(Difference between revisions)
Line 1: Line 1:
-
{{CRLheader|Clone Commander Bly|File:Missingprofile.jpg|MODEL NAME|PHOTOGRAPHER NAME}}
+
{{CRLheader|Commander Bly|File:Missingprofile.jpg|MODEL NAME|PHOTOGRAPHER NAME}}
-
{{CRLdetinfo| 1111 |Clone Commander|CC|The Clone Wars; Seasons 1-3|
+
{{CRLdetinfo| 1111 |Commander Bly|CC|The Clone Wars: Seasons 1-3|
Bly is a Commander assigned to the 327th Star Corps. He is fiercely loyal with an unswerving dedication to the Republic and his superior officers.}}
Bly is a Commander assigned to the 327th Star Corps. He is fiercely loyal with an unswerving dedication to the Republic and his superior officers.}}

Revision as of 03:03, 15 March 2014

crlblackhd.gif
Commander Bly
Missingprofile.jpg
Model MODEL NAME, Photo by PHOTOGRAPHER NAME


Clone-Trooper-Detachment.png

Description: Commander Bly
Prefix: CC
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Seasons 1-3

Bly is a Commander assigned to the 327th Star Corps. He is fiercely loyal with an unswerving dedication to the Republic and his superior officers.


The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

  • This CRL is a work in progress.
  • As such, this costume must be approved by the Legion Membership Officer, via the appropriate section of the Legion forum.
  • If you have this costume and would like to assist with the completion of this library entry, please contact your detachment leader.
  • Please note that the use of the word "should" below does not indicate that the armor piece is considered open to interpretation. All instances of "should be" and "should have" will be replaced with "is" and "has", as this guide is completed.

Required Costume Components

The following costume components are present and appear as described below.

Blankwhite.gif Helmet
For 501st approval:
  • Phase 1 style helmet.
  • Helmet is painted matte or satin white.
  • The top helmet fin is painted a grunge yellow color.
  • Starting from the rear of the fin and continuing up over the top of the dome and down the front of the face is painted a wide, grunge yellow color stripe.
    • This stripe ends at the bottom of the chin.
  • Black visor extends down through the entire frown area.
  • 4 Vents on each side of helmet.
    • May be painted black or grey, or cut out and filled with black mesh.
  • Ear pieces have round grey center caps.
    • Optional: LED lamps, with white painted housings, mounted to each ear piece.
  • A grey indented bans runs around to back of dome to become large rear indented section.
  • Raised matte or satin white disk at the rear center of helmet.
  • A pair of macrobinoculars are mounted to the helmet.
  • The yellow sections are weathered with heavy scuff marks and patchy areas.
  • White areas are weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):


TC animated neckseal.jpg Neck Seal
For 501st approval:
  • Neck seal is black in color with no ribbing.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.
For level two certification (if applicable):
  • Neck seal closes in the front via (2) small black snaps.


TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


Blankwhite.gif Pauldron
For 501st approval:
  • Black base.
  • 3 sections over the left shoulder, are a brown-yellow color.
  • 3 dark grey sections in the front, weathered with a lighter grey along the edges.
    • Center line, between sections is diagonal across the chest.
  • 3 dark grey sections in the back are weathered with a lighter grey along the edges
  • Rear section of mantle should extend down far enough to cover the majority of the back detail of the armor.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Shoulder Bells
For 501st approval:
  • Armor is painted matte or satin white.
  • Each shoulder has a wide, grunge yellow stripe painted down the center.
  • The yellow sections are weathered with heavy scuff marks and patchy areas.
  • White areas are weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Upper Arm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Each bicep has a wide, grunge yellow stripe painted down the center.
  • Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
  • Armor must be seamless. No visible traces of how the armor was assembled should be shown.
  • The yellow sections are weathered with heavy scuff marks and patchy areas.
  • White areas are weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Forearm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Each armor piece has a wide, grunge yellow stripe painted along the length of the forearm, from the bottom edge of the elbow section to the wrist.
  • Left forearm has a compad with 4 square recessed areas and 1 slightly smaller square recessed area.
    • The smaller recess is closest to the elbow.
  • Armor is seamless on the outside edge.
    • Due to the shape of the armor, a butted seam is acceptable on the inside if required.
  • Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
  • Elbow plate is painted matte or satin white.
    • There is no stripe on the elbow section.
  • The yellow sections are weathered with heavy scuff marks and patchy areas.
  • White areas are weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Hand Plates
For 501st approval:
  • Armor is painted matte or satin white.
  • Hand plates are mirror images of each other.
  • Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand.
  • Each armor piece has a wide, grunge yellow stripe painted down the middle.
  • The yellow sections are weathered with heavy scuff marks and patchy areas.
  • White areas are weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):


Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.


