(Difference between revisions)
 
(19 intermediate revisions not shown)
Line 1: Line 1:
-
{{CRLheader|Clone Commander Bly|File:Commander Bly front and back copy.jpg|CC-9927|Thomas J Twohig II}}
+
{{CRLheader|Commander Bly|File:Commander Bly front and back copy.jpg|CC 9927|Thomas J Twohig II}}
-
{{CRLdetinfo| 1111 |Clone Commander Bly|CC|Episode III: Revenge of the Sith|
+
{{CRLdetinfo| 1111 |Commander Bly|CC|Episode III: Revenge of the Sith|
-
Bred  on Kamino, CC-5052 was among the first generation of clone marshal commanders to be trained by the Advanced Recon Commando Alpha-17, who gave him the designation "Bly."  A clone of Jango Fett, Bly was trained as an Advanced Recon Commando himself, giving him a more independent mindset and allowing him to think "outside the manual" when it came to the shifting of tactical situations. As a clone commander, it was Bly's job to act as an intermediary between the Jedi Generals and the regular clone troopers, although he was bred to be loyal to the Republic above all others. Bly was assigned to the 327th Star Corps, which fell under the command of Aylaa Secura. }}
+
 
 +
Commander Bly is among the first generation of clone marshal commanders to be trained by the Advanced Recon Commando "Alpha-17". Bly, having also been trained as an Advanced Recon Commando, has a more independent mindset, allowing the commander to think "outside the manual" when it comes to the shifting of tactical situations. As a commander, it is Bly's job to act as an intermediary between the Jedi Generals and the regular clone troopers. Bly is assigned to the 327th Star Corps, under the command of Aylaa Secura.}}
{{CRLctnlevels}}
{{CRLctnlevels}}
-
{{CRLwipgmlapproval}}
+
{{CRLgmlapproval}}
{{CRLrequirements}}
{{CRLrequirements}}
{{CRLtemplate|File:Commander Bly helmet5.jpg| Helmet|
{{CRLtemplate|File:Commander Bly helmet5.jpg| Helmet|
-
*Episode 3 style Clone Helmet - Fanmade bucket. Some "name brand" helmets may be unacceptable.
+
*Phase II style Helmet.
-
*Visor - Black Visor.
+
*Helmet mohawk on dome is painted a mustard yellow color.
-
*Helmet mohawk on dome.
+
*There is a sandy brown stripe down the center of the helmet that ends at the nose area and squares off at the rear of the helmet.
-
*Vertical kill stripes on each side of helmet cheeks that are dark blue in color.
+
*Black eye lens.
-
*Helmet frown is charcoal grey in color. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
+
*Macro-binoculars are mounted to the helmet.
-
*Primer grey stripe around back of dome.
+
*Helmet frown is charcoal grey in color.
 +
**Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
*Ear caps are painted a dark grey.
*Ear caps are painted a dark grey.
-
**Face, ears, and dome are white.  Mohawk and remainder of the helmet are mustard yellow. There is a sandy brown stripe down the center of the helmet that ends at the nose of the helmet and squares off at the rear of the helmet.
+
*Dark blue, vertical hash marks on each side of helmet cheeks.
-
*Binoc set mounted to the helmet.|
+
*Primer grey stripe around back of dome.
-
*Helmet has the appearance of a neck ring. |
+
*Armor is weathered with shades of grey.|
 +
*Helmet has the appearance of a neck ring.|
*Helmet has an enclosed complete neck ring that seals the helmet to the neck.  
*Helmet has an enclosed complete neck ring that seals the helmet to the neck.  
-
*Binoc set mounted to the helmet and the binocs can move up and down. }}
+
*Macro-binoculars are able to move up and down.}}
-
{{CRLtemplate|File:Clone trooper neck seal.jpg|Neck Seal|
+
{{CRL-realistic-clone-neckseal}}
-
*Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.| |}}
+
-
{{CRLtemplate|File:TK_anh_stunt_undersuit.jpeg|Under Suit|
+
{{CRL-generic-undersuit}}
-
* Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.| | }}
+
-
{{CRLtemplate|File:Commander Bly Shoulder armor copy.jpg|Shoulder Bells|
+
{{CRLtemplate-nolevels|File:327th pauldron.jpg|Pauldron|
-
*Armor should be painted matte or satin white.
+
*Pauldron is Episode III style.
-
*Sandy Brown command stripe. Front part of the stripe is painted like any other command stripe. The rear part of the stripe should be placed in the center of the bell. This is a forward facing stripe.
+
*The mantle over the left shoulder is colored burnt sienna.
-
*Shoulders should be tear drop in shape with all rounded edges. | |
+
*Right shoulder mantle is all black.
-
*Shoulder bells should not be symmetrical.  The Shoulder bells should slightly curve back at the bottom of the shoulder. }}
+
*The paneling on the remainder of the pauldron is black.  
 +
*A ammo belt is strung on the right side of the Pauldron.||}}
-
{{CRLtemplate|File:Commander Bly bicep armor copy.jpg|Upper Arm Armor|
+
{{CRLtemplate-nolevels|File:Commander Bly Shoulder armor copy.jpg|Shoulder Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Sandy brown stripe starts on the hard outside edge of the bicep and goes to the middle of the outside bicep. It is not the same as the EII command stripes.
+
*Sandy Brown command stripe.
-
*3 smaller white ammo boxes are attached to the right bicep on a grey strap.
+
**This is a forward facing stripe.
-
*Should have a dimple on the lower area of the back of the arm. The outside of the bicep should have a hard line edge at the front that turns in. The inside of the upper arm should be rounded. | |
+
**Front part of the stripe is painted like any other command stripe.
-
*Armor should be seamless.  No visible traces of how the armor was assembled should be shown.}}
+
**Rear part of stripe is placed in the center of the shoulder.
 +
*Shoulders are tear drop in shape with all rounded edges.
 +
*Shoulders are symmetrical.
 +
**The armor slightly curves back at the bottom of the shoulder.
 +
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:327th elbow armor.jpg|Elbow Armor|  
+
{{CRLtemplate-nolevels|File:Commander Bly bicep armor copy.jpg|Upper Arm Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*There are two elbows. On each elbow on the outside of the body near the connection point of the elbow strap there should be detail slots that look like an equal symbol on both elbow pieces.
+
*Sandy brown stripe starts on the hard outside edge of the bicep and extends to the middle of the outside bicep.
-
* Both elbows have strapping. The straps should have a raised detail line at the top and bottom of the strap.| |
+
**Stripe is not the same as the Ep.II command stripes.
-
*Elbows should be mirror images of each other with a notched area on the outside of the elbow above the detail marks.}}
+
*(2) smaller white ammo boxes are attached to the right bicep on a grey strap.
 +
**One ammo box is attached to the front, and one is attached to the outside panel of the bicep.
 +
*A dimple on the lower area of the back of the arm.
 +
*The outside of the arm has a hard line edge at the front that turns in.
 +
**The inside of the upper arm is rounded.
 +
*Armor is seamless.
 +
**No visible traces of how the armor was assembled are shown.
 +
*Armor is weathered with shades of grey.||}}
 +
 
