Revision as of 13:53, 10 January 2014 by TK826 (Talk | contribs)
crlblackhd.gif
Kashyyyk Trooper
Missingprofile.jpg
Model MODEL NAME, Photo by PHOTOGRAPHER NAME


Pathfinders.png

Description: Kashyyyk Trooper
Prefix: CB
Detachment: PathFinders
Context: Episode III: Revenge of the Sith


  • This CRL is a work in progress.
  • This costume may be approved by GMLs, but until the library entry is complete, it is suggested that this character first be submitted to the appropriate DL/GML peer review section of the legion forum.
  • If you have this costume and would like to assist with the completion of this library entry, please contact your detachment leader.
  • Please note that the use of the word "should" below does not indicate that the armor piece is considered open to interpretation. All instances of "should be" and "should have" will be replaced with "is" and "has", as this guide is completed.
Required Costume Components

The following costume components are present and appear as described below.

Blankwhite.gif Helmet
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers, weathering recommended .
  • Fan-made helmet.
  • Full set of greeblies - 2 breathers, triangle piece, five bar snout piece and visor bolts.
  • Rectangular slot on the visor measuring 2.5 to 2.75 inches long and 0.75 inches wide - centered in the middle of the visor.
  • Visor with reflective green lens.
  • Note on paint - the INSIDE of the visor is painted the same base colour as the armour, NOT black.
For level two certification (if applicable):


Generic Balaclava.jpg Balaclava
For 501st approval:
  • A balaclava is a black head sock/hood that is worn under the helmet and is used primarily to hide any view of the wearer's skin and/or facial hair.


Kashyyyk Undersuit.jpg Under Suit
For 501st approval:
  • Jacket and pants or jumpsuit with the correct (or as close as possible camouflage pattern). Can be dyed DMP (British) desert camo. Dye them brown and black to get them close.
  • All pockets removed.
  • Leg pouches measuring 7 inches by 5 inches with a biased cut flap on the outside, placed in the correct position.
  • Off-grey/tan or oatmeal riding patch on inner thigh, made of leather or suede.
For level two certification (if applicable):
Kashyyyk Shoulders.jpg Shoulders
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers, weathering recommended .
  • 2 shoulder bells.
For level two certification (if applicable):
Kashyyyk Biceps.jpg Upper Arm Biceps
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon Khaki Tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended,
  • Camo pattern to simulate on-screen troopers – weathering recommended.
  • Left bicep armor must have grey strap and specific greeb - all painted grey.
  • Right bicep armor must have greeblies painted grey.
For level two certification (if applicable):
Kashyyyk Elbows.jpg Elbow Armor
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon Khaki Tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended,
  • Camo pattern to simulate on-screen troopers – weathering recommended.
For level two certification (if applicable):
Blankwhite.gif Forearms
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers – weathering recommended.
  • 2 forearm pieces - with 2 straps for each piece of armour
  • Straps are grey in colour.
For level two certification (if applicable):
Blankwhite.gif Gloves
For 501st approval:
  • Gauntlet-style gloves - black leather to the wrists and brown gauntlet sections.
  • 2 rubber greeblies (grey or taupe) on brown leather gauntlet part of the glove.
  • grey belt around the wrist.
  • No labels/logos, clips or external straps.
For level two certification (if applicable):
Blankwhite.gif Chest
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • camo pattern to simulate on-screen troopers – weathering recommended.
  • 2 grey colored straps connecting the chest and back plates.
  • Flush join at the sides.

.

For level two certification (if applicable):
Blankwhite.gif Back
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Chrome undercoat, matt base colors and camo pattern to simulate on-screen troopers – weathering recommended.
  • Back plate has a tank attached.
    • Top of the tank is flat with a detail piece painted black.
    • Has a black stripe detail.
For level two certification (if applicable):
Kashyyyk Cummerbund.jpg Cummerbund
For 501st approval:
  • No molle vest or variant.
  • Appearance of 2 tones of grey, whether the effect is achieved with weathering or in actual construction.
  • Appearance should suggest a darker base with lighter vertical stripes.
  • Has a midsection belt that goes around cummerbund.
  • 2 vetical black stripes to go on cummerbund belt on the front.
  • 16 pouches of accepted size and shape (note different flap configurations) ;
    • 2 long front pouches
    • 2 small rectangular front pouches
    • 8 small side pouches
    • 2 long back pouches
    • 2 large rectangular back pouches
  • Pouches are either cloth covered and painted with a khaki base + camo pattern or covered with multi-cam cloth.

