(Difference between revisions)
(6 intermediate revisions not shown)
Line 12: Line 12:
{{CRLtemplate|File:E3 Clone Helmet.jpg | Helmet|
{{CRLtemplate|File:E3 Clone Helmet.jpg | Helmet|
-
*Episode 3 style Clone Helmet - Fanmade bucket. Some "name brand" helmets may be unacceptable.
+
*Episode 3 style Clone Helmet.
-
*Helmet must be painted matte or satin white.
+
**Fanmade bucket. Some "name brand" helmets may be unacceptable.
 +
*Helmet is painted matte or satin white.
*Visor - Mirrored Chrome or Black Visor
*Visor - Mirrored Chrome or Black Visor
*Mohawk on dome has raised edges on the outside edges of the top.
*Mohawk on dome has raised edges on the outside edges of the top.
Line 24: Line 25:
*Ear bars are painted a dark grey.  The raised edge around the ear cap is painted black.
*Ear bars are painted a dark grey.  The raised edge around the ear cap is painted black.
*Rectangular “grid” on back of helmet painted black.|
*Rectangular “grid” on back of helmet painted black.|
-
*Helmet has the appearance of a neck ring. |
+
*Helmet has the appearance of a neck ring.|
-
*Helmet has an enclosed complete neck ring that seals the helmet to the neck.}}
+
*Helmet has an enclosed complete neck ring that seals the helmet to the neck.
 +
*White areas are weathered with shades of grey.}}
{{CRL-realistic-clone-neckseal}}
{{CRL-realistic-clone-neckseal}}
 +
 +
{{CRL-generic-undersuit}}
{{CRLtemplate|File:Appo_Comic_Pauldron.jpg |Command Pauldron|
{{CRLtemplate|File:Appo_Comic_Pauldron.jpg |Command Pauldron|
Line 33: Line 37:
*Shoulder mantle and paneling is colored black.||}}
*Shoulder mantle and paneling is colored black.||}}
-
{{CRL-generic-undersuit}}
+
{{CRLtemplate|File:Appo_Comic_Shoulders.jpg|Shoulder Bells|
-
 