 +
{{Elbow_Armor_Realistic}}
{{CRLtemplate|File:Commander Bly forarms copy.jpg|Forearm Armor|
{{CRLtemplate|File:Commander Bly forarms copy.jpg|Forearm Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Two inch sandy brown stripe on the top part of the forearm. On the right arm it would cover over the compad. The com pad should be left white. This design should be matched on the left forearm. Acceptable options for the left arm would be to either add a second compad, in paint, leave an outline of a compad, or leave just the stripe.  
+
*A two inch sandy brown stripe on the top part of the forearm.
-
*Both left and right forearms should be mirror images of each other.
+
**On the right arm it would cover over the compad.
-
*Right forearm should have a compad that has 8 small buttons,1 Large main button, and 1 slightly smaller rectangular button.
+
**Compad remains white.
-
*Forearm tops should have a flattened triangular area that have a ridge that comes to a point at the top of the forearm. | |
+
**This design is matched on the left forearm.
-
*Compad has detail antenna on its left.  
+
*Right forearm has a compad with (8) small buttons, (1) large main button, and (1) slightly smaller rectangular button.
-
*A second compad on the left forearm or a painted outline of a compad on the left forearm is acceptable
+
**Optional: Left arm has a second compad, an outline of a compad, or just the stripe.
 +
*Both left and right forearms are mirror images of each other.
 +
*Forearm tops have a flattened triangular area with a ridge that comes to a point at the top of the forearm.|
 +
*Compad has detail antenna on its left.
 +
*Armor is weathered with shades of grey.|
*Instead of a hard edge the top of the forearm has a bone ridge.
*Instead of a hard edge the top of the forearm has a bone ridge.
-
*Armor should be seamless. No visible traces of how the armor was assembled should be shown.}}
+
*Armor is seamless.
-
 