For level two certification (if applicable):
Blankwhite.gif Belt
For 501st approval:
  • Grey with black insets.
  • Buckle - grey/gunmetal grey.
  • 2 drop boxes with 4 straps hung from belt and belt buckle- are either

cloth covered and painted with camo pattern or covered with multi-cam cloth.

For level two certification (if applicable):
Kashyyyk Codpiece.jpg Cod Piece
For 501st approval:
  • Triangular in shape.
  • Cloth covered and painted in matt base colors and camo pattern to match armour – weathering recommended.
  • Attaches to backside of belt buckle with a small section of hook and loop fastener.
For level two certification (if applicable):
Blankwhite.gif Knees
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers – weathering recommended.
  • 2 pieces of knee armour.
  • Specific black/dark grey straps for each piece of knee armor.
For level two certification (if applicable):
Blankwhite.gif Shins
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers – weathering recommended.
  • 2 complete shin armour pieces that are seamless.
  • 2 khaki or white belts on each shin.
  • Black buckle and a smaller clip on each belt

For level two certification (if applicable):
Blankwhite.gif Boot Caps (Toe Armor)
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers – weathering recommended.
  • 2 pieces of boot armour.
  • 4 black rings, 2 for each boot.
  • 1/2 inch "O" ring.
For level two certification (if applicable):
Kashyyyk Boots.jpg Boots
For 501st approval:
  • Soles have SIMULAR Curved shape in between the heel and sole.
  • Main body of boot is beige coloured - similar to Beige Desert Military Boots.
  • Khaki or tan soles.
For level two certification (if applicable):
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present must meet the guidelines below.


DC15 carbine.jpg DC-15S Blaster
For 501st approval:

Manufactured by BlasTech Industries the DC-15S is smaller in scale than the DC-15A blaster rifle. Although it has a shorter range than that of the "A" model, it is easier to handle with a higher rate of fire. It features a folding stock for braced firing.

  • Blaster rifle may be scratch built out of plastic, wood, metal or cast in resin.
  • Total length is approximately 26“ (66 cm).
    • Because of the scale, the Hasbro version is incorrect.
For level two certification (if applicable):
  • Folding stock (does not need to function).
  • A total of (12) radiator fins are present on the barrel.
  • Spare igniter is present on both sides of barrel.
  • Charge magazine is present on the right side.
For level three certification (if applicable):
  • Charge magazine is metal to gun metal grey in color.
  • Any bolts and screws are metal to gun metal grey in color.
  • Parts of the spare igniter are copper in color.
  • Blaster is weathered.


DC15 rifle.jpg DC-15A Blaster Rifle
For 501st approval:

Manufactured by BlasTech Industries, the DC-15A is a tibanna gas, cartridge powered weapon. Hyper-ionized blue plasma bolts are more than capable of penetrating armored units. Exceptionally effective against both droids and contemporary targets.

  • Blaster rifle is scratch built out of plastic, wood, metal or cast in resin.
  • Total length is approximately 55 inches (139.7 cm).
    • Because of the scale, the Hasbro version is not allowed.
For level two certification (if applicable):
  • A total of (10) radiator fins are present on the barrel.
  • A power setting adjuster is present.
  • The correct style of sniper scope is present.
  • Charge magazine lock is present on the left side.
  • Power setting adjuster, sniper scope and charge magazine lock is metal to gun metal gray in color.
For level three certification (if applicable):
  • Sniper scope is able to be removed from storage position (bottom of rifle) and attached to the top of the rifle.
  • Parts of the spare igniter are copper in color.
  • Front optical sight is able to flip to the up position.
  • Any bolts and screws are metal to gun metal grey in color.
  • Blaster is weathered.

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:CB_Kashyyyk_trooper

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.