+
-
{{CRLtemplate|File:501st clone shoulder bells2.jpg |Shoulder Bells|
+
*Armor is painted blue.
*Armor is painted blue.
*Shoulders should be tear drop in shape with all rounded edges.||
*Shoulders should be tear drop in shape with all rounded edges.||
-
*Shoulder bells should not be symmetrical. The pieces slightly curve back at the bottom of the shoulder.}}
+
*Shoulder bells should not be symmetrical. The pieces slightly curve back at the bottom of the shoulder.
 +
*The shoulders are weathered with heavy scuff marks and patchy color faded areas.}}
-
{{CRLtemplate|File:Clone_Biceps.jpg|Upper Arm Armor|
+
{{CRLtemplate|File:Blankwhite.gif|Upper Arm Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Should have a dimple on the lower area of the back of the arm. The outside of the bicep should have a hard line edge at the front that turns in. The inside of the upper arm should be rounded.||
+
*3 smaller white ammo boxes are attached to the right bicep on a white strap.
 +
*Armor piece has a dimple on the lower area of the back of the arm.
 +
*The outside of the bicep has a hard line edge at the front that turns in.
 +
*The inside of the upper arm should be rounded.||
*Armor should be seamless.  No visible traces of how the armor was assembled should be shown.}}
*Armor should be seamless.  No visible traces of how the armor was assembled should be shown.}}
{{CRLtemplate|‎File:Clone elbow copy.jpg|Elbow Armor|
{{CRLtemplate|‎File:Clone elbow copy.jpg|Elbow Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
*There are two elbows. On each elbow on the outside of the body near the connection point of the elbow strap there should be detail slots that look like an equal symbol on both elbow pieces.
*There are two elbows. On each elbow on the outside of the body near the connection point of the elbow strap there should be detail slots that look like an equal symbol on both elbow pieces.
-
* Both elbows have strapping.  The straps should have a raised detail line at the top and bottom of the strap.| |
+
* Both elbows have strapping.  The straps should have a raised detail line at the top and bottom of the strap.||
-
*Elbows should be mirror images of each other with a notched area on the outside of the elbow above the detail marks.}}
+
*Elbows should be mirror images of each other with a notched area on the outside of the elbow above the detail marks.
 +
*White areas are weathered with shades of grey.}}
{{CRLtemplate|File:Clone_gauntlets_copy.jpg|Forearm Armor|
{{CRLtemplate|File:Clone_gauntlets_copy.jpg|Forearm Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
*Both left and right forearms should be mirror images of each other.
*Both left and right forearms should be mirror images of each other.
*Right forearm should have a compad that has 8 small buttons,1 Large main button, and 1 slightly smaller rectangular button.
*Right forearm should have a compad that has 8 small buttons,1 Large main button, and 1 slightly smaller rectangular button.
*Forearm tops should have a flattened triangular area that have a ridge that comes to a point at the top of the forearm.
*Forearm tops should have a flattened triangular area that have a ridge that comes to a point at the top of the forearm.
-
*The wrist of the forearm must have a blue stripe that wraps around the entire circumference of the forearm | |
+
*The wrist of the forearm must have a blue stripe that wraps around the entire circumference of the forearm.||
*Compad has detail antenna on its left.
*Compad has detail antenna on its left.
*Instead of a hard edge the top of the forearm has a bone ridge.
*Instead of a hard edge the top of the forearm has a bone ridge.
-
*Armor should be seamless.  No visible traces of how the armor was assembled should be shown.}}
+
*Armor should be seamless.  No visible traces of how the armor was assembled should be shown.
 +
*White areas are weathered with shades of grey.}}
{{CRLtemplate|File:Clone_Hand_Guards.jpg|Hand Plates|
{{CRLtemplate|File:Clone_Hand_Guards.jpg|Hand Plates|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
*Hand plates are mirror images of each other.  
*Hand plates are mirror images of each other.  
-
*Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand. | | }}
+
*Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand.
 +
*White areas are weathered with shades of grey.||}}
{{CRL-generic_black_gloves}}
{{CRL-generic_black_gloves}}
-
{{CRLtemplate||Chest Ammo Belt|
+
{{CRLtemplate|File:Clone chest copy.jpg|Chest Armor|
-
*3 ammo boxes are attached to a black strap on right side of chest.  
+
*Armor is painted matte or satin white.
-
*2 of the boxes are blue and one is black
+
*Two detail slots on the bottom right of the right breast.
-
*All of the boxes should have a black detail in the middle of each.
+
*Chest and back plate should match together at the sides with no gap, just a seam line.
-
| | }}
+
*Shoulder straps should be placed underneath the chest to connect to the back. ||
 +
* Shoulder straps should be slotted into the chest into the detail ridges of the top connection points.
 +
*White areas are weathered with shades of grey.}}
-
{{CRLtemplate|File:501st clone chest plate2.jpg|Chest Armor|
+
{{CRLtemplate|File:Clone back.jpg|Back Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
-
*Two detail slots on right breast.
+
-
*Chest armor must have a blue stripe that begins at the center of the neck and extends down the chest plate to the bottom of the breast plate. From there it extends out towards the sides. Consult reference images for more detail.
+
-
*Chest and back plate should match together at the sides with no gap, just a seam line.
+
-
*Shoulder straps should be placed underneath the chest to connect to the back. ||
+
-
* Shoulder straps should be slotted into the chest into the detail ridges of the top connection points. }}
+
-
+
-
{{CRLtemplate|File:501st clone back plate 2.jpg|Back Armor|
+
-
*Armor should be painted matte or satin white.
+
*Rear tank has detailed area that contains 4 circles. Under the circles at the left side of the back there should be two parallel lines and the the right of the back there should a be a squared detail.
*Rear tank has detailed area that contains 4 circles. Under the circles at the left side of the back there should be two parallel lines and the the right of the back there should a be a squared detail.
-
*Rear tank detailed area is painted blue.
+
*Chest and back plate should match together at the sides with no gap, just a seam line.  
-
*Chest and back plate should match together at the sides with no gap, just a seam line.
+
*Shoulder straps should be placed underneath the chest to connect to the back. ||
*Shoulder straps should be placed underneath the chest to connect to the back. ||
-
*Shoulder straps should be slotted into the Back into the detail ridges of the top connection points.
+
*Shoulder straps should be slotted into the Back into the detail ridges of the top connection points.
-
*Highly detailed resin insert should replace softer details. }}
+
*Highly detailed resin insert should replace softer details.}}
-
{{CRLtemplate|File:Clone abb2.jpg|Ab Armor|
+
{{CRLtemplate|File:Clone abb.jpg|Ab Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
*Four 1/4" diameter holes per side on indents of ab plate, eight holes total.
*Four 1/4" diameter holes per side on indents of ab plate, eight holes total.
*Ab section should wrap around the wearers body and be sealed at the sides or at the back.
*Ab section should wrap around the wearers body and be sealed at the sides or at the back.
-
*Ab section should be completely contained under the chest and back armor. ||
+
*Ab section should be completely contained under the chest and back armor.||
-
* Ab section should be seamless at the sides and close in the back.  A detail plate should cover the seam line and hide all work.}}
+
*Ab section should be seamless at the sides and close in the back.  A detail plate should cover the seam line and hide all work.}}
-
+
 
