Revision as of 08:51, 26 May 2014 by TK826 (Talk | contribs)
crlblackhd.gif
ARC Trooper - Colt
Colt.jpg
Model Unknown, Photo by Unknown


Clone-Trooper-Detachment.png

Description: ARC Trooper - Colt
Prefix: AR
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Season 3

Colt serves in the Grand Army of the Republic as the commander of Rancor Battalion. Although no stranger to battle, Colt primarily works alongside ARC troopers Havoc and Blitz to evaluate clone cadets' final stage of training, looking for those with potential to become ARC troopers.
'


Please note that this costume is also eligible for membership in The Rebel Legion.

The 501st approval requirements are listed in black.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

For 501st membership only the requirements in black need to be met.

IMPORTANT: The "Animated" armor design, seen in The Clone Wars CG Series, differs from the "Realistic" armor design used to create characters from the theatrical films and graphic novels.
See this thread at clonetroopers.net for the differences between the sculpts.

  • This CRL is a work in progress.
  • This costume may be approved by GMLs, but until the library entry is complete, it is suggested that this character first be submitted to the appropriate DL/GML peer review section of the legion forum.
  • If you have this costume and would like to assist with the completion of this library entry, please contact your detachment leader.
  • Please note that the use of the word "should" below does not indicate that the armor piece is considered open to interpretation. All instances of "should be" and "should have" will be replaced with "is" and "has", as this guide is completed.
Required Costume Components

The following costume components are present and appear as described below.

Blankwhite.gif Helmet
For 501st approval:
  • Helmet is painted matte grey.
  • Skull motif is painted on front of dome and entire faceplate.
    • Skull design is painted matte or satin white.
  • Black eye lens.
  • Red rangefinder with silver stalk on right side of helmet.
  • Ear cap on left side of helmet is painted matte or satin white.
  • Chin area and front portion of cheek tubes are painted matte grey.
  • Sides of cheek tubes and lower rear of helmet is painted matte or satin white.
  • Armor is weathered with shades of grey.



TC animated neckseal.jpg Neck Seal
For 501st approval:
  • Neck seal is black in color with no ribbing.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.
For level two certification (if applicable):
  • Neck seal closes in the front via 2 small black snaps.


TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


Blankwhite.gif Pauldron
For 501st approval:
  • Double sided pauldron.
  • Black base.
  • Left shoulder has black panels.
  • Right shoulder has red panels.
  • Attaches to top front of chest above the outer chest armor.


Blankwhite.gif Shoulder Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Shoulders are padded so as not to rest flat against the arms.
    • The top of the bell sits 3/4" - 1" above the natural shoulder.
  • The armor is weathered with shades of grey.


Blankwhite.gif Upper Arm Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
  • The armor piece is weathered with shades of grey.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.


Blankwhite.gif Forearm Armor
For 501st approval:
  • The top of left forearm is painted red.
  • The bottom of left forearm is painted grey.
  • Left forearm includes a compad with four square buttons.
    • The front two buttons are white followed by a red button and a green button.
  • Mounted on the top of the left forearm is a small rocket.
  • The right forearm is painted grey.
    • The multi-square detail line on top of right forearm, from the wrist to elbow, is painted red.
  • Elbow plates are integrated into the forearm, extending up to fit into the notch on the bicep armor.
  • The armor is weathered with shades of grey.


Blankwhite.gif Hand Plates
For 501st approval:
  • Left hand plate is painted red.
  • Right hand plate is painted grey.
  • Hand plates are mirror images of each other.
  • Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
  • The armor is weathered with shades of grey.



Generic-black-gloves.jpg Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.


Blankwhite.gif Chest Armor: Inner
For 501st approval:
  • Inner chest armor is painted matte or satin white.
  • Lower section of chest armor has a rounded cut-out section to match the abdomen armor.
  • The armor is weathered with shades of grey.


Blankwhite.gif Chest Armor: Outer
For 501st approval:
  • Outer chest armor is painted grey.
  • The armor is weathered with shades of grey.


Havoc Ammo Pouch.jpg Ammo Pouch
For 501st approval:
  • On the right side of the chest armor, over the right breast, there is a three compartment black ammo pouch.


Blankwhite.gif Back Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Rear center of back armor has detailed area that contains a O11 pattern.
  • Shoulder straps are placed over the chest and back armor at the seams.
  • Armor is weathered with shades of grey.


