crlblackhd.gif
Republic Commando
500px
Model MODEL NAME, Photo by PHOTOGRAPHER NAME


Clone-Trooper-Detachment.png

Description: Republic Commando
Prefix: RC
Detachment: Clone Trooper Detachment
Context: Republic Commando:Video Game, Republic Commando novels, Star Wars Insider
Veering away from rogue clone individuals, the Kaminoans took as their example the fiercely efficient hunting pods of the native aiwha. Candidates were plucked from the regular clone batch, and segregated into groups of four. During their training and education, these "pods" were kept together, forced to depend upon each other, and pitted against other pods in combat. The Kaminoans soon found they had a number of small squads, each highly-trained and fiercely-cohesive, yet divisible into smaller units for varied mission profiles. Ultimately, neither the regular army clones nor the ARC troopers could match them when it came to organization and team-work. The experiment was a success.


This CRL is a work in progress and is not yet ready to use for GML approval!

Costume Components
150px Helmet
For 501st approval:
  • RC style Clone Helmet - Fanmade Bucket.
  • Helmet should be painted matte white or light gray.
  • Dark Blue Mirrored Visor
  • Helmet LED holder on right side of helmet with LED bulb.
  • Visor EL Wire (Blue), LED and Acrylic Rod also acceptable.
  • 2 Aerators.
  • Chin greebly detail piece.
For level two certification (if applicable):
{{{4}}}
For level three certification (if applicable):
{{{5}}}
150px Neck Seal
For 501st approval:
  • The neck seal has horizontal ribs, between 1/4" and a 1/2" thick. There is the 'bib' that covers the entire area within the neckline of the chest/back armor. The 'bib' should include the trapezoidal detail shapes and can be done with or without 3-dimensional features.
For level two certification (if applicable):
For level three certification (if applicable):
TK anh stunt undersuit.jpeg Under Suit
For 501st approval:
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.
For level two certification (if applicable):
For level three certification (if applicable):
150px Shoulder Bells
For 501st approval:
  • Armor should be painted matte white or light gray.
  • Shoulders should be oval in shape with all rounded edges.
  • Shoulder bells shall have recessed or attached resin detail in the centers.
For level two certification (if applicable):
For level three certification (if applicable):
150px Upper Arm Armor
For 501st approval:
  • Armor should be painted matte white or light gray.
  • Should have a dimple on the lower area of the back of the arm. The outside of the bicep should have a hard line edge at the front that turns in. The inside of the upper arm should be rounded.
  • Armor should be seamless. No visible traces of how the armor was assembled should be shown.
For level two certification (if applicable):
For level three certification (if applicable):
150px Elbow Armor
For 501st approval:
  • Armor should be painted matte or satin white
  • There are two elbows. On each elbow on the outside of the body near the connection point of the elbow strap there should be detail slots that look like an equal symbol on both elbow pieces.
  • Both elbows have strapping. The straps should have a raised detail line at the top and bottom of the strap.
For level two certification (if applicable):
For level three certification (if applicable):
  • Elbows should be mirror images of each other with a notched area on the outside of the elbow above the detail marks.
150px Forearm Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Both left and right forearms should be mirror images of each other.
  • Right forearm should have a compad that has 8 small buttons,1 Large main button, and 1 slightly smaller rectanular button.
  • Forearm tops should have a flattened triangular area that have a ridge that comes to a point at the top of the forearm.
  • Armor should be seamless. No visible traces of how the armor was assembled should be shown.
For level two certification (if applicable):
For level three certification (if applicable):
  • Compad has detail antenna on its left.
  • Instead of a hard edge the top of the forearm has a bone ridge.
150px Hand Plates
For 501st approval:
  • Armor should be painted matte or satin white
  • Hand plates are mirror images of each other.
  • Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand.
For level two certification (if applicable):
For level three certification (if applicable):
150px Gloves
For 501st approval:
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin.
For level two certification (if applicable):
For level three certification (if applicable):
150px Chest Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Two detail slots on right breast.
  • Chest and back plate should match together at the sides with no gap, just a seam line.
  • Shoulder straps should be placed underneath the chest to connect to the back.
For level two certification (if applicable):