+
**No visible traces of how the armor was assembled are shown.}}
-
{{CRLtemplate|File:Commander Bly handplates copy.jpg|Hand Plates|
+
-
*Armor should be painted matte or satin white.
+
-
*2 inch sandy brown running center of the hand plate.
+
-
*Hand plates are mirror images of each other. 
+
-
*Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand. | | }}
+
-
 
+
-
{{CRLtemplate|File:Generic-black-gloves.jpg|Gloves|
+
-
*Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. | | }}
+
-
{{CRLtemplate|File:327th pauldron.jpg|Command Pauldron|
+
{{CRLtemplate-nolevels|File:Commander Bly handplates copy.jpg|Hand Plates|
-
*Pauldron should be Episode III style.  
+
*Armor is painted matte or satin white.
-
*The mantle over the left shoulder should be colored in the command color burnt sienna.  
+
*A two inch sandy brown stripe on center of hand plate.
-
*Right shoulder mantle should be all black. As well, the paneling on the remainder of the pauldron should be black too.  
+
*Hand plates are mirror images of each other.
-
*On the right side of the Pauldron, a ammo belt is strung down to the belt. | | }}
+
*Hand plates have a top curving ridge that comes to a point over the index or middle finger, just past the main knuckle of the hand.
 +
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:327th chest ammo belt.jpg|Chest Ammo Belt|
+
{{CRL-generic_black_gloves}}
-
*3 white ammo boxes attached to a grey strap on right side of chest. | | }}
+
-
{{CRLtemplate|File:Commander Bly chest armor copy.jpg|Chest Armor|
+
{{CRLtemplate-nolevels|File:Commander Bly chest armor copy.jpg|Chest Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Sandy Brown command stripe approximately 2 inches wide marked center vertical from neck to upper return curve.
+
*Sandy Brown command stripe, approximately 2 inches wide, is marked center vertical, from neck to upper return curve.
*Two detail slots on right breast.
*Two detail slots on right breast.
-
*Chest and back plate should match together at the sides with no gap, just a seam line.  
+
*Chest and Back armor match together at the sides with no open gap.
-
*Shoulder straps should be placed underneath the chest to connect to the back. |
+
*A seam line is present.  
-
|
+
*Shoulder straps are slotted into the detail ridges of the top connection points.
-
* Shoulder straps should be slotted into the chest into the detail ridges of the top connection points. }}
+
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:327th back armor.jpg|Back Armor|
+
{{CRLtemplate-nolevels|File:327th chest ammo belt.jpg|Chest Ammo Belt|
-
*Armor should be painted matte or satin white.
+
*(3) white ammo boxes are attached to a grey strap on right side of chest.||}}
-
*Rear tank has detailed area that contains 4 circles. Under the circles at the left side of the back there should be two parallel lines and the the right of the back there should a be a squared detail.
+
-
*Chest and back plate should match together at the sides with no gap, just a seam line.
+
-
*Shoulder straps should be placed underneath the chest to connect to the back. |  
+
-
|
+
-
*Shoulder straps should be slotted into the Back into the detail ridges of the top connection points.
+
-
*Highly detailed resin insert should replace softer details. }}
+
-
{{CRLtemplate|File:327th ab armor.jpg |Ab Armor|
+
{{CRLtemplate-onelevel|File:Clone_Back_Realistic.jpg|Back Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Four 1/4" diameter holes per side on indents of ab plate, eight holes total.
+
*Rear center of armor has a detailed that contains (4) circles.
-
*Ab section should wrap around the wearers body and be sealed at the sides or at the back.
+
**Under the circles, at the left side of the back there are (2) parallel lines.
-
*Ab section should be completely contained under the chest and back armor. |
+
**Right side of back has squared detail.
-
|
+
*Back and Chest armor match together at the sides with no open gap.
-
* Ab section should be seamless at the sides and close in the back. A detail plate should cover the seam line and hide all work.}}
+
*A seam line is present.
 +
*Shoulder straps should be placed underneath the chest to connect to the back.
 +
*Shoulder straps are slotted into the the detail ridges of the top connection points.
 +
*Armor is weathered with shades of grey.|
 +
*Highly detailed resin insert replaces softer details.|}}
-
