot soles should be primer gray.
	For level two certification (if applicable):
	For level three certification (if applicable):

Optional Accessories
Items below are optional costume accessories. These items are not required for approval, but if present must meet the guidelines below.

	DC-15S Blaster Carbine For 501st approval:
	For level two certification (if applicable):
	For level three certification (if applicable):

	DC-15A Blaster Rifle For 501st approval:
	For level two certification (if applicable):
	For level three certification (if applicable):

	Micro Binoculars Hand Set For 501st approval:
	For level two certification (if applicable):
	For level three certification (if applicable):

	Emperor Palpatine Holodisk Communicator For 501st approval:
	For level two certification (if applicable):
	For level three certification (if applicable):

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:CC_CommanderGree

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.

Retrieved from "http://www.501st.com/databank/Costuming:CC_CommanderGree"

Latest revision as of 04:10, 1 March 2012

NAVIGATION

Operations Docs

Membership

Personal tools

Search

Toolbox