-
+
{{CRLtemplate|File:CLone cod and rear.jpg|Cod and Posterior Armor|
-
{{CRLtemplate|File:CLone cod and rear.jpg|Cod and Posterior Armor|
+
*Armor is painted matte or satin white.
-
*Armor should be painted matte or satin white.
+
*Cod and Posterior armor should connect at the hips.||
-
*Cod and Posterior armor should connect at the hips. | |
+
*Hips should be connected via a snap with the correct detailed shape of the armor at the connection point. }}
*Hips should be connected via a snap with the correct detailed shape of the armor at the connection point. }}
-
+
 
-
+
{{CRLtemplate|File:Clone Belt copy.jpg|Belt|
{{CRLtemplate|File:Clone Belt copy.jpg|Belt|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
*Ammo Belt with boxes and detonator.
*Ammo Belt with boxes and detonator.
-
*Detonator is centered on the back of belt.
+
*Detonator is centered on the back of belt.  
-
*8 boxes total, 4 on each side of abdomen and attached to the belt. ||
+
*8 boxes total, 4 on each side of abdomen and attached to the belt.||
*Belt Boxes should be notched and fitted flush with the details of the belt.
*Belt Boxes should be notched and fitted flush with the details of the belt.
*Left Rear belt box should have two square buttons in the top left corner and and equal symbol detail at the bottom right.
*Left Rear belt box should have two square buttons in the top left corner and and equal symbol detail at the bottom right.
*Right Rear belt box should have a bar with two small cylinders centered with and equal symbol detail on the bottom left.
*Right Rear belt box should have a bar with two small cylinders centered with and equal symbol detail on the bottom left.
*From the rear two belt boxes the belt should have a ribbed detailed appearance.}}
*From the rear two belt boxes the belt should have a ribbed detailed appearance.}}
-
+
 
-
+
{{CRLtemplate|File:Appo_Comic_Kama.jpg|Kama|
-
{{CRLtemplate|File:501st clone thigh armor 2.jpg|Thigh Armor|
+
*Kama is constructed from a heavy material like canvas or a tight weave burlap.
-
*Armor should be painted matte or satin white.
+
**The Kama should not be lined with matching color fabric.
-
* Front of thigh armor should have a flat triangular area near the knee.  From the top of the triangle a ridge line should go up the front of the thigh to the top.
+
*Kama is a solid black color with matching trim.
-
*Rear of the thigh should have an indention.
+
*The rear of the Kama has a split in the bottom center.
-
*Down the outside of each thigh, there are 2 blue stripes spaced about an inch apart. These stripes line up with the stripes on the calves. ||
+
*Kama is mounted at the start of the front belt boxes.
-
* Outside of lower portion of the thighs should come to a point and inner lower end should be rounded.
+
*Kama extends to the bottom of your knee armor.
-
*Armor should be seamless.  No visible traces of how the armor was assembled should be shown. }}
+
*There are two straps from the kama that connect to a command buckle centered on the front of the belt.||}}
-
+
 
-
{{CRLtemplate||Knee Armor|
+
{{CRLtemplate|File:Clone thighs.jpg|Thigh Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.  
 +
*Front of thigh armor should have a flat triangular area near the knee.  From the top of the triangle a ridge line should go up the front of the thigh to the top.
 +
*Bottom rear of the thigh should have an indentation.
 +
*Armor should be seamless. No visible traces of how the armor was assembled should be shown.||
 +
*Outside of lower portion of the thighs should come to a point and inner lower end should be rounded.}}
 +
 
 +
{{CRLtemplate|File:Clone knees copy.jpg|Knee Armor|
 +
*Armor is painted matte or satin white.
*Knees should wrap around the front of the leg.  From top center a raised detail line should be present.
*Knees should wrap around the front of the leg.  From top center a raised detail line should be present.
-
*Knees should be strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.
+
*Knees should be strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.||
-
*There is a blue stripe that follows the bottom curve of the knee plate.|
+
*Center strap should be primer gray.
*Center strap should be primer gray.
-
*Connection between the knee and the strapping should have a detail clip.|}}
+
*Connection between the knee and the strapping should have a detail clip.}}
-
+
 