{{CRLtemplate|File:327th cod and posterior armor.jpg|Cod and Posterior Armor|
+
{{CRLtemplate-onelevel|File:327th ab armor.jpg |Abdomen Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Cod and Posterior armor should connect at the hips. | |
+
*Four 1/4" diameter holes per side on indents of abdomen.
-
*Hips should be connected via a snap with the correct detailed shape of the armor at the connection point. }}
+
**Eight holes total.
 +
*Abdomen armor wraps around the wearers body and is sealed at the sides or back.
 +
*Abdomen is completely contained under the chest and back armor.
 +
*Armor is weathered with shades of grey.|
 +
*Abdomen is seamless at the sides and closed in the back.
 +
**A detail plate covers the seam line and hides all work.|}}
-
{{CRLtemplate|File:Commander Bly belt2 copy.jpg|Belt|
+
{{CRLtemplate-onelevel|File:CLone_cod_and_rear.jpg|Codpiece and Posterior Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*The front of the belt and front two belt boxes should be painted mustard yellow.
+
*Codpiece and Posterior armor connect at the hips.
-
*Ammo Belt with boxes and detonator.
+
*Armor is weathered with shades of grey.|
-
*Detonator is centered on the back of belt.
+
*Hips are connected via a snap with the correct detailed shape of the armor at the connection point.|}}
-
*8 boxes total, 4 on each side of abdomen and attached to the belt. |
+
-
|
+
-
*Belt Boxes should be notched and fitted flush with the details of the belt.
+
-
*Left Rear belt box should have two square buttons in the top left corner and and equal symbol detail at the bottom right.
+
-
*Right Rear belt box should have a bar with two small cylinders centered with and equal symbol detail on the bottom left.
+
-
*From the rear two belt boxes the belt should have a ribbed detailed appearance.}}
+
-
{{CRLtemplate|File:Commander Bly Kama.jpg|Kama|
+
{{CRLtemplate|File:Commander_Bly_Belt_Realistic.jpg|Belt|
-
*Kama should be kakki or tea brown color. The Kama should not be lined with matching color fabric The rear of the Kama has a split that denotes it as a two piece . Kama should start at the front belt boxes. Kama should be from a heavy material like canvas or a tight weave burlap. Kama should flow to the bottom of your knee armor. There are two straps from the kama that connect to a command buckle centered to the front of the belt. | |}}
+
*Realistic style belt, boxes, and detonator.
 +
*Armor is painted matte or satin white.
 +
*The front of the belt and front two belt boxes are painted mustard yellow.
 +
*Belt front, between front boxes, has three vertical rectangle indents which are spaced apart by two protruding rectangle areas.
 +
**The rest of the belt is flat surfaced with raised edging on top and bottom that run along the rest of the belt.
 +
*Eight Belt Boxes are attached to Belt, with four on each side.
 +
**The two largest Boxes are in front with angled top surface that is higher toward the center.  
 +
**The smallest boxes are located behind the front boxes, about 1/8 inch apart and have an angled end on top.  
 +
**The medium sized matching boxes, with flat top cover, are about 1/8 inch from smallest boxes.
 +
**Left rear box is spaced closer to detonator and has two square buttons in the top left corner, and two dashed indented detail marks on bottom right.
 +
*Right rear box is spaced closer to detonator and has a bar with two small cylinders centered, and two dashed indented detail marks on bottom left.
 +
*A detonator is centered and attached to back of Belt.
 +
**Detonator tube is about 2 1/4 inch diameter with wider detailed end caps.
 +
**Seven horizontally aligned square buttons are on left side of tube, facing backwards.
 +
*Armor is weathered with shades of grey.|
 +
*Boxes are notched on back and fit flush to belt.|
 +
*Back of belt, between rear boxes, has horizontal ribbing.
 +
*Detonator connects to back of belt without any visible clips and is firmly secured in horizontal position.}}
-
{{CRLtemplate|File:Commander Bly Thighs 2.jpg|Thigh Armor|
+
{{CRLtemplate-nolevels|File:Commander Bly Kama.jpg|Kama|
-
*Thighs are painted mustard yellow. Starting at the leg triangles and moving vertically up a sandy brown stripe should be painted.
+
*Kama is made from a heavy material like canvas or a tight weave burlap.
-
* Front of thigh armor should have a flat triangular area near the knee. From the top of the triangle a ridge line should go up the front of the thigh to the top.