Blankwhite.gif Chest Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Chest armor has a wide, grunge yellow stripe painted down the middle.
  • Lower portion of the chest has a curved notch for the abdomen armor to fit into.
  • Chest and back plate match together at the sides and shoulders with no open gap.
    • Butted seam lines are permitted if required.
  • Shoulder straps are placed over the chest and back armor at the seams.
  • The yellow sections are weathered with heavy scuff marks and patchy areas.
  • White areas are weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):


TC animated back.jpg Back Armor
For 501st approval:
  • Animated Phase I Back Armor.
  • Armor is painted matte or satin white.
  • Rear center of back armor has detailed area that contains a O11 pattern.
  • Shoulder straps are placed over the Back and Chest armor at the seams.
  • Armor is weathered with shades of grey.



TC animated ab.jpg Abdomen Armor
For 501st approval:
  • Animated Phase I Abdomen Armor.
  • Armor is painted matte or satin white.
  • Top edge of the armor is curved to match the chest.
  • Abdomen armor protrudes out in the middle to match the shape of the chest.
  • (4) inset lines divide the abdomen armor into segments.
  • Abdomen and Kidney armor connect at the sides with no open gap.
    • A butted seam between abdomen and kidney armor is acceptable.
  • Armor is weathered with shades of grey.



TC animated grunt kidney.jpg Kidney Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Kidney and abdomen armor connect at the sides with no open gap.
    • A butted seam between the kidney and abdomen armor is acceptable.
  • Armor is weathered with shades of grey.



TC animated cod.jpg Codpiece and Belt front
For 501st approval:
  • Armor is painted matte or satin white.
  • Belt is approx 3" tall and divided into 1.75" wide segments.
  • The front segments have a key/slot detail.
  • Belt boxes are mounted at the hips.
  • Codpiece and Posterior armor connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Armor is weathered with shades of grey.


TC animated butt.jpg Posterior Armor, belt rear and detonator
For 501st approval:
  • Armor is painted matte or satin white.
  • Belt is approx 3" tall and divided into 1.75" wide segments.
  • Cod and Posterior armor should connect at the hips. Butted seams are permitted at this connection if required.
  • Detonator is centered on the back of belt with no control buttons. The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
    • Lines may be recessed or painted on.
  • White areas are weathered with shades of grey.
For level two certification (if applicable):
  • Detonator lines must be recessed.
For level three certification (if applicable):


TC animated belt box.jpg Belt Boxes
For 501st approval:
  • Two rectangular boxes with one mounted on each side of belt.
  • Boxes are painted matte or satin white.
    • The top side of the box is tapered outward.
    • There is an inset detail near the top of each box.
  • Armor is weathered with shades of grey.


150px Holsters
For 501st approval:
  • Holsters are painted satin or matte white.
  • Holsters connect to the belt via matte or satin white straps.
  • White areas are weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Kama
For 501st approval:
  • The kama is made of heavy material.
  • The main area of the kama is a brown-yellow color.
  • The edge trim is a grunge yellow color.
  • The top front edges of the kama should line up with the outside edges of the front two panels of the belt.
  • The back of the kama is split all the way up to the belt.
  • The bottom front corners of the kama are rounded angles.
  • The rear of the kama is slightly longer than the front.
  • The sides of the kama extend to the top of the knee armor.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Thigh Armor
For 501st approval:
  • Armor is painted a grunge yellow color.
  • The front lower area of the armor has a cut out section to math the knee armor.
  • The yellow sections are weathered with heavy scuff marks and patchy areas.
For level two certification (if applicable):
For level three certification (if applicable):
Blankwhite.gif Lower Leg Armor
For 501st approval:
  • Armour is painted matte or satin white.
  • Knee armor is integrated with the lower leg.
  • Knee armor has a grunge yellow stripe painted down the center.
  • The armor has a flat center triangle below the knee plate, with the single point facing downward.
  • The calf detail of the armor has an indented arched section on the back of the leg.
  • The outside of the calf sis seamless.
    • Calves have a trap door access through the arched indent in the rear of the lower leg.
  • The yellow sections are weathered with heavy scuff marks and patchy areas.
  • White areas are weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):


TC animated boots.jpg Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
  • Boots are lace-less and have flat soles.
  • Boots have a center strip running from the toe to the ankle.
  • A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.
For level two certification (if applicable):
  • Boots have accurate notched sole.
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.


CW animated dc17 pistol.jpg DC-17 Hand Blaster (animated style)
For 501st approval:

Manufactured by BlasTech Industries, DC-17 pistols are designed for use as secondary weapons. Because they are widely recognized for their high stopping power and firing rate, many battlefield officers use them as primarily combat weapons.

  • This is the animated variant of the DC-17 blaster.
  • The number of pistols carried is dependent on the amount of holsters.



CRLdc15s-animated.jpg DC-15S Blaster Carbine (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.

  • This is the animated variant of the DC-15S blaster rifle.



Dc15a Animated.jpg DC-15A Blaster Rifle (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.

  • This is the animated variant of the DC-15A blaster rifle.



Blankwhite.gif Republic Backpack
For 501st approval:
  • Standard issue Republic Military backpack with heavy cloth or canvas cover.



This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.