(Difference between revisions)
Line 100: Line 100:
*Armor is weathered with shades of grey.||}}
*Armor is weathered with shades of grey.||}}
-
{{CRLtemplate|File:CC_keeli_animated_kama_back.jpeg|Posterior Armor, Belt Rear and Detonator|
+
{{CRLtemplate-onelevel|File:CC_keeli_animated_kama_back.jpeg|Posterior Armor, Belt Rear and Detonator|
-
* Armor must be painted matte or satin white. If weathered, the weathering should be shades of grey.
+
*Armor is painted matte or satin white.
-
* Belt is approx 3" tall and divided into 1.75" wide segments.
+
*Belt is approx 3" tall and divided into 1.75" wide segments.
-
* Cod and Posterior armor should connect at the hips. Butted seams are permitted at this connection if required.
+
*Cod and Posterior armor connect at the hips.
-
* Detonator is centered on the back of belt with no control buttons. The detonator has 2 lines set in approx 1/2" - 5/8" from the edges. Lines may be recessed or painted on  
+
**Butted seams are permitted at this connection if required.
-
* The kama should be black leather, vinyl or heavy weight canvas/cotton and must have red edging to match the paint on the armor.|
+
*Detonator is centered on the back of belt.
-
* Armor must be weathered.
+
**Detonator has no control buttons.
-
* Detonator lines must be recessed.|}}
+
**The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
 +
***Lines may be recessed or painted on.
 +
*Armor is weathered with shades of grey|
 +
*Detonator lines are recessed.|}}
{{CRL-TC_animated_belt_boxes}}
{{CRL-TC_animated_belt_boxes}}

Revision as of 04:43, 22 June 2014

crlblackhd.gif
Captain Keeli
CC keeli animated full.jpg
Model Brad White, Photo by CC-7396


Clone-Trooper-Detachment.png

Description: Captain Keeli
Prefix: CC
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Season 3 - Episode 3

Commander Keeli serves in the Grand Army of the Republic at the rank of Captain. An experienced and dedicated soldier, Keeli often disregards personal safety in favor of doing what is necessary to help those in need of combat assistance and protection.


The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
  • Any uncertainties or questionable aspects of the submitted costume should be brought to the appropriate DL/GML peer review section of the legion forum.
Required Costume Components

The following costume components are present and appear as described below.

CC keeli animated head.jpeg Helmet
For 501st approval:
  • Phase I style helmet.
    • Movie style helmets are not combined with animated armor.
  • Base of helmet is painted matte or satin white.
  • Narrow fin on top of dome.
  • Rust colored details are painted as shown.
  • Black eye lens extends down through the entire frown area.
  • Raised bump at each ear, 1" - 1.25" in diameter.
  • (4) vents on each side of helmet.
    • Vents may be painted black or grey, or cut out and filled with black mesh.
  • Primer grey indented helmet band on back of helmet.
  • Raised white circle and rectangular white indent at the back center of helmet.
  • Armor is weathered with shades of grey.



TC animated neckseal.jpg Neck Seal
For 501st approval:
  • Neck seal is black in color with no ribbing.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.
For level two certification (if applicable):
  • Neck seal closes in the front via 2 small black snaps.


TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


CC keeli animated shoulders1.jpeg Shoulder Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Rust colored detailsare painted as shown.
  • Shoulders are padded so as not to rest flat against the arms.
    • The top of the bell sits 3/4" - 1" above the natural shoulder.
  • Armor is weathered with shades of grey.


CC keeli animated biceps front.jpeg Upper Arm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Rust colored details are painted as shown.
  • Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Armor is weathered with shades of grey.


CC keeli animated forearms outside.jpeg Forearm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Rust colored details must be painted as shown.
  • Left forearm has a compad with 4 main square recessed areas and 1 slightly smaller square recessed area.
    • The smaller recess is closest to the elbow.
  • Armor is seamless on the outside edge.
    • Due to the shape of the armor, a butted seam is acceptable on the inside if required.
  • Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
CC keeli animated handplates.jpeg Hand Plates
For 501st approval:
  • Armor is painted a red rust color.
  • Hand plates are mirror images of each other.
  • Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
  • Armor is weathered with shades of grey.



Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.


CC keeli animated chest.jpeg Chest Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Rust colored details are painted as shown.
  • Lower portion of the chest has a curved notch for the abdomen armor to fit into.
  • Chest and back plate match together at the sides and shoulders with no open gap.
    • Butted seam lines are permitted if required.
  • Shoulder straps are placed over the chest and back armor at the seams.
  • Armor is weathered with shades of grey.


