Revision as of 22:06, 3 April 2014 by TK826 (Talk | contribs)
crlblackhd.gif
ARC Trooper Commander - Havoc
Havoc Full.jpg
Model AR 3440, Photo by Ashley Broomhall


Clone-Trooper-Detachment.png

Description: ARC Trooper - Havoc
Prefix: AR
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Season 3

Havoc is an ARC trooper commander serving in the Rancor Battalion.
'


Please note that this costume is also eligible for membership in The Rebel Legion.

The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

Required Costume Components

The following costume components are present and appear as described below.

Havoc Helmet.jpg Helmet
For 501st approval:
  • Helmet is be painted with a base color of matte or satin white.
  • Center blue stripe on dome.
  • Blue Rangefinder with silver stalk.
  • Side ear sections are painted blue.
  • Mirrored Chrome or Black Visor.
  • Grey faceplate.
  • Blue stripes on cheek tubes.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):


TC animated neckseal.jpg Neck Seal
For 501st approval:
  • Neck seal is black in color with no ribbing.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.
For level two certification (if applicable):
  • Neck seal closes in the front via 2 small black snaps.
TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Pauldron.jpg Pauldron
For 501st approval:
  • Double sided pauldron.
  • Black base with blue panels.
  • Attaches to top front of chest above the outer chest armor.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Shoulders.jpg Shoulder Bells
For 501st approval:
  • Armor is painted matte or satin white.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Biceps.jpg Upper Arm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
  • Armor must be seamless.
    • No visible traces of how the armor was assembled should be shown.
For level three certification (if applicable):
Havoc Forearms.jpg Forearm Armor
For 501st approval:
  • The left arm armor is painted matte or satin white.
  • The right arm armor is painted grey.
  • Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Handplates.jpg Hand Plates
For 501st approval:
  • Painted with a base color of matte or satin white.
  • Hand plates are mirror images of each other.
  • Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
  • Blue stripe on right hand only.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Chest Inner.jpg Chest Armor: Inner
For 501st approval:
  • Inner chest armor is painted with a base color of matte or satin white.
  • Lower section of chest armor has a rounded cut-out section to match the abdomen armor.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Chest Outer.jpg Chest Armor: Outer
For 501st approval:
  • Outer chest armor is painted grey.
  • Four Light blue squares with four smaller dark blue squares painted on top of them.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Ammo Pouch.jpg Ammo Pouch
For 501st approval:
  • On the right side of the chest armor, over the right breast, there is a three compartment black ammo pouch.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Back.jpg Back Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Backpack.jpg Backpack
For 501st approval:
  • Backpack is painted a dark blue.
  • Side disc details are painted olive green.
  • Round detail and large rectangle, on rear of backpack, is painted a Nutmeg / Brown color.
  • Components attached to pipes are satin white.
  • Rectangles on each side of pack are painted Slate Blue.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Abdomen.jpg Ab Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Top edge of the armor is curved to match the chest.
  • The ab armor protrudes out in the middle to match the shape of the chest armor.
  • 4 inset lines divide the ab plate into segments.
  • A butted seam between ab plate and kidney is acceptable.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Kidney.jpg Kidney Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • A butted seam between ab plate and kidney is acceptable.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Codpiece.jpg Cod Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Integrated belt section is approx 3" tall and divided into segments.
  • Two larger boxes attached (one on each side).
    • Note: Side boxes not to be confused with the additional small front belt boxes.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Posterior.jpg Posterior Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Integrated belt section is approx 3" tall and divided into segments.
  • Cod and Posterior armor should connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Detonator is centered on the back of belt.
    • There no control buttons.
  • Detonator has 2 lines set in approx 1/2" - 5/8" from the edges. Lines may be recessed or painted on.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Belt Boxes.jpg Belt Boxes
For 501st approval:
  • Two white front boxes
  • Two black rear boxes.
  • Boxes cover attachment points of the holster straps.
  • The armor piece is weathered with shades of grey.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Thigh Boxes.jpg Thigh Boxes and Holsters
For 501st approval:
  • Holsters and Thigh boxes are attached to the X-crossing double waist straps.
  • Belt straps travel at an upward angle and attach behind the front and rear belt boxes.
  • Thigh Boxes have a flat grey upper section and a dark grey lower section.
  • Holsters are colored black.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Kama.jpg Kama
For 501st approval:
  • The kama must be made of black leather, leather like material, or heavy canvas.
  • The kama is grey with blue trim and center panels that match the color of the armor pieces.
  • The front edges of the kama should line up with the outside edges of the front two panels of the belt.
  • The back of the kama is split all the way up to the belt.
For level two certification (if applicable):
For level three certification (if applicable):
150px Thigh Armor
For 501st approval:
  • Armor is painted matte or satin white.
For level two certification (if applicable):
  • Armor should be seamless.
    • No visible traces of how the armor was assembled should be shown.
For level three certification (if applicable):
Havoc Shins.jpg Lower Leg Armor
For 501st approval:
  • Painted with base color of grey.
  • Knee armor is integrated into the top of the armor piece.
  • Knee area is painted blue.
  • Rectangle details are painted gold.
For level two certification (if applicable):
For level three certification (if applicable):
Havoc Foot Armor.jpg Boot Caps (Foot Armor)
For 501st approval:
  • Painted with base color of grey.
  • Blue stripes.
  • Boot caps Attach to boots with hook and loop fastener (Velcro).
For level two certification (if applicable):
For level three certification (if applicable):


TC animated boots.jpg Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
  • Boots are lace-less and have flat soles.
  • Boots have a center strip running from the toe to the ankle.
  • A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.
For level two certification (if applicable):
  • Boots have accurate notched sole.
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.


CW animated dc17 pistol.jpg DC-17 Hand Blaster (animated style)
For 501st approval:

Manufactured by BlasTech Industries, DC-17 pistols are designed for use as secondary weapons. Because they are widely recognized for their high stopping power and firing rate, many battlefield officers use them as primarily combat weapons.

  • This is the animated variant of the DC-17 blaster.
  • The number of pistols carried is dependent on the amount of holsters.



CRLdc15s-animated.jpg DC-15S Blaster Carbine (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.

  • This is the animated variant of the DC-15S blaster rifle.


This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:AR_CW-animated_havoc

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.