+
*Kama is a khaki or tea brown color.
-
*Rear of the thigh should have an indention. |
+
*Lower center of Kama has a triangle split.
-
|
+
*Kama aligns with front belt boxes.
-
* Outside of lower portion of the thighs should come to a point and inner lower end should be rounded.
+
*Kama extends to the bottom of the knee armor.
-
*Armor should be seamless.  No visible traces of how the armor was assembled should be shown. }}
+
*There are two straps from the Kama that connect to a command buckle centered to the front of the belt.||}}
-
{{CRLtemplate|File:Commander Bly knees copy.jpg|Knee Armor|
+
{{CRLtemplate-nolevels|File:Holsters_Realistic.jpg|Holsters|
-
*Armor should be painted matte or satin white.
+
*Hung from the belt and rest at the hip on each side.||}}
-
*Knees should have a sandy brown stripe that starts at the top and runs vertically down to the bottom of the knee.
+
-
*Knees should wrap around the front of the leg. From top center a raised detail line should be present.
+
{{CRLtemplate-onelevel|File:Commander Bly Thighs 2.jpg|Thigh Armor|
-
*Knees should be strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.|  
+
*Thighs are painted mustard yellow.
-
|
+
*A sandy brown vertical stripe is painted on the front of each thigh.
-
*Center strap should be primer gray.
+
*Front of thigh armor has a flat triangular area near the knee.
-
*Connection between the knee and the strapping should have a detail clip.}}
+
*From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
 +
*Rear of the thigh has an indention.
 +
*Armor is weathered with shades of grey.|
 +
*Outside of lower portion of the thighs comes to a point and inner lower end is rounded.
 +
*Armor is seamless.
 +
**No visible traces of how the armor was assembled are shown.|}}
-
{{CRLtemplate|File:327th lower leg armor.jpg|Lower Leg Armor|
+
{{CRLtemplate-onelevel|File:Commander Bly knees copy.jpg|Knee Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Lower Legs are mirror images of each other. The front of the armor should have a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
+
*Knees have a sandy brown stripe that starts at the top and runs vertically down to the bottom of the knee.
-
*Back of the lower legs should have an indentation just under the calf the follow down to the ankle.
+
*Knees wrap around the front of the leg.
-
*Calf can have an access area on the inside of the leg.  The outside of the calf should be closed. |
+
*From top center a raised detail line is present.
-
|
+
*Knees are strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.|
-
*Calves should be seamless and have a trap door access through the indent in the rear of the lower leg.}}
+
*Center strap is primer grey.
 +
*Connection between the knee and the strapping has a detail clip.|}}
-
{{CRLtemplate|File:327th boots.jpg|Boots|
+
{{CRLtemplate-onelevel|File:Clone shins.jpg|Lower Leg Armor|
-
*White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor. Boots must be lace-less and have flat soles. The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap. This stap should be painted sandy brown. Accross the shoe just infront of detail strap another thin stripe painted sandy brown should also be placed on the boot. There should be no markings or labels from the shoe makers. The shoe soles should be gray. | | }}
+
*Armor is painted matte or satin white.
 +
*Lower Legs are mirror images of each other.
 +
*The front of the armor has a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
 +
*Back of the lower legs have an indentation just under the calf that travels down to the ankle.
 +
*The outside of the calf is closed.
 +
**Calf can have an access area on the inside of the leg.|
 +
*Calves are seamless and have a trap door access through the indent in the rear of the lower leg.|}}
-
{{CRLtemplate|File:327th commander holsters.jpg|Commander Holsters|
+
{{CRLtemplate-nolevels|File:327th boots.jpg|Boots|
-
*Hung from the belt and rest at the hip on each side. | | }}
+
*White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor.
 +
*Boots are lace-less and have flat soles.
 +
*The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap.
 +
**This strap is painted sandy brown.
 +
*Across the shoe, just in front of detail strap, another sandy brown thin stripe is placed on the boot.
 +
*There are no markings or labels from the shoe makers.
 +
*Boot soles are grey.||}}
{{CRLaccessories}}
{{CRLaccessories}}