CC keeli animated back.jpeg Back Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Rust colored details are painted as shown.
  • Rear center of back armor has detailed area that contains a O11 pattern.
  • Shoulder straps may be omitted from this costume due to the mantle/pauldron.
  • Armor is weathered with shades of grey.



TC animated ab.jpg Abdomen Armor
For 501st approval:
  • Animated Phase I Abdomen Armor.
  • Armor is painted matte or satin white.
  • Top edge of the armor is curved to match the chest.
  • Abdomen armor protrudes out in the middle to match the shape of the chest.
  • (4) inset lines divide the abdomen armor into segments.
  • Abdomen and Kidney armor connect at the sides with no open gap.
    • A butted seam between abdomen and kidney armor is acceptable.
  • Armor is weathered with shades of grey.



TC animated grunt kidney.jpg Kidney Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Kidney and abdomen armor connect at the sides with no open gap.
    • A butted seam between the kidney and abdomen armor is acceptable.
  • Armor is weathered with shades of grey.


150px Codpiece and Belt front
For 501st approval:
  • Armor is painted matte or satin white.
  • Center upper area of codpiece is painted with a rust color.
  • Belt is approx 3" tall and divided into 1.75" wide segments.
  • The front segments have a key/slot detail.
  • Belt boxes are mounted at the hips.
  • Cod and Posterior armor are connected at the hips.
    • Butted seams are permitted at this connection if required.
  • Armor is weathered with shades of grey.


150px Posterior Armor, Belt Rear and Detonator
For 501st approval:
  • Armor is painted matte or satin white.
  • Belt is approx 3" tall and divided into 1.75" wide segments.
  • Cod and Posterior armor connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Detonator is centered on the back of belt.
    • Detonator has no control buttons.
    • The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
      • Lines may be recessed or painted on.
  • Armor is weathered with shades of grey
For level two certification (if applicable):
  • Detonator lines are recessed.


TC animated belt box.jpg Belt Boxes
For 501st approval:
  • Two rectangular boxes with one mounted on each side of belt.
  • Boxes are painted matte or satin white.
    • The top side of the box is tapered outward.
    • There is an inset detail near the top of each box.
  • Armor is weathered with shades of grey.


Blankwhite.gif Kama
For 501st approval:
  • The kama is made of black leather, leather like material, or heavy canvas.
  • The kama has dark rust colored trim that matches the color of the armor details.
  • The front edges of the kama line up with the outside edges of the front two segments of the belt.
  • The back of the kama is split all the way up to the belt.



Holsters White Animated.jpg Holsters
For 501st approval:
  • Holsters are painted matte or satin white.
  • Holsters may connect to the belt via straps or directly to the kama with no visible attachment.
  • Armor is weathered with shades of grey.


CC keeli animated thighs front.jpeg Thigh Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Rust colored details are painted as shown.
  • Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
    • From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
CC keeli animated shins front.jpeg Lower Leg Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Rust colored details are painted as shown.
  • Knee armor is integrated with the lower leg.
  • The armor has a flat center triangle below the knee plate, with the single point facing downward.
  • The calf detail of the armor has a ridge wrapping around the back of the leg.
  • Due to the shape of the armor, a butted seam is permitted on the inside or back of the shin.
  • Armor is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
CC keeli animated shoes.jpeg Boots
For 501st approval:
  • Rust colored, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
  • Boots are lace-less and have flat soles.
  • Boots have a center strip running from the toe to the ankle.
  • A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.
For level two certification (if applicable):
  • Boots have accurate notched sole.
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.


CW animated dc17 pistol.jpg DC-17 Hand Blaster (animated style)
For 501st approval:

Manufactured by BlasTech Industries, DC-17 pistols are designed for use as secondary weapons. Because they are widely recognized for their high stopping power and firing rate, many battlefield officers use them as primarily combat weapons.

  • This is the animated variant of the DC-17 blaster.
  • The number of pistols carried is dependent on the amount of holsters.



CRLdc15s-animated.jpg DC-15S Blaster Carbine (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.

  • This is the animated variant of the DC-15S blaster rifle.



Dc15a Animated.jpg DC-15A Blaster Rifle (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.

  • This is the animated variant of the DC-15A blaster rifle.


This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:CC_CW-animated_keeli

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.