For level three certification (if applicable):
  • Shoulder straps should be slotted into the chest into the detail ridges of the top connection points.
150px Back Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Rear tank has detailed area that contains 4 circles. Under the circles at the left side of the back there should be two parallel lines and the the right of the back there should a be a squared detail.
  • Chest and back plate should match together at the sides with no gap, just a seam line.
  • Shoulder straps should be placed underneath the chest to connect to the back.
For level two certification (if applicable):

For level three certification (if applicable):
  • Shoulder straps should be slotted into the Back into the detail ridges of the top connection points.
  • Highly detailed resin insert should replace softer details.
150px Ab Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Four 1/4" diameter holes per side on indents of ab plate, eight holes total.
  • Ab section should wrap around the wearers body and be sealed at the sides or at the back.
  • Ab section should be completely contained under the chest and back armor.
For level two certification (if applicable):

For level three certification (if applicable):
  • Ab section should be seamless at the sides and close in the back. A detail plate should cover the seam line and hide all work.
150px Cod and Posterior Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Cod and Posterior armor should connect at the hips.
For level two certification (if applicable):
For level three certification (if applicable):
  • Hips should be connected via a snap with the correct detailed shape of the armor at the connection point.
150px Belt
For 501st approval:
  • Armor should be painted matte or satin white.
  • Ammo Belt with boxes and detonator.
  • Detonator is centered on the back of belt.
  • 8 boxes total, 4 on each side of abdomen and attached to the belt.
For level two certification (if applicable):

For level three certification (if applicable):
  • Belt Boxes should be notched and fitted flush with the details of the belt.
  • Left Rear belt box should have two square buttons in the top left corner and and equal symbol detail at the bottom right.
  • Right Rear belt box should have a bar with two small cylinders centered with and equal symbol detail on the bottom left.
  • From the rear two belt boxes the belt should have a ribbed detailed appearance.
150px Thigh Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Front of thigh armor should have a flat triangular area near the knee. From the top of the triangle a ridge line should go up the front of the thigh to the top.
  • Rear of the thigh should have an indention.
  • Armor should be seamless. No visible traces of how the armor was assembled should be shown.
For level two certification (if applicable):

For level three certification (if applicable):
  • Outside of lower portion of the thighs should come to a point and inner lower end should be rounded.
150px Knee Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Knees should wrap around the front of the leg. From top center a raised detail line should be present.
  • Knees should be strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the Knee.
For level two certification (if applicable):

For level three certification (if applicable):
  • Center strap should be primer gray.
  • Connection between the knee and the strapping should have a detail clip.
150px Lower Leg Armor
For 501st approval:
  • Armor should be painted matte or satin white.
  • Lower Legs are mirror images of each other. The front of the armor should have a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
  • Back of the lower legs should have an indentation just under the calf the follow down to the ankle.
  • Calf can have an access area on the inside of the leg. The outside of the calf should be closed.
For level two certification (if applicable):

For level three certification (if applicable):
  • Calves should be seamless and have a trap door access through the indent in the rear of the lower leg.
  • Outside of the lower leg should have a pointed tip at the top and the inside of the lower leg should be rounded off at the top.
150px Boots
For 501st approval:
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor. Boots must be lace-less and have flat soles. The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap. There should be no markings or labels from the shoe makers. Boot soles should be primer gray.
For level two certification (if applicable):
For level three certification (if applicable):
Costume Accessories:
150px DC-15 Carbine Short Rifle
For 501st approval:

For level two certification (if applicable):
For level three certification (if applicable):
150px DC-15 Long Rifle
For 501st approval:

For level two certification (if applicable):
For level three certification (if applicable):
Personal tools
The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred Imperial costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © & ™ Lucasfilm Ltd. All rights reserved. Used under authorization.