Revision as of 08:46, 27 February 2014 by TK826 (Talk | contribs)
crlblackhd.gif
Kashyyyk Trooper
Kashyyyk Trooper.jpg
Model CB 4365, Photo by Nathan L.


Pathfinders.png

Description: Kashyyyk Trooper
Prefix: CB
Detachment: PathFinders
Context: Episode III: Revenge of the Sith.

This unit of Clone Scout Troopers wears camouflaged armor to blend into the surroundings of forest and swamp worlds. This camouflaged armor was essential while fighting in the Battle of Kashyyyk. Clone Scout Troopers are equipped with highly advanced armor, though they wear a protective under-suit which covers the upper legs, and lower arms. Due to the environments in which they operate, they have wider visor plates than the specialized helmets of the standard Biker Scout. This allows for a larger visual area.


  • This CRL is a work in progress.
  • This costume may be approved by GMLs, but until the library entry is complete, it is suggested that this character first be submitted to the appropriate DL/GML peer review section of the legion forum.
  • If you have this costume and would like to assist with the completion of this library entry, please contact your detachment leader.
  • Please note that the use of the word "should" below does not indicate that the armor piece is considered open to interpretation. All instances of "should be" and "should have" will be replaced with "is" and "has", as this guide is completed.
Required Costume Components

The following costume components are present and appear as described below.

Kashyyyk Helmet.jpg Helmet
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers, weathering recommended .
  • Fan-made helmet.
  • Full set of greeblies - 2 breathers, triangle piece, five bar snout piece and visor bolts.
  • Rectangular slot on the visor measuring 2.5 to 2.75 inches long and 0.75 inches wide - centered in the middle of the visor.
  • Visor with reflective green lens.
  • Note on paint - the INSIDE of the visor is painted the same base colour as the armour, NOT black.
For level two certification (if applicable):


Generic Balaclava.jpg Balaclava
For 501st approval:
  • A balaclava is a black head sock/hood that is worn under the helmet and is used primarily to hide any view of the wearer's skin and/or facial hair.


Kashyyyk Undersuit.jpg Under Suit
For 501st approval:
  • Jacket and pants or jumpsuit with the correct (or as close as possible camouflage pattern). Can be dyed DMP (British) desert camo. Dye them brown and black to get them close.
  • There are no visible pockets when the armor is worn.
  • Leg pouches measuring 7 inches by 5 inches with a biased cut flap on the outside, placed in the correct position.
  • Off-grey/tan or oatmeal riding patch on inner thigh, made of leather or suede.
For level two certification (if applicable):
Kashyyyk Shoulders.jpg Shoulders
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers, weathering recommended .
  • 2 shoulder bells.
For level two certification (if applicable):
Kashyyyk Biceps.jpg Upper Arm Biceps
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon Khaki Tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended,
  • Camo pattern to simulate on-screen troopers – weathering recommended.
  • Left bicep armor must have grey strap and specific greeb - all painted grey.
  • Right bicep armor must have greeblies painted grey.
For level two certification (if applicable):
Kashyyyk Elbows.jpg Elbow / Forearm Armor
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers – weathering recommended.
  • 2 forearm pieces - with 2 straps for each piece of armour
  • Straps are grey in colour.
For level two certification (if applicable):
Kashyyyk Gloves.jpg Gloves
For 501st approval:
  • Gauntlet-style gloves - black leather to the wrists and brown gauntlet sections.
  • 2 rubber greeblies (grey or taupe) on brown leather gauntlet part of the glove.
  • grey belt around the wrist.
  • No labels/logos, clips or external straps.
For level two certification (if applicable):
Kashyyyk Chest.jpg Chest
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • camo pattern to simulate on-screen troopers – weathering recommended.
  • 2 grey colored straps connecting the chest and back plates.
  • Flush join at the sides.

.