-
{{CRLtemplate|File:501st clone shin armor2.jpg|Lower Leg Armor|
+
{{CRLtemplate|File:Clone shins.jpg|Lower Leg Armor|
-
*Armor should be painted matte or satin white.
+
*Armor is painted matte or satin white.
*Lower Legs are mirror images of each other. The front of the armor should have a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
*Lower Legs are mirror images of each other. The front of the armor should have a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
*Back of the lower legs should have an indentation just under the calf the follow down to the ankle.
*Back of the lower legs should have an indentation just under the calf the follow down to the ankle.
-
*Calf can have an access area on the inside of the leg.  The outside of the calf should be closed.
+
*Calf can have an access area on the inside of the leg.  The outside of the calf should be closed.||
-
*Down the outside of each calf , there are 2 blue stripes spaced about an inch apart. These stripes line up with the stripes on the thighs. ||
+
*Calves should be seamless and have a trap door access through the indent in the rear of the lower leg.
-
*Calves should be seamless and have a trap door access through the indent in the rear of the lower leg.}}
+
*Outside of the lower leg should have a pointed tip at the top and the inside of the lower leg should be rounded off at the top.}}
-
+
 
-
{{CRLtemplate|File:Clone shoes copy.jpg|Boots|
+
{{CRLtemplate|File:Clone shoes copy.jpg |Boots|
*White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor.  
*White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor.  
* Boots must be lace-less and have flat soles.  
* Boots must be lace-less and have flat soles.  
*The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap.  
*The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap.  
-
* This strap should be white.  
+
* This strap shall be white to match the boot.  
-
*There should be no markings or labels from the shoe makers. The shoe soles should be gray. | | }}
+
*There shall be no markings or labels from the shoe makers. The shoe soles should be gray.||}}
-
+
{{CRLaccessories}}
{{CRLaccessories}}
-
+
 
{{CRLdc15s-realistic}}
{{CRLdc15s-realistic}}
-
+
 
{{CRLdc15a-realistic}}
{{CRLdc15a-realistic}}
{{CRLfooter|CTN_CRL|C}}
{{CRLfooter|CTN_CRL|C}}

Revision as of 23:54, 3 April 2014

crlblackhd.gif
Commander Appo (Comic Version)
Missingprofile.jpg
Model MODEL NAME, Photo by PHOTOGRAPHER NAME


Clone-Trooper-Detachment.png

Description: Commander Appo (Comic Version)
Prefix: CC
Detachment: Clone Trooper Detachment
Context: Star Wars comic : Dark Times #4:

Appo wore this version of the armor while serving aboard Vader's Imperator-class Star Destroyer, the "Exactor". Working with Clone Commander Vill, Appo oversaw the removal of Separatist forces from their holdout worlds.


The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

  • This CRL is a work in progress.
  • As such, this costume must be approved by the Legion Membership Officer, via the appropriate section of the Legion forum.
  • If you have this costume and would like to assist with the completion of this library entry, please contact your detachment leader.
  • Please note that the use of the word "should" below does not indicate that the armor piece is considered open to interpretation. All instances of "should be" and "should have" will be replaced with "is" and "has", as this guide is completed.

Required Costume Components

The following costume components are present and appear as described below.

E3 Clone Helmet.jpg Helmet
For 501st approval:
  • Episode 3 style Clone Helmet.
    • Fanmade bucket. Some "name brand" helmets may be unacceptable.
  • Helmet is painted matte or satin white.
  • Visor - Mirrored Chrome or Black Visor
  • Mohawk on dome has raised edges on the outside edges of the top.
  • Tube stripes on each side are dark blue in color. There are 9 stripes per side
  • Frown is charcoal grey in color and has 7 teeth – 1 in the middle and three on each side. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
  • Primer grey stripe around back of dome.
  • Bar above the visor wrapping around the sides is painted black.
  • Vocoder (chip detail) is painted black.
  • Aerators (cylinders on either side of the vocoder) are painted black, with the center round part painted silver.
  • Ear bars are painted a dark grey. The raised edge around the ear cap is painted black.
  • Rectangular “grid” on back of helmet painted black.
For level two certification (if applicable):
  • Helmet has the appearance of a neck ring.
For level three certification (if applicable):
  • Helmet has an enclosed complete neck ring that seals the helmet to the neck.
  • White areas are weathered with shades of grey.