Latest revision as of 13:42, 13 August 2014

crlblackhd.gif
Commander Bly
Commander Bly front and back copy.jpg
Model CC 9927, Photo by Thomas J Twohig II


Clone-Trooper-Detachment.png

Description: Commander Bly
Prefix: CC
Detachment: Clone Trooper Detachment
Context: Episode III: Revenge of the Sith

Commander Bly is among the first generation of clone marshal commanders to be trained by the Advanced Recon Commando "Alpha-17". Bly, having also been trained as an Advanced Recon Commando, has a more independent mindset, allowing the commander to think "outside the manual" when it comes to the shifting of tactical situations. As a commander, it is Bly's job to act as an intermediary between the Jedi Generals and the regular clone troopers. Bly is assigned to the 327th Star Corps, under the command of Aylaa Secura.


The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
  • Any uncertainties or questionable aspects of the submitted costume should be brought to the appropriate DL/GML peer review section of the legion forum.
Required Costume Components

The following costume components are present and appear as described below.

Commander Bly helmet5.jpg Helmet
For 501st approval:
  • Phase II style Helmet.
  • Helmet mohawk on dome is painted a mustard yellow color.
  • There is a sandy brown stripe down the center of the helmet that ends at the nose area and squares off at the rear of the helmet.
  • Black eye lens.
  • Macro-binoculars are mounted to the helmet.
  • Helmet frown is charcoal grey in color.
    • Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
  • Ear caps are painted a dark grey.
  • Dark blue, vertical hash marks on each side of helmet cheeks.
  • Primer grey stripe around back of dome.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Helmet has the appearance of a neck ring.
For level three certification (if applicable):
  • Helmet has an enclosed complete neck ring that seals the helmet to the neck.
  • Macro-binoculars are able to move up and down.


Clone trooper neck seal.jpg Neck Seal
For 501st approval:
  • Neck seal is black in color with vertical ribbing or being smooth in appearance.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.



TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


327th pauldron.jpg Pauldron
For 501st approval:
  • Pauldron is Episode III style.
  • The mantle over the left shoulder is colored burnt sienna.
  • Right shoulder mantle is all black.
  • The paneling on the remainder of the pauldron is black.
  • A ammo belt is strung on the right side of the Pauldron.


Commander Bly Shoulder armor copy.jpg Shoulder Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Sandy Brown command stripe.
    • This is a forward facing stripe.
    • Front part of the stripe is painted like any other command stripe.
    • Rear part of stripe is placed in the center of the shoulder.
  • Shoulders are tear drop in shape with all rounded edges.
  • Shoulders are symmetrical.
    • The armor slightly curves back at the bottom of the shoulder.
  • Armor is weathered with shades of grey.


Commander Bly bicep armor copy.jpg Upper Arm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Sandy brown stripe starts on the hard outside edge of the bicep and extends to the middle of the outside bicep.
    • Stripe is not the same as the Ep.II command stripes.
  • (2) smaller white ammo boxes are attached to the right bicep on a grey strap.
    • One ammo box is attached to the front, and one is attached to the outside panel of the bicep.
  • A dimple on the lower area of the back of the arm.
  • The outside of the arm has a hard line edge at the front that turns in.
    • The inside of the upper arm is rounded.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Armor is weathered with shades of grey.



Clone elbow copy.jpg Elbow Armor
For 501st approval:
  • Realistic style elbow armor.
  • Armor is painted matte or satin white.
  • Elbow straps have a raised detail line at the top and bottom of the strap.
  • Armor has two parallel dashed detail slots on each outside edge of elbow at the strap connection.
  • Elbows are mirror images of each other with a notched area on the outside of the elbow above the detail marks.
  • Armor is weathered with shades of grey.