For level two certification (if applicable):
Kashyyyk Back.jpg Back
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Chrome undercoat, matt base colors and camo pattern to simulate on-screen troopers – weathering recommended.
  • Back plate has a tank attached.
    • Top of the tank is flat with a detail piece painted black.
    • Has a black stripe detail.
For level two certification (if applicable):
Kashyyyk Cummerbund.jpg Cummerbund
For 501st approval:
  • No molle vest or variant.
  • Appearance of 2 tones of grey, whether the effect is achieved with weathering or in actual construction.
  • Appearance should suggest a darker base with lighter vertical stripes.
  • Has a midsection belt that goes around cummerbund.
  • 2 vertical black stripes to go on cummerbund belt on the front.
  • 16 pouches of various size and shape will attach to the cummerbund.
For level two certification (if applicable):
Kashyyyk Pouches.jpg Pouches
For 501st approval:
  • 16 pouches of accepted size and shape.
    • Note: The pouches have different closing flap configurations.
  • Pouches are either cloth covered and painted with a khaki base + camo pattern or covered with multi-cam cloth.
    • 2 long front pouches.
    • 2 small rectangular front pouches.
    • 8 small side pouches.
    • 2 long back pouches.
    • 2 large rectangular back pouches.
For level two certification (if applicable):
Kashyyyk Belt.jpg Belt
For 501st approval:
  • Grey with black insets.
  • Buckle - grey/gunmetal grey.
  • 2 drop boxes with 4 straps hung from belt and belt buckle- are either cloth covered and painted with camo pattern or covered with multi-cam cloth.
For level two certification (if applicable):
Kashyyyk Codpiece.jpg Cod Piece
For 501st approval:
  • Triangular in shape.
  • Cloth covered and painted in matt base colors and camo pattern to match armour – weathering recommended.
  • Attaches to backside of belt buckle.
For level two certification (if applicable):
Kashyyyk Knees.jpg Knees
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers – weathering recommended.
  • 2 pieces of knee armour.
  • Specific black/dark grey straps for each piece of knee armor.
For level two certification (if applicable):
Kashyyyk Shins.jpg Shins
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers – weathering recommended.
  • 2 complete shin armour pieces that are seamless.
  • 2 khaki or white belts on each shin.
  • Black buckle and a smaller clip on each belt

For level two certification (if applicable):
Kashyyyk Toe Armor.jpg Boot Caps (Foot Armor)
For 501st approval:
  • Metallic undercoat; silver or chrome recommended. Can be applied layered style or topically.
  • Amount is dependent on individual troopers.
  • Krylon khaki tan for the base coat.
  • Panzer Olive green or equivalent.
  • Flat Earth brown.
  • Black/grey/white misting recommended
  • Camo pattern to simulate on-screen troopers – weathering recommended.
  • 2 pieces of boot armour.
  • 4 black rings, 2 for each boot.
  • 1/2 inch "O" ring.
For level two certification (if applicable):
Kashyyyk Boots.jpg Boots
For 501st approval:
  • Soles have SIMULAR Curved shape in between the heel and sole.
  • Main body of boot is beige coloured - similar to Beige Desert Military Boots.
  • Khaki or tan soles.
For level two certification (if applicable):
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.


DC15 carbine.jpg DC-15S Blaster
For 501st approval:

Manufactured by BlasTech Industries the DC-15S is smaller in scale than the DC-15A blaster rifle. Although it has a shorter range than that of the "A" model, it is easier to handle with a higher rate of fire. It features a folding stock for braced firing.

  • Realistic Clone Style DC-15S Blaster.
  • Blaster may be scratch built out of plastic, wood, metal or cast in resin.
  • Blaster has realistic Episode II or Episode III details:
    • Wire frame sight.
    • Folding stock.
    • (12) radiator fins evenly spaced along the length of barrel.
    • Igniter detail knobs.
    • Charge magazine clip on right side.
  • Total length is approximately 26“ (66 cm).
  • Because of the scale, the Hasbro version is incorrect.
For level two certification (if applicable):
  • Charge magazine detail on clip is metal to gun metal grey in color.
  • Detail bolts and screws are metal to gun metal grey in color.
  • Igniter knobs have some copper coloring.
  • Blaster is weathered.
For level three certification (if applicable):
  • Functioning Blue LED is installed in barrel.


DC15 rifle.jpg DC-15A Blaster Rifle
For 501st approval:

Manufactured by BlasTech Industries, the DC-15A is a tibanna gas, cartridge powered weapon. Hyper-ionized blue plasma bolts are more than capable of penetrating armored units. Exceptionally effective against both droids and contemporary targets.

  • Realistic Clone Style DC-15A Blaster Rifle.
  • Blaster rifle is scratch built out of plastic, wood, metal or cast in resin.
  • Blaster has realistic Episode II or Episode III details:
    • Flip up sight in down position.
    • (10) radiator fins evenly spaced along the length of barrel.
    • Power setting adjuster detail lever.
    • Sniper Scope attached under rifle in storage position.
    • Charge magazine clip on left side.
    • Igniter detail knobs.
  • Total length is approximately 55 inches (139.7 cm).
  • Because of the scale, the Hasbro version is not allowed.
For level two certification (if applicable):
  • Charge magazine detail on clip is metal to gun metal grey in color.
  • Detail bolts and screws are metal to gun metal grey in color.
  • Igniter has some copper coloring.
  • Power setting adjuster detail lever is metal or gun metal grey.
  • Sniper scope is metal or gun metal grey.
  • Blaster is weathered.
For level three certification (if applicable):
  • Functioning Blue LED is installed in barrel.

This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.