Clone trooper neck seal.jpg Neck Seal
For 501st approval:
  • Neck seal is black in color with vertical ribbing or being smooth in appearance.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.



TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


Appo Comic Pauldron.jpg Command Pauldron
For 501st approval:
  • Pauldron is Episode III style.
  • Shoulder mantle and paneling is colored black.
For level two certification (if applicable):
For level three certification (if applicable):
Appo Comic Shoulders.jpg Shoulder Bells
For 501st approval:
  • Armor is painted blue.
  • Shoulders should be tear drop in shape with all rounded edges.
For level two certification (if applicable):
For level three certification (if applicable):
  • Shoulder bells should not be symmetrical. The pieces slightly curve back at the bottom of the shoulder.
  • The shoulders are weathered with heavy scuff marks and patchy color faded areas.
Blankwhite.gif Upper Arm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • 3 smaller white ammo boxes are attached to the right bicep on a white strap.
  • Armor piece has a dimple on the lower area of the back of the arm.
  • The outside of the bicep has a hard line edge at the front that turns in.
  • The inside of the upper arm should be rounded.
For level two certification (if applicable):
For level three certification (if applicable):
  • Armor should be seamless. No visible traces of how the armor was assembled should be shown.
Clone elbow copy.jpg Elbow Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • There are two elbows. On each elbow on the outside of the body near the connection point of the elbow strap there should be detail slots that look like an equal symbol on both elbow pieces.
  • Both elbows have strapping. The straps should have a raised detail line at the top and bottom of the strap.
For level two certification (if applicable):
For level three certification (if applicable):
  • Elbows should be mirror images of each other with a notched area on the outside of the elbow above the detail marks.
  • White areas are weathered with shades of grey.
Clone gauntlets copy.jpg Forearm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Both left and right forearms should be mirror images of each other.
  • Right forearm should have a compad that has 8 small buttons,1 Large main button, and 1 slightly smaller rectangular button.
  • Forearm tops should have a flattened triangular area that have a ridge that comes to a point at the top of the forearm.
  • The wrist of the forearm must have a blue stripe that wraps around the entire circumference of the forearm.
For level two certification (if applicable):
For level three certification (if applicable):
  • Compad has detail antenna on its left.
  • Instead of a hard edge the top of the forearm has a bone ridge.
  • Armor should be seamless. No visible traces of how the armor was assembled should be shown.
  • White areas are weathered with shades of grey.
Clone Hand Guards.jpg Hand Plates
For 501st approval:
  • Armor is painted matte or satin white.
  • Hand plates are mirror images of each other.
  • Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand.
  • White areas are weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):


Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.