Commander Bly forarms copy.jpg Forearm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • A two inch sandy brown stripe on the top part of the forearm.
    • On the right arm it would cover over the compad.
    • Compad remains white.
    • This design is matched on the left forearm.
  • Right forearm has a compad with (8) small buttons, (1) large main button, and (1) slightly smaller rectangular button.
    • Optional: Left arm has a second compad, an outline of a compad, or just the stripe.
  • Both left and right forearms are mirror images of each other.
  • Forearm tops have a flattened triangular area with a ridge that comes to a point at the top of the forearm.
For level two certification (if applicable):
  • Compad has detail antenna on its left.
  • Armor is weathered with shades of grey.
For level three certification (if applicable):
  • Instead of a hard edge the top of the forearm has a bone ridge.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
Commander Bly handplates copy.jpg Hand Plates
For 501st approval:
  • Armor is painted matte or satin white.
  • A two inch sandy brown stripe on center of hand plate.
  • Hand plates are mirror images of each other.
  • Hand plates have a top curving ridge that comes to a point over the index or middle finger, just past the main knuckle of the hand.
  • Armor is weathered with shades of grey.



Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.


Commander Bly chest armor copy.jpg Chest Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Sandy Brown command stripe, approximately 2 inches wide, is marked center vertical, from neck to upper return curve.
  • Two detail slots on right breast.
  • Chest and Back armor match together at the sides with no open gap.
  • A seam line is present.
  • Shoulder straps are slotted into the detail ridges of the top connection points.
  • Armor is weathered with shades of grey.


327th chest ammo belt.jpg Chest Ammo Belt
For 501st approval:
  • (3) white ammo boxes are attached to a grey strap on right side of chest.


Clone Back Realistic.jpg Back Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Rear center of armor has a detailed that contains (4) circles.
    • Under the circles, at the left side of the back there are (2) parallel lines.
    • Right side of back has squared detail.
  • Back and Chest armor match together at the sides with no open gap.
  • A seam line is present.
  • Shoulder straps should be placed underneath the chest to connect to the back.
  • Shoulder straps are slotted into the the detail ridges of the top connection points.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Highly detailed resin insert replaces softer details.
327th ab armor.jpg Abdomen Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Four 1/4" diameter holes per side on indents of abdomen.
    • Eight holes total.
  • Abdomen armor wraps around the wearers body and is sealed at the sides or back.
  • Abdomen is completely contained under the chest and back armor.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Abdomen is seamless at the sides and closed in the back.
    • A detail plate covers the seam line and hides all work.
CLone cod and rear.jpg Codpiece and Posterior Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Codpiece and Posterior armor connect at the hips.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Hips are connected via a snap with the correct detailed shape of the armor at the connection point.
Commander Bly Belt Realistic.jpg Belt
For 501st approval:
  • Realistic style belt, boxes, and detonator.
  • Armor is painted matte or satin white.
  • The front of the belt and front two belt boxes are painted mustard yellow.
  • Belt front, between front boxes, has three vertical rectangle indents which are spaced apart by two protruding rectangle areas.
    • The rest of the belt is flat surfaced with raised edging on top and bottom that run along the rest of the belt.
  • Eight Belt Boxes are attached to Belt, with four on each side.
    • The two largest Boxes are in front with angled top surface that is higher toward the center.
    • The smallest boxes are located behind the front boxes, about 1/8 inch apart and have an angled end on top.
    • The medium sized matching boxes, with flat top cover, are about 1/8 inch from smallest boxes.
    • Left rear box is spaced closer to detonator and has two square buttons in the top left corner, and two dashed indented detail marks on bottom right.
  • Right rear box is spaced closer to detonator and has a bar with two small cylinders centered, and two dashed indented detail marks on bottom left.
  • A detonator is centered and attached to back of Belt.
    • Detonator tube is about 2 1/4 inch diameter with wider detailed end caps.
    • Seven horizontally aligned square buttons are on left side of tube, facing backwards.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Boxes are notched on back and fit flush to belt.
For level three certification (if applicable):
  • Back of belt, between rear boxes, has horizontal ribbing.
  • Detonator connects to back of belt without any visible clips and is firmly secured in horizontal position.
Commander Bly Kama.jpg Kama
For 501st approval:
  • Kama is made from a heavy material like canvas or a tight weave burlap.
  • Kama is a khaki or tea brown color.
  • Lower center of Kama has a triangle split.
  • Kama aligns with front belt boxes.
  • Kama extends to the bottom of the knee armor.
  • There are two straps from the Kama that connect to a command buckle centered to the front of the belt.


