Revision as of 12:06, 8 April 2011 by Torment (Talk | contribs)
crlblackhd.gif
Clone Commander Bly
500px
Model MODEL NAME, Photo by PHOTOGRAPHER NAME


Clone-Trooper-Detachment.png

Description: Clone Commander Bly
Prefix: CC
Detachment: Clone Trooper Detachment
Context: Episode III: Revenge of the Sith
Bred on Kamino, CC-5052 was among the first generation of clone marshal commanders to be trained by the Advanced Recon Commando Alpha-17, who gave him the designation "Bly." A clone of Jango Fett, Bly was trained as an Advanced Recon Commando himself, giving him a more independent mindset and allowing him to think "outside the manual" when it came to the shifting of tactical situations. As a clone commander, it was Bly's job to act as an intermediary between the Jedi Generals and the regular clone troopers, although he was bred to be loyal to the Republic above all others. Bly was assigned to the 327th Star Corps, which fell under the command of Aylaa Secura.


Template:CRLwipapproval

Costume Components
150px Helmet
For 501st approval:
  • Episode 3 style Clone Helmet - Fanmade bucket. Some "name brand" helmets may be unacceptable.
  • Visor - Black Visor.
  • Helmet mohawk on dome.
  • Vertical kill stripes on each side of helmet cheeks that are dark blue in color.
  • Helmet frown is charcoal grey in color. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
  • Primer grey stripe around back of dome.
  • Ear caps are painted a dark grey.
    • Face, ears, and dome are white. Mohawk and remainder of the helmet are mustard yellow. There is a sandy brown stripe down the center of the helmet that ends at the nose of the helmet and squares off at the rear of the helmet.
  • Binoc set mounted to the helmet.
For level two certification (if applicable):
  • Helmet has the appearance of a neck ring.
For level three certification (if applicable):
  • Helmet has an enclosed complete neck ring that seals the helmet to the neck.
  • Binoc set mounted to the helmet and the binocs can move up and down.
150px Neck Seal
For 501st approval:
  • Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.
For level two certification (if applicable):
For level three certification (if applicable):
TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.
For level two certification (if applicable):
For level three certification (if applicable):
150px Shoulder Bells
For 501st approval:
  • Armor should be painted matte or satin white.
    • Sandy Brown command stripe. Front part of the stripe is painted like any other command stripe. The rear part of the stripe should be placed in the center of the bell. This is a forward facing stripe.
  • Shoulders should be tear drop in shape with all rounded edges.
For level two certification (if applicable):
For level three certification (if applicable):
  • Shoulder bells should not be symmetrical. The Shoulder bells should slightly curve back at the bottom of the shoulder.
150px Upper Arm Armor
For 501st approval:
  • Armor should be painted matte or satin white.
    • Sandy brown stripe starts on the hard outside edge of the bicep and goes to the middle of the outside bicep. It is not the same as the EII command stripes.
  • 3 smaller white ammo boxes are attached to the right bicep on a brown strap.
  • Should have a dimple on the lower area of the back of the arm. The outside of the bicep should have a hard line edge at the front that turns in. The inside of the upper arm should be rounded.
For level two certification (if applicable):
For level three certification (if applicable):
  • Armor should be seamless. No visible traces of how the armor was assembled should be shown.
150px Elbow Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • There are two elbows. On each elbow on the outside of the body near the connection point of the elbow strap there should be detail slots that look like an equal symbol on both elbow pieces.
  • Both elbows have strapping. The straps should have a raised detail line at the top and bottom of the strap.
For level two certification (if applicable):
For level three certification (if applicable):
  • Elbows should be mirror images of each other with a notched area on the outside of the elbow above the detail marks.
150px Forearm Armor
For 501st approval:
  • Armor should be painted matte or satin white.
    • Two inch sandy brown stripe on the top part of the forearm. On the right arm it would cover over the compad. The com pad should be left white. This design should be matched on the left forearm. Acceptable options for the left arm would be to either add a second compad, in paint, leave an outline of a compad, or leave just the stripe.
  • Both left and right forearms should be mirror images of each other.
  • Right forearm should have a compad that has 8 small buttons,1 Large main button, and 1 slightly smaller rectangular button.
  • Forearm tops should have a flattened triangular area that have a ridge that comes to a point at the top of the forearm.
For level two certification (if applicable):
  • Compad has detail antenna on its left.
For level three certification (if applicable):
  • A second compad on the left forearm or a painted outline of a compad on the left forearm is acceptable
  • Instead of a hard edge the top of the forearm has a bone ridge.
  • Armor should be seamless. No visible traces of how the armor was assembled should be shown.
150px Hand Plates
For 501st approval:
  • Armor should be painted matte or satin white.
    • 2 inch sandy brown running center of the hand plate.
  • Hand plates are mirror images of each other.
  • Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand.
For level two certification (if applicable):
For level three certification (if applicable):
150px Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin.
For level two certification (if applicable):
For level three certification (if applicable):
150px Command Pauldron
For 501st approval:
  • Pauldron should be Episode III style. The mantle over the left shoulder should be colored in the command orange. Right shoulder mantle should be all black. As well, the paneling on the remainder of the pauldron should be black too. On the right side of the Pauldron, a ammo belt is strung down to the belt.
For level two certification (if applicable):
For level three certification (if applicable):
150px Chest Ammo Belt
For 501st approval:
  • 3 white ammo boxes and one grey clip greeblie attached to a brown strap on right side of chest.
For level two certification (if applicable):
For level three certification (if applicable):
150px Chest Armor
For 501st approval:
  • Armor should be painted matte or satin white.
    • Sandy Brown command stripe approximately 2 inches wide marked center vertical from neck to upper return curve.
  • Two detail slots on right breast.
  • Chest and back plate should match together at the sides with no gap, just a seam line.
  • Shoulder straps should be placed underneath the chest to connect to the back.
For level two certification (if applicable):