Clone chest copy.jpg Chest Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Two detail slots on the bottom right of the right breast.
  • Chest and back plate should match together at the sides with no gap, just a seam line.
  • Shoulder straps should be placed underneath the chest to connect to the back.
For level two certification (if applicable):
For level three certification (if applicable):
  • Shoulder straps should be slotted into the chest into the detail ridges of the top connection points.
  • White areas are weathered with shades of grey.
Clone back.jpg Back Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Rear tank has detailed area that contains 4 circles. Under the circles at the left side of the back there should be two parallel lines and the the right of the back there should a be a squared detail.
  • Chest and back plate should match together at the sides with no gap, just a seam line.
  • Shoulder straps should be placed underneath the chest to connect to the back.
For level two certification (if applicable):
For level three certification (if applicable):
  • Shoulder straps should be slotted into the Back into the detail ridges of the top connection points.
  • Highly detailed resin insert should replace softer details.
Clone abb.jpg Ab Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Four 1/4" diameter holes per side on indents of ab plate, eight holes total.
  • Ab section should wrap around the wearers body and be sealed at the sides or at the back.
  • Ab section should be completely contained under the chest and back armor.
For level two certification (if applicable):
For level three certification (if applicable):
  • Ab section should be seamless at the sides and close in the back. A detail plate should cover the seam line and hide all work.
CLone cod and rear.jpg Cod and Posterior Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Cod and Posterior armor should connect at the hips.
For level two certification (if applicable):
For level three certification (if applicable):
  • Hips should be connected via a snap with the correct detailed shape of the armor at the connection point.
Clone Belt copy.jpg Belt
For 501st approval:
  • Armor is painted matte or satin white.
  • Ammo Belt with boxes and detonator.
  • Detonator is centered on the back of belt.
  • 8 boxes total, 4 on each side of abdomen and attached to the belt.
For level two certification (if applicable):
For level three certification (if applicable):
  • Belt Boxes should be notched and fitted flush with the details of the belt.
  • Left Rear belt box should have two square buttons in the top left corner and and equal symbol detail at the bottom right.
  • Right Rear belt box should have a bar with two small cylinders centered with and equal symbol detail on the bottom left.
  • From the rear two belt boxes the belt should have a ribbed detailed appearance.
Appo Comic Kama.jpg Kama
For 501st approval:
  • Kama is constructed from a heavy material like canvas or a tight weave burlap.
    • The Kama should not be lined with matching color fabric.
  • Kama is a solid black color with matching trim.
  • The rear of the Kama has a split in the bottom center.
  • Kama is mounted at the start of the front belt boxes.
  • Kama extends to the bottom of your knee armor.
  • There are two straps from the kama that connect to a command buckle centered on the front of the belt.
For level two certification (if applicable):
For level three certification (if applicable):
Clone thighs.jpg Thigh Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Front of thigh armor should have a flat triangular area near the knee. From the top of the triangle a ridge line should go up the front of the thigh to the top.
  • Bottom rear of the thigh should have an indentation.
  • Armor should be seamless. No visible traces of how the armor was assembled should be shown.
For level two certification (if applicable):
For level three certification (if applicable):
  • Outside of lower portion of the thighs should come to a point and inner lower end should be rounded.
Clone knees copy.jpg Knee Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Knees should wrap around the front of the leg. From top center a raised detail line should be present.
  • Knees should be strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.
For level two certification (if applicable):
For level three certification (if applicable):
  • Center strap should be primer gray.
  • Connection between the knee and the strapping should have a detail clip.
Clone shins.jpg Lower Leg Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Lower Legs are mirror images of each other. The front of the armor should have a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
  • Back of the lower legs should have an indentation just under the calf the follow down to the ankle.
  • Calf can have an access area on the inside of the leg. The outside of the calf should be closed.
For level two certification (if applicable):
For level three certification (if applicable):
  • Calves should be seamless and have a trap door access through the indent in the rear of the lower leg.
  • Outside of the lower leg should have a pointed tip at the top and the inside of the lower leg should be rounded off at the top.
Clone shoes copy.jpg Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor.
  • Boots must be lace-less and have flat soles.
  • The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap.
  • This strap shall be white to match the boot.
  • There shall be no markings or labels from the shoe makers. The shoe soles should be gray.
For level two certification (if applicable):
For level three certification (if applicable):
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present must meet the guidelines below.


DC15 carbine.jpg DC-15S Blaster
For 501st approval:

Manufactured by BlasTech Industries the DC-15S is smaller in scale than the DC-15A blaster rifle. Although it has a shorter range than that of the "A" model, it is easier to handle with a higher rate of fire. It features a folding stock for braced firing.

  • Blaster rifle may be scratch built out of plastic, wood, metal or cast in resin.
  • Total length is approximately 26“ (66 cm).
    • Because of the scale, the Hasbro version is incorrect.
For level two certification (if applicable):
  • Folding stock (does not need to function).
  • A total of (12) radiator fins are present on the barrel.
  • Spare igniter is present on both sides of barrel.
  • Charge magazine is present on the right side.
For level three certification (if applicable):
  • Charge magazine is metal to gun metal grey in color.
  • Any bolts and screws are metal to gun metal grey in color.
  • Parts of the spare igniter are copper in color.
  • Blaster is weathered.


DC15 rifle.jpg DC-15A Blaster Rifle
For 501st approval:

Manufactured by BlasTech Industries, the DC-15A is a tibanna gas, cartridge powered weapon. Hyper-ionized blue plasma bolts are more than capable of penetrating armored units. Exceptionally effective against both droids and contemporary targets.

  • Blaster rifle is scratch built out of plastic, wood, metal or cast in resin.
  • Total length is approximately 55 inches (139.7 cm).
    • Because of the scale, the Hasbro version is not allowed.
For level two certification (if applicable):
  • A total of (10) radiator fins are present on the barrel.
  • A power setting adjuster is present.
  • The correct style of sniper scope is present.
  • Charge magazine lock is present on the left side.
  • Power setting adjuster, sniper scope and charge magazine lock is metal to gun metal gray in color.
For level three certification (if applicable):
  • Sniper scope is able to be removed from storage position (bottom of rifle) and attached to the top of the rifle.
  • Parts of the spare igniter are copper in color.
  • Front optical sight is able to flip to the up position.
  • Any bolts and screws are metal to gun metal grey in color.
  • Blaster is weathered.

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:CC_-_Commander_Appo

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.