Holsters Realistic.jpg Holsters
For 501st approval:
  • Hung from the belt and rest at the hip on each side.


Commander Bly Thighs 2.jpg Thigh Armor
For 501st approval:
  • Thighs are painted mustard yellow.
  • A sandy brown vertical stripe is painted on the front of each thigh.
  • Front of thigh armor has a flat triangular area near the knee.
  • From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
  • Rear of the thigh has an indention.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Outside of lower portion of the thighs comes to a point and inner lower end is rounded.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
Commander Bly knees copy.jpg Knee Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Knees have a sandy brown stripe that starts at the top and runs vertically down to the bottom of the knee.
  • Knees wrap around the front of the leg.
  • From top center a raised detail line is present.
  • Knees are strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.
For level two certification (if applicable):
  • Center strap is primer grey.
  • Connection between the knee and the strapping has a detail clip.
Clone shins.jpg Lower Leg Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Lower Legs are mirror images of each other.
  • The front of the armor has a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
  • Back of the lower legs have an indentation just under the calf that travels down to the ankle.
  • The outside of the calf is closed.
    • Calf can have an access area on the inside of the leg.
For level two certification (if applicable):
  • Calves are seamless and have a trap door access through the indent in the rear of the lower leg.
327th boots.jpg Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor.
  • Boots are lace-less and have flat soles.
  • The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap.
    • This strap is painted sandy brown.
  • Across the shoe, just in front of detail strap, another sandy brown thin stripe is placed on the boot.
  • There are no markings or labels from the shoe makers.
  • Boot soles are grey.


Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.


CRL side arms.jpg DC-17 Hand Blaster
For 501st approval:

Manufactured by BlasTech Industries, DC-17 pistols are carried in quick-release holsters. They are widely recognized for their unusually high stopping power and firing rate.

  • The number of pistols carried is dependent on the amount of holsters.
  • This is the realistic variant of the DC-17 blaster.



DC15 carbine.jpg DC-15S Blaster
For 501st approval:

Manufactured by BlasTech Industries the DC-15S is smaller in scale than the DC-15A blaster rifle. Although it has a shorter range than that of the "A" model, it is easier to handle with a higher rate of fire. It features a folding stock for braced firing.

  • Realistic Clone Style DC-15S Blaster.
  • Blaster may be scratch built out of plastic, wood, metal or cast in resin.
  • Blaster has realistic Episode II or Episode III details:
    • Wire frame sight.
    • Folding stock.
    • (12) radiator fins evenly spaced along the length of barrel.
    • Igniter detail knobs.
    • Charge magazine clip on right side.
  • Total length is approximately 26“ (66 cm).
  • Because of the scale, the Hasbro version is incorrect.
For level two certification (if applicable):
  • Charge magazine detail on clip is metal to gun metal grey in color.
  • Detail bolts and screws are metal to gun metal grey in color.
  • Igniter knobs have some copper coloring.
  • Blaster is weathered.
For level three certification (if applicable):
  • Functioning Blue LED is installed in barrel.


DC15 rifle.jpg DC-15A Blaster Rifle
For 501st approval:

Manufactured by BlasTech Industries, the DC-15A is a tibanna gas, cartridge powered weapon. Hyper-ionized blue plasma bolts are more than capable of penetrating armored units. Exceptionally effective against both droids and contemporary targets.

  • Realistic Clone Style DC-15A Blaster Rifle.
  • Blaster rifle is scratch built out of plastic, wood, metal or cast in resin.
  • Blaster has realistic Episode II or Episode III details:
    • Flip up sight in down position.
    • (10) radiator fins evenly spaced along the length of barrel.
    • Power setting adjuster detail lever.
    • Sniper Scope attached under rifle in storage position.
    • Charge magazine clip on left side.
    • Igniter detail knobs.
  • Total length is approximately 55 inches (139.7 cm).
  • Because of the scale, the Hasbro version is not allowed.
For level two certification (if applicable):
  • Charge magazine detail on clip is metal to gun metal grey in color.
  • Detail bolts and screws are metal to gun metal grey in color.
  • Igniter has some copper coloring.
  • Power setting adjuster detail lever is metal or gun metal grey.
  • Sniper scope is metal or gun metal grey.
  • Blaster is weathered.
For level three certification (if applicable):
  • Functioning Blue LED is installed in barrel.

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.