For level three certification (if applicable):
  • Shoulder straps should be slotted into the chest into the detail ridges of the top connection points.
150px Back Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Rear tank has detailed area that contains 4 circles. Under the circles at the left side of the back there should be two parallel lines and the the right of the back there should a be a squared detail.
  • Chest and back plate should match together at the sides with no gap, just a seam line.
  • Shoulder straps should be placed underneath the chest to connect to the back.
For level two certification (if applicable):

For level three certification (if applicable):
  • Shoulder straps should be slotted into the Back into the detail ridges of the top connection points.
  • Highly detailed resin insert should replace softer details.
150px Ab Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Four 1/4" diameter holes per side on indents of ab plate, eight holes total.
  • Ab section should wrap around the wearers body and be sealed at the sides or at the back.
  • Ab section should be completely contained under the chest and back armor.
For level two certification (if applicable):

For level three certification (if applicable):
  • Ab section should be seamless at the sides and close in the back. A detail plate should cover the seam line and hide all work.
150px Cod and Posterior Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Cod and Posterior armor should connect at the hips.
For level two certification (if applicable):
  • Hips should be connected together via a snap or screw.
For level three certification (if applicable):
  • Hips should be connected via a snap with the correct detailed shape of the armor at the connection point.
150px Belt
For 501st approval:
  • Armor should be painted matte or satin white.
    • The front of the belt and front two belt boxes should be painted mustard yellow.
  • Ammo Belt with boxes and detonator.
  • Detonator is centered on the back of belt.
  • 8 boxes total, 4 on each side of abdomen and attached to the belt.
For level two certification (if applicable):

For level three certification (if applicable):
  • Belt Boxes should be notched and fitted flush with the details of the belt.
  • Left Rear belt box should have two square buttons in the top left corner and and equal symbol detail at the bottom right.
  • Right Rear belt box should have a bar with two small cylinders centered with and equal symbol detail on the bottom left.
  • From the rear two belt boxes the belt should have a ribbed detailed appearance.
150px Kama
For 501st approval:
  • Kama should be kakki or tea brown color. The Kama should not be lined with matching color fabric The rear of the Kama has a split that denotes it as a two piece . Kama should start at the front belt boxes. Kama should be from a heavy material like canvas or a tight weave burlap. Kama should flow to the bottom of your knee armor. There are two straps from the kama that connect to a command buckle centered to the front of the belt.
For level two certification (if applicable):
For level three certification (if applicable):
150px Thigh Armor
For 501st approval:
  • Thighs are painted mustard yellow. Starting at the leg triangles and moving vertically up a sandy brown stripe should be painted.
  • Front of thigh armor should have a flat triangular area near the knee. From the top of the triangle a ridge line should go up the front of the thigh to the top.
  • Rear of the thigh should have an indention.
For level two certification (if applicable):

For level three certification (if applicable):
  • Outside of lower portion of the thighs should come to a point and inner lower end should be rounded.
  • Armor should be seamless. No visible traces of how the armor was assembled should be shown.
150px Knee Armor
For 501st approval:
  • Armor should be painted matte or satin white.
    • Knees should have a sandy brown stripe that starts at the top and runs vertically down to the bottom of the knee.
  • Knees should wrap around the front of the leg. From top center a raised detail line should be present.
  • Knees should be strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.
For level two certification (if applicable):

For level three certification (if applicable):
  • Center strap should be primer gray.
  • Connection between the knee and the strapping should have a detail clip.
150px Lower Leg Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Lower Legs are mirror images of each other. The front of the armor should have a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
  • Back of the lower legs should have an indentation just under the calf the follow down to the ankle.
  • Calf can have an access area on the inside of the leg. The outside of the calf should be closed.
For level two certification (if applicable):

For level three certification (if applicable):
  • Calves should be seamless and have a trap door access through the indent in the rear of the lower leg.
150px Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor. Boots must be lace-less and have flat soles. The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap. This stap should be painted sandy brown. Accross the shoe just infront of detail strap another thin stripe painted sandy brown should also be placed on the boot. There should be no markings or labels from the shoe makers. The shoe soles should be gray.
For level two certification (if applicable):
For level three certification (if applicable):
Costume Accessories:
150px DC-15 Long Rifle
For 501st approval:

For level two certification (if applicable):
For level three certification (if applicable):
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.