Blankwhite.gif Backpack
For 501st approval:
  • Backpack is painted a dark blue.
  • Side disc details are painted olive green.
  • Round detail and large rectangle, on rear of backpack, is painted a Nutmeg / Brown color.
  • Components attached to pipes are satin white.
  • Rectangles on each side of pack are painted slate blue.


Blankwhite.gif Abdomen Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Top edge of the armor is curved to match the chest.
  • The ab armor protrudes out in the middle to match the shape of the chest armor.
  • 4 inset lines divide the ab plate into segments.
  • Abdomen armor and kidney armor connect at the sides with no open gap.
    • A butted seam between abdomen and kidney armor is acceptable.
  • The armor piece is weathered with shades of grey.


Blankwhite.gif Kidney Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Abdomen armor and kidney armor connect at the sides with no open gap.
    • A butted seam between abdomen and kidney armor is acceptable.
  • The armor piece is weathered with shades of grey.


Blankwhite.gif Codpiece and Belt front
For 501st approval:
  • Armor is painted matte or satin white.
  • Integrated belt section is approx 3" tall and divided into segments.
  • Two larger boxes attached (one on each side).
    • Note: Side boxes not to be confused with the additional small front belt boxes.
  • The codpiece and posterior armor connect at the hips.
    • Butted seams are permitted at this connection if required.
  • The armor is weathered with shades of grey.


Blankwhite.gif Posterior Armor and Belt rear
For 501st approval:
  • Armor is painted matte or satin white.
  • Integrated belt section is approx 3" tall and divided into segments.
  • Posterior armor and codpiece connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Detonator is centered on the back of belt.
    • There no control buttons.
  • Detonator has 2 lines set in approx 1/2" - 5/8" from the edges. Lines may be recessed or painted on.
  • The armor is weathered with shades of grey.
For level two certification (if applicable):

Detonator lines are recessed.

Blankwhite.gif Belt Boxes
For 501st approval:
  • Two white front boxes
  • Two black rear boxes.
  • Boxes cover attachment points of the holster straps.
  • The armor is weathered with shades of grey.


Havoc Thigh Boxes.jpg Thigh Boxes and Holsters
For 501st approval:
  • Holsters and Thigh boxes are attached to the X-crossing double waist straps.
  • Belt straps travel at an upward angle and attach behind the front and rear belt boxes.
  • Thigh Boxes have a flat grey upper section and a dark grey lower section.
  • Holsters are colored black.


Blankwhite.gif Kama
For 501st approval:
  • The kama is made of a heavy material or heavy canvas.
  • Kama has grey trim.
  • The panels have a pattern consisting of slanted, red and grey "Hazard" Stripes.
  • The front edges of the kama line up with the outside edges of the front two panels of the belt.
  • The back of the kama is split all the way up to the belt.



TC animated thighs.jpg Thigh Armor
For 501st approval:
  • Armor is painted matte or satin white.
  • Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
  • From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
  • The upper outer edge has an angled section.
  • The armor is weathered with shades of grey.
For level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
Blankwhite.gif Lower Leg Armor
For 501st approval:
  • Painted with base color of grey.
  • Knee armor is integrated into the top of the armor piece.
    • Knee area is painted matte or satin white.
  • Rectangle details are painted gold.
  • The armor is weathered with shades of grey.


Blankwhite.gif Boot Caps (Foot Armor)
For 501st approval:
  • Boot caps are painted grey.
  • Armor attaches to boots with hook and loop fastener.



TC animated boots.jpg Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
  • Boots are lace-less and have flat soles.
  • Boots have a center strip running from the toe to the ankle.
  • A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.
For level two certification (if applicable):
  • Boots have accurate notched sole.
Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present must meet the guidelines below.


CW animated dc17 pistol.jpg DC-17 Hand Blaster (animated style)
For 501st approval:

Manufactured by BlasTech Industries, DC-17 pistols are designed for use as secondary weapons. Because they are widely recognized for their high stopping power and firing rate, many battlefield officers use them as primarily combat weapons.

  • This is the animated variant of the DC-17 blaster.
  • The number of pistols carried is dependent on the amount of holsters.



CRLdc15s-animated.jpg DC-15S Blaster Carbine (animated style)
For 501st approval:

Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.

  • This is the animated variant of the DC-15S blaster rifle.


This document and all of the images within were created by and are the property of the 501st Legion. All other uses are prohibited.

This CRL is available as a PDF at www.501st.com/databank/Costuming:AR_CW-animated_colt

The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. ©2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

Visit www.501st.com